Compare commits

..
6 Commits
Author SHA1 Message Date
Ansho ReiandClaude Opus 5 c606b5ba43 (4edc7fa) Lay the tui card out as corners, with a due date and a criteria count, and bump to 0.8.5
A card was three left-aligned rows: mark and id, one row of title, then owner
and due as prose. The title got one row, so worklane's own titles, routinely
longer than a quarter of a terminal, were cut mid-word with nothing to say so.
The due sat at the end of the bottom row where nothing drew the eye to it, and
nothing showed how far along a ticket was.

    ●◐ (1b78a24)        2026-12-31
    The tui detail view cannot
    scroll, and the footer says…
    Ansho Rei                [3/9]

The title takes one row or two, wrapped on spaces, ellipsis when even two are
not enough, one row when one is enough. A card's height therefore depends on the
column's width, so `card_lines` and `card_height` take it, and `column_areas` is
now shared between the draw and `follow_selection`: `Ratio` hands its remainder
column to whichever slot it likes, and reproducing that arithmetic by hand is
how a measurement and a draw come to disagree about where a card starts.

A corner that will not fit is dropped whole rather than truncated or moved to a
row of its own. Half a date reads as a different date, and a card that reflows
in a narrow column changes height, which the scroll would then have to chase.
The left corner is the ticket's identity and always stays. Checked by eye at
120, 76 and 52 columns; at 52 the due goes and the count still fits.

The criteria count is a field on `TicketItem`, filled in `collect_ticket_items`
where the file is already being read, so a rescan pays for it once rather than
every draw re-reading every ticket body. Counted through `criteria()`, so a
checkbox in a description is neither counted here nor numbered by `show`, and
`None` rather than `[0/0]` when a ticket has none.

`due_date` cuts a due value back to its date only when it has one. The field is
not validated, see daa0e79, so it holds whatever was typed; taking the first
word regardless would turn "next friday" into "next". A set due is now the
timestamp colour per the colour guideline, which is what makes the corner worth
looking at, and an unset one stays grey like everywhere else.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 16:56:38 +02:00
Ansho ReiandClaude Opus 5 90b313952b (6d327df) Stop colour escapes leaking into the board's detail view, and bump to 0.8.4
The detail view renders with colour off, because ratatui draws styled spans and
an escape sequence inside a paragraph is not one. `detail_of` asks for that with
`content_trim(&content, false)`. Two paths ignored the argument and asked the
terminal instead.

`colorize_ordered` took no colour parameter at all and called `color_text`,
which is `paint(.., should_use_colors())`, and `content_trim` routes every
Implementation Plan line through it. In the TUI stdout is a terminal, so each
numbered step arrived as ESC[36m, the number, ESC[0m, then the text: exactly the
gap between the number and the step text where the reported artifact showed.
`colorize_line` did the same for a hand-written line inside a Metadata section,
and `colorize_bold` honoured its `enabled` flag on the early return and then
asked `should_use_colors()` again for the bold run, which made the flag a lie in
half the function.

`colorize_ordered` now takes the decision and is private, `content_trim` being
its only caller. `colorize_line` is deleted rather than given the argument: it
was a `pub` alias for `colorize_bold` with one caller, and asking the terminal
was the only thing it added, so `render_metadata_table` calls `colorize_bold`
with the decision it already holds.

Why this shipped, and the reason for the shape of the tests. The guard was an
assert that the detail view holds no escape byte, and it could not fail: a test
binary has no tty, so `should_use_colors()` was false and the leaking branch was
never taken. An absence is now asserted alongside a presence, `content_trim(..,
false)` carries no escape and `content_trim(.., true)` still colours, which pins
the flag as the only thing that decides. A third test scans this file for
`color_text` callers and fails on a new one; it also corrected the assumption
this commit started from, since the remaining caller is `ambiguous` and not
`display_ticket_items`.

The visible symptom is a terminal artifact that no test here can see, since
TestBackend applies cell updates and parses no escapes. What is proven is that
the escapes are gone, and that the CLI still paints its plan numbers cyan in a
pty, which is the condition the leak needed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 16:48:01 +02:00
Ansho ReiandClaude Opus 5 7240fc263b Record the overlay title decisions, and bump to 0.8.3
The bump for 0721739, which landed in the commit before this one. The board
section of AGENTS.md gains the two facts the next change to the modal needs:
the name travels beside the text in `Detail` rather than inside it, since
anything in the paragraph scrolls away and `content_trim` drops the heading on
purpose; and `detail_title` cuts the string itself because ratatui truncates a
block title at whatever cell it reaches and would take the id with it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 16:42:53 +02:00
Ansho ReiandClaude Opus 5 580e3cf7f0 (0721739) Show the ticket id and title on the detail overlay's border
The modal named nothing. It showed a description, criteria and a metadata table
belonging to a ticket whose title is nowhere in the text, because content_trim
drops the `# ` heading on purpose: `cmd_show` prints it. The card behind the
overlay carries it, but the overlay covers most of the board, and the seven
characters of id in the metadata table were the only thing identifying what was
open.

