Files
worklane/.opencode/skill/worklane-kanban-skill/SKILL.md
T
Ansho ReiandClaude Opus 5 b56b31d2d9 (f39b651) Add chown for the ticket owner, and bump to 0.10.0
The Owner field had no writer after `add`. It was folded into `set` in da03690
and comes out here as its own command, so no field is writable from two places,
the same reasoning that keeps status in `mv` alone.

`worklane chown alice 641e3d5`, user first, after Unix `chown`. That reverses
the ticket-first order `mv`, `comment` and `show` use, deliberately: the name
borrows the Unix association, so the argument order borrows it too.

The swap is left to resolution rather than checked for. Given `chown 641e3d5
alice` the second argument has to resolve as a ticket, and a bare username does
not, so the call fails on its own; a check on the first argument would only fire
where resolution already refuses and would stay silent on the one case it cannot
catch, a ticket whose title is the username. `cmd_chown` is therefore
`set_metadata_field` plus `save_ticket`, with the whole-file no-op comparison
`set` uses and the same `report()` line, so an owner set to the value it already
holds is reported unchanged and nothing is written.

Nothing new writes a file: the update goes through `write_then_replace`, scoped
to the lines under `## Metadata`, so a description quoting `**Owner**:` is left
as prose and a failure leaves the ticket whole. Tested for the change, the
no-op, all three resolution tiers, a swapped call, an empty user, a ticket with
no Owner field, and that the tick, the handwritten section and the filename all
survive.

The skill and the opencode tool carry it too, the tool with the argument order
in its description, since that is the one place a model can get it wrong
without failing.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 18:35:26 +02:00

224 lines
7.8 KiB
Markdown

---
id: worklane_kanban
name: worklane_kanban
version: 1.0.0
description: >
Creates Kanban-style tickets in Worklane using the `worklane add` CLI command.
Supports listing tickets with `worklane ls`. Both commands support title, description,
acceptance criteria, implementation plan, tags, due date, owner assignment, and status filtering.
rendering:
strategy: cli_args
join_arrays_with: ","
omit_empty: true
---
# Worklane Kanban Skill
Use this skill when creating, listing, or managing Kanban-style tickets via the `worklane` CLI.
When asked to "create a ticket", use the `worklane add` command.
When using backticks in the command arguments, escape them so the terminal doesn't execute them.
When asked to "implement", "work on" or "read" a ticket, use the `worklane show` command.
## Commands
### `worklane add`
Add a new ticket to the backlog.
**Required:**
- `--title` (or `-t`): Ticket title
**Optional:**
- `--description` (or `-d`): Ticket description
- `--acceptance` (or `-a`): Acceptance criteria (repeat flag for each criterium)
- `--plan` (or `-p`): Implementation plan steps (repeat flag for each step)
- `--tags` (or `-g`): Tags (comma-separated)
- `--due`: Due date in YYYY-MM-DD format. No short form
- `--owner` (or `-o`): Owner name
- `--priority`: Priority level, 1 (most urgent) to 5 (least). Unset if omitted. No short form
Tags are `-g`, not `-t`: `-t` is the title, and passing it twice is an error. Each
plan step needs its own `-p`, since a bare value after one is not a second step.
```bash
worklane add -t "Implement login" -d "Add user login page" -g login,auth -p "Design UI" -p "Build backend" -p "Write tests" --due 2026-06-01 --owner "ilya"
```
When there's multiple acceptance criteria, add each using a separate `--acceptance` or `-a` flag.
When there's mulitple steps to the implementation plan, add each using a separate `--plan` or `-p` flag.
```bash
worklane add -t "Implement logic" -a "Acceptance criterium 1" -a "Acceptance criterium 2" -p "Step 1" -p "Step 2"
```
### `worklane ls`
List tickets, optionally filtered by status.
**Valid statuses:** `backlog`, `committed`, `reviewing`, `done`
```
worklane ls # List all tickets
worklane ls backlog # List tickets in backlog
worklane ls done # List completed tickets
worklane ls --priority 1 # Only the most urgent, any status
worklane ls backlog --priority 2 # Composes with the status filter
```
Tickets are listed priority first, then by title. Tickets with no priority sort last.
### `worklane show`
Show the full details of a single ticket by UUID or title.
```
worklane show "ticket title or uuid"
```
### `worklane mv`
Move a ticket between statuses.
**Positional arguments:**
- `<id>`: Ticket UUID prefix (4+ characters) or title
**Required options:**
- `--status <target>`: Target status (`backlog`, `committed`, `reviewing`, `done`)
**Options:**
- `-f`: Force move (allows skipping stages and backward moves)
**Default behavior:** Only allows forward moves, one stage at a time (`backlog` -> `committed` -> `reviewing` -> `done`).
Examples:
```bash
worklane mv ticket-id --status committed # Move forward one stage
worklane mv ticket-title --status reviewing -f # Force skip stages
worklane mv a1b2c3d4 --status committed # Move by UUID prefix
worklane mv "My Ticket" --status done -f # Move by title with force
```
### `worklane set`
Replace fields on an existing ticket. Only the fields given are touched; ticked
criteria and handwritten sections are left alone. At least one field is required.
**Positional arguments:**
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
**Options:** `--title`, `--description` (or `-d`), `--acceptance` (or `-a`), `--plan`
(or `-p`), `--tags` (or `-g`), `--due`, `--priority`
Owner is not settable here, and neither is status: `chown` owns owner and `mv` owns
status. Changing the title renames the file, keeping the UUID.
```bash
worklane set a1b2c3d4 --priority 1
worklane set a1b2c3d4 --title "A clearer title" --due 2026-12-31
worklane set a1b2c3d4 -a "First criterium" -a "Second criterium"
```
### `worklane append`
Add to a section without replacing what is there. The description gains a new
paragraph; criteria and steps go on the end of their lists, steps numbered on from
the last. At least one section is required.
**Positional arguments:**
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
**Options:** `--description` (or `-d`), `--acceptance` (or `-a`), `--plan` (or `-p`)
```bash
worklane append a1b2c3d4 -d "A paragraph amending the description."
worklane append a1b2c3d4 -a "One more criterium"
worklane append a1b2c3d4 -p "A later step"
```
### `worklane chown`
Set the owner of a ticket. The only command that writes the Owner field: `set` does
not offer it.
**Positional arguments:**
- `<user>`: The new owner. Free text, checked against nothing
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
The user comes first and the ticket second, after Unix `chown`. That is the one
command here that does not start with the ticket, so mind the order: swap the two and
the call fails, because the username has to resolve as a ticket. An owner set to the
value it already holds is reported unchanged and nothing is written.
```bash
worklane chown alice a1b2c3d4
worklane chown "Ansho Rei" "A clearer title"
```
### `worklane check` and `worklane uncheck`
Tick or untick a single acceptance criterion. Every other criterion keeps its state,
and handwritten lines in the section are left alone.
**Positional arguments:**
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
- `[criterion]`: The number as shown by `worklane show`, or a substring of its text
Omit the criterion and the numbered criteria are listed and the number asked for. With
no terminal, as when driving the CLI from a tool, the same list comes back as an error
instead, so re-run with the number. A substring matching more than one criterion is an
error listing the matches with their real numbers.
```bash
worklane check a1b2c3d4 2
worklane check a1b2c3d4 "renames the file"
worklane uncheck a1b2c3d4 2
```
### `worklane comment`
Add a comment to a ticket.
**Positional arguments:**
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
- `<body>`: Comment text
Comments are stored as timestamped markdown files in `.worklane/comments/<ticket-uuid>/` and include the git author and timestamp.
Examples:
```bash
worklane comment ticket-id "Reviewed, looks good"
worklane comment "My Ticket" "Needs changes to the UI"
worklane comment a1b2c3d4 "LGTM, approved"
```
## Working a ticket
Move the ticket as you work it, not afterwards. The board should say what is happening
now, not only what already landed.
1. `worklane show <id>` to read it
2. **`worklane mv <id> --status committed` before writing any code.** This is what marks
the ticket as being worked on, so it belongs at the start
3. Do the work. `worklane check <id> <n>` as each criterion is met
4. `worklane comment <id> <body>` with anything worth recording: a decision, a rejected
acceptance criterion, something the ticket got wrong
5. **`worklane mv <id> --status reviewing` once it is done and the tests pass**
Only one stage forward is allowed at a time, so a ticket left in `backlog` until the end
cannot go straight to `reviewing`. It has to be walked through `committed` anyway, which
makes moving it up front the same two commands in a more useful order.
## Commands
- `worklane add` creates tickets with all relevant details
- `worklane ls [status]` views tickets by status
- `worklane show <id>` views full ticket details
- `worklane mv <id> --status <target>` moves tickets through the workflow
- `worklane set <ticket>` corrects a field, `worklane append <ticket>` adds to a section
- `worklane check <ticket> <n>` ticks a criterion as it is met
- `worklane comment <ticket> <body>` adds notes to tickets