Files
worklane/AGENTS.md
T
Ansho ReiandClaude Opus 5 e20396ce6b (322150c) Make mv crash-safe by writing before renaming, and bump to 0.3.3
cmd_mv renamed the ticket into its new directory and only then wrote the updated
content, so a write that failed left the ticket in the target directory still
claiming the old status. Reproduced with a read-only ticket file: the move
reported a bare "Permission denied" and left the file in committed/ carrying
"Status: backlog".

move_ticket_file now stages the content in a temp file, renames it over the
source, and only then renames the file into the target directory. Two atomic
steps, so a partial write is discarded and the original is untouched. The other
obvious order, writing to the target and deleting the source afterwards, was
rejected because it has the ticket in two directories at once.

The worst case left is a ticket still in its old directory with a Status one
move ahead, which the next mv corrects since the directory is what decides the
current status. Tested, including the retry.

The temp file is staged under .worklane/ rather than beside the ticket, so a
leftover from a hard kill is invisible to ticket lookup and to the listing
instead of appearing as a stray untitled ticket. IO errors now name the ticket
and the path rather than propagating bare.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 23:12:17 +02:00

89 lines
7.7 KiB
Markdown

# AGENTS.md
## Project Structure
- `src/main.rs` - All application logic
- `src/command.rs` - CLI argument definitions using clap derive
- `tests/` - Integration tests using `assert_cmd` and `assert_fs`
- Ticket files stored as `.md` in `.worklane/<status>/` directories
## Ticket File Format
- Filenames: `<uuid_v4>_<slug>.md`
- Metadata fields parsed by `parse_ticket_field()`: `ID`, `Priority`, `Tags`, `Due`, `Owner`, `Created At`, `Status`
- Format: `**Field Name**: value`
- Ticket structure: `# Title` → `## Description` → `## Acceptance Criteria` → `## Implementation Plan` → `## Metadata`
- Comments stored in `.worklane/comments/<ticket_uuid>/<timestamp>.md` with `**Comment**`, `**Author**`, `**Time**` fields
## Status Workflow
`backlog` → `committed` → `reviewing` → `done`
## Testing
- Run: `cargo test`
- Tests use `assert_cmd` and `assert_fs` for CLI testing
- `setup_worklane()` creates temp `.worklane/` with all four status folders pre-created
- `create_ticket()` writes fully-formed markdown files directly (no `--` separator for positional args in test commands)
## Coding Guidelines
### Rust Style
- Use `if matches!(expr, Variant)` instead of `if let Some(Variant) = expr` for enum variant matching
- Use `if let Some(x) = expr` instead of `if let Some(Some(x)) = expr` — drop unnecessary nesting
- Prefer explicit `match` over `unwrap_or_default()` for clarity
- Use `unwrap_or_else(|| expr)` for lazy defaults, `unwrap_or(val)` for eager defaults
- Use `anyhow!()` with context strings that include identifying info (e.g. UUID, title) not bare values
### CLI Arguments
- The prose arguments carry `allow_hyphen_values`, via the `PROSE` constant in `command.rs`: `add --title`, `--description`, `--acceptance`, `--plan`, and the `comment` body. Ticket text quotes flag names constantly, and without it a criterion reading `--print is supported` is parsed as a flag and the whole ticket is refused with nothing written
- **The trade:** on those five arguments a genuinely mistyped flag now lands as content rather than raising a usage error. That is the right way round for prose and the wrong way round for anything else, which is why `due`, `priority`, `tags`, `owner` and `status` are deliberately left without it. A mistyped flag there is still a usage error, exit 2, and no ticket is written. Do not add `PROSE` to a new argument unless it holds prose
- The ticket positionals (`show <id>`, `mv <ticket>`, `comment <ticket>`) are also left alone, so a search term starting with a hyphen is a usage error. Reachable now that a hyphen-leading title can be stored: use the UUID, or put the flags first and separate with `--`, as in `mv --status committed -- -leading-title`
- A bare `--` is a value when it follows an option (`--title -- ` stores `--`) and clap's end-of-options marker when it sits in a positional. So a `comment` body of exactly `--` needs its own separator, `comment <ticket> -- --`. Without it the body is reported missing and nothing is written, which is a clear failure rather than a silent drop
- `add` has no positionals, so anything after a bare `--` is an unexpected argument and fails
### Color and Output
- Use `color_text()` helper for colored output — it respects `should_use_colors()` (terminal detection)
- Color codes are defined in `get_color()`: red (31), cyan (36), orange (33), green (32), grey (38;5;8), magenta (1;35), brightred (38;5;9)
- Reset color with `\x1b[0m` after colored text
- Bold uses `\x1b[1;35m` (magenta bold)
- Always test color output works correctly in both terminal and pipe modes
- `quiet_broken_pipe()` runs first in `main`, restoring the default `SIGPIPE` disposition. A truncated pipe therefore kills the process with signal 13, which a shell reports as 141, instead of making `println!` panic. Do not wrap prints to handle write errors and do not reinstate `SIG_IGN`; the exit codes are documented in the README
### Color Guideline
- UUID → red (31)
- Status → orange (33)
- Timestamp → cyan (36)
- Title → green (32)
- Unknown values (`_None_`, `_Not set_`) → grey (38;5;8)
- Priority ramp → brightred (1), red (2), orange (3), cyan (4), grey (5). Green is deliberately absent: it means title
- Grey is indexed colour 8 in the 256-colour form, not SGR 90 or 37. Both of those failed on a real palette: 90 leans on the bright-black slot and 37 can sit on top of the default foreground. `\x1b[38;5;8m` is byte for byte what crossterm emits for ratatui's `Color::DarkGray`, the grey frig and pantop use for dimmed rows
### Code Organization
- Colorization functions (`colorize_line`, `colorize_ordered`, `content_trim_colored`) handle markdown formatting
- `show` renders the Metadata section as a two column table via `render_metadata_table`, not line by line. Column width is measured on the raw field names in characters and padding is applied before anything is styled: measuring a coloured string counts its escapes towards its width. `paint()` is `color_text()` with the colour decision passed in, which is what lets a test render both ways in one process
- The title is printed once, by `cmd_show`. `content_trim_colored` skips the `# ` heading in the file content
- Rules under headings are measured on the displayed name in characters, never on the raw line or in bytes
- `resolve_ticket()` scans all status directories — it's the single source for ticket lookup by UUID prefix, title, or filename
- `parse_ticket_field()` handles extracting metadata values from markdown format
- `move_ticket_file()` stages the updated content in a temp file under `.worklane/`, renames it over the source, and only then renames the file into the target directory. Do not reorder these: renaming first and writing second leaves a ticket in its new directory claiming the old status, and writing to the target then deleting the source puts it in two directories at once. The temp lives outside the status directories so a leftover is never read as a ticket. A failure at the last step leaves the ticket in its old directory with a Status one move ahead, which the next `mv` corrects
- Field lookup, read and write, is scoped to the lines under the `## Metadata` heading and anchored to the start of the line. Prose above it is free text: tickets in this repo quote field markers in their descriptions, and an unscoped search reads or rewrites those instead. `set_status_field()` carries the same scoping
### Ticket Resolution
- `resolve_ticket()` returns `(status, title, content)` tuple
- Priority: exact UUID prefix (8+ chars) > title substring > filename substring
- Ambiguous matches (multiple results) print options and exit(1)
- Never return empty strings for required fields — use `_Not set_` or `_None_` as defaults
### Git Workflow
- Commit format: `([ticketID]) [short description]`
- Use `--fixup` for incremental changes
- Test before moving to reviewing status
### Version Bumps
- Before every commit, decide whether the change warrants a version bump in `Cargo.toml`
- Always ask the user to confirm the bump and its kind before making it — never bump silently, and never skip the question because the answer looks obvious
- Pre-1.0, so: patch for fixes and internal changes, minor for a new command, flag or changed output, major only for a deliberate 1.0
- No bump for docs-only, tests-only or `--fixup` commits
- When one body of work spans several commits, bump once on the final commit rather than on each
- Bump `Cargo.toml` and the `worklane` entry in `Cargo.lock` together, in the commit that carries the bump
- Every bump gets a matching annotated tag, `v<version>`, on the bump commit — a bumped version is never left untagged
- Tag locally only; never push a tag unless asked
- `worklane --version` reports the crate version alongside the build sha, so the bump is what makes one release distinguishable from another