The id and the name now sit on the block title, `(1111111) · First one`. The id
goes first because that is how every other view addresses a ticket, and both sit
on the border rather than at the head of the paragraph, so reading to the end of
a long ticket cannot carry them off the screen.

The string is cut here rather than left to the renderer, which truncates an
overlong block title at whatever cell it reaches and would take the id with it.
Cut against the inner width, the id survives whole and the name ends in an
ellipsis where it was trimmed.

`Board::detail` is now a `Detail` carrying the title, the id and the text, since
the title has to travel beside the body rather than inside it.

Written in an opencode session, lost from the working tree to a `git checkout
src/tui.rs` that Claude ran to drop a scratch test, and recovered from the
opencode snapshot store. The diff is unchanged from what was written, bar one
rebase conflict where both sides had added a test helper in the same place.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 16:41:26 +02:00
Ansho ReiandClaude Opus 5 2298d3373a (8528c50) Hide the done column in the tui until d asks for it, and bump to 0.8.2
Done only grows. It already holds more tickets than the other three columns
together, so a quarter of the width was going to the column least often read
while the ones being worked got squeezed for it.

Not a new opinion: `ls` already counts done in its summary and leaves it out of
the listing below. The board now does the same, and the footer carries the
count while the column is hidden, which is the board's version of that summary
line. It reads `d show done (17)` while hidden and `d hide done` while shown,
so the count only appears where a column heading is not already carrying it.
The modal footer names the key too, since it works with a ticket open.

Hiding is a change to what is drawn, never to what is read. `reload` still
scans the done directory and `digest` still watches it, so the count is right
and revealing the column needs no rescan.

`visible()` returns a prefix of the columns rather than a filter, which is what
keeps `column` and `offsets` valid as indices into either. It is derived from
where DONE actually sits rather than assuming the last slot, and a test pins
done as last: a status inserted after it would otherwise hide two columns in
silence. DONE is now a constant, since `ls` and the board are two readers of
the same rule.

Hiding the column under the selection moves the selection to the last drawn
column and closes an open detail view. Refreshing the modal onto whichever
ticket the selection landed on was the alternative, and it swaps what someone
is reading without saying so, which is how a person acts on the wrong ticket.
Showing done again is a no-op for the selection, since a column is appended
rather than inserted.

Three existing tests asserted a column heading with `screen.contains("done
(0)")` over the whole render, and the new footer holds that string whether the
column is drawn or not, so all three passed for the wrong reason the moment
done was hidden. They now assert against the top border row through a
`headings()` helper, with `footer()` beside it.

The choice is not remembered between runs: worklane has no config file, and one
flag is not a reason to start one.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 16:30:06 +02:00
Ansho ReiandClaude Opus 5 8013c2b74d (d8e78cd) Clear the clippy warnings, and bump to 0.8.1
`cargo clippy --all-targets` was reporting 96 warnings, 14 of them in the
binary. It is now clean from a cold cache, and the 211 tests still pass.

`clippy --fix` took the mechanical ones: needless borrows, `map_or` that is
`is_some_and`, `push_str` of a single character, manual `split_once`, and
`&PathBuf` parameters in the test fixtures. It also moved the `handlers.rs`
test module to the end of the file, which is what `items_after_test_module`
was pointing at.

Three by hand. `cmd_add` took nine parameters threaded from `main`, and now
takes `AddArgs`, which is how `set`, `append` and `check` already pass theirs;
the handler destructures it so the body reads as before, and `add --help` is
unchanged. The collapsed `if` in `content_trim` needed reindenting, since
`--fix` left its body at the old depth. And the two `split_once` rewrites read
as `.split_once(..).map(|(_, value)| value)` rather than clippy's `.map(|x|
x.1)`.

The two eight-argument `create_ticket` test fixtures keep an
`allow(too_many_arguments)` carrying the reason: the lint is right that
twenty-five positional call sites read as a wall of strings, but replacing them
with a named-field struct is a refactor and not a warning sweep. a34a316 tracks
it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 15:37:11 +02:00
17 changed files with 1272 additions and 309 deletions
+20 -1
View File
@@ -34,6 +34,7 @@ and this file is for what someone changing worklane's own code needs.
- Tests use `assert_cmd` and `assert_fs` for CLI testing
- `setup_worklane()` creates temp `.worklane/` with all four status folders pre-created
- `create_ticket()` writes fully-formed markdown files directly (no `--` separator for positional args in test commands)
- **`cargo clippy --all-targets` is clean. Keep it clean**, and do not silence a lint that is pointing at something real. The only two `allow`s in the tree sit on the `create_ticket` fixtures in `cmd_mv.rs` and `cmd_show.rs`, each carrying the reason and what would replace it
## Coding Guidelines
@@ -43,6 +44,7 @@ and this file is for what someone changing worklane's own code needs.
- Prefer explicit `match` over `unwrap_or_default()` for clarity
- Use `unwrap_or_else(|| expr)` for lazy defaults, `unwrap_or(val)` for eager defaults
- Use `anyhow!()` with context strings that include identifying info (e.g. UUID, title) not bare values
- A command whose arguments run past a handful takes a clap `Args` struct, not an inline variant with a matching parameter list: `AddArgs`, `SetArgs`, `AppendArgs`, `CheckArgs`. `add` was nine positional parameters threaded from `main` before it became `AddArgs`, and the handler destructures the struct so the body reads the same as before
### CLI Arguments
- The prose arguments carry `allow_hyphen_values`, via the `PROSE` constant in `command.rs`: `add --title`, `--description`, `--acceptance`, `--plan`, and the `comment` body. Ticket text quotes flag names constantly, and without it a criterion reading `--print is supported` is parsed as a flag and the whole ticket is refused with nothing written
@@ -92,8 +94,22 @@ and this file is for what someone changing worklane's own code needs.
- The draw aligns the focused column again on its own geometry, so a resize between keypress and frame cannot hide the selection, and caps every column against blank space past its last card. The stored value may go stale after a tick shrinks the column; that is fine, because what is drawn is corrected immediately and the next navigation writes the correction back
- Entering another column follows the selection rather than resetting to its top. The card index carries across columns, so a reset would open the column with the highlight below the fold whenever it was — the opposite of the detail view's reset-on-selection-move, where each ticket genuinely starts at its own top. The index is shared and clamps permanently when a shorter column pulls it down, so a column you return to follows the selection to where it now sits rather than holding your old place
- **The footer names only keys that work.** It read `↑↓ scroll` when nothing scrolled at all, which sends the reader looking for their own mistake. A UI that misdescribes itself is worse than one that is merely incomplete
- **The overlay names its ticket on the border, not at the head of the paragraph.** `Board::detail` is a `Detail` carrying the title, the id and the text, because the name has to travel beside the body rather than inside it: `content_trim` drops the `# ` heading on purpose, since `cmd_show` prints it, and anything in the paragraph scrolls away
- `detail_title` cuts the string itself instead of leaving it to ratatui, which truncates an overlong block title at whatever cell it reaches and would take the id with it. Cut against the inner width, so the id survives whole and the name ends in an ellipsis. The id goes first because that is how every other view addresses a ticket
- The detail view renders with colour off. ratatui draws styled spans, so an escape sequence in a paragraph would be printed as literal bytes. `content_trim` and `format_comments_with` take the colour decision for that reason
- Read only. Moving a card by keypress is a follow-up, deliberately kept out until the watch and render loop were solid
- **A card is four corners with the title between them:** mark and short id top left, due top right, owner bottom left, criteria count bottom right. The two numbers are in corners because that is where the eye goes for one, and both were invisible at the end of a line of prose
- The title takes one row or two, wrapped on spaces, with an ellipsis when even two are not enough. One row when one is enough: a second, blank row on every short ticket spends the column's height on nothing
- **A card's height therefore depends on the column's width**, so `card_lines` and `card_height` both take it. `column_areas` is shared between the draw and `follow_selection` for the same reason: `Ratio` hands the remainder column to whichever slot it likes, and reproducing that arithmetic by hand is how the measurement and the draw come to disagree about where a card starts
- **A corner that will not fit is dropped whole**, never truncated or wrapped: half a date reads as a different date, and a card that reflows in a narrow column changes height, which the scroll would then have to chase. The left corner is the ticket's identity and always stays
- The criteria count is a field on `TicketItem`, filled in `collect_ticket_items` where the file is already being read, and counted through `criteria()` so a checkbox in a description is not counted here or numbered by `show`. Do not count per card: that re-reads every ticket body on every draw instead of on the tick that changed something. `None` rather than `[0/0]` for a ticket with no criteria
- `due_date` cuts a due value back to its date only when it has one. The field is not validated (daa0e79), so it can hold a time or free text, and taking the first word regardless would turn "next friday" into "next"
- **Done is hidden until `d` asks for it.** Not a new opinion: `ls` already counts done in its summary and leaves it out of the listing. Done only grows, so a quarter of the width was going to the column least often read. The footer carries its count while it is hidden, which is the board's version of that summary line
- **Hiding is a change to what is drawn, never to what is read.** `reload` still scans the done directory and `digest` still watches it, so the footer count is right and revealing the column needs no rescan. Do not "optimise" that into a conditional scan
- `visible()` returns a prefix of `columns`, not a filter, which is what keeps `column` and `offsets` valid as indices into either. It is derived from where `DONE` actually sits rather than assuming the last slot, and `the_done_column_is_last` pins the assumption. A status inserted after done would otherwise hide two columns in silence
- Hiding the column under the selection moves the selection to the last drawn column and **closes an open detail view**. The alternative, refreshing the modal onto whichever ticket the selection landed on, swaps what someone is reading without saying so, which is how a person acts on the wrong ticket. Showing done again is a no-op for the selection, since a column is appended rather than inserted
- The choice is not remembered between runs. worklane has no config file and one flag is not a reason to start one; if it should persist, that is its own ticket
- **Assert a column heading against the top border row, not the whole screen.** The footer names done too, so `screen.contains("done (0)")` passes on the footer whether the column is drawn or not. Three tests went vacuous that way the moment done was hidden; `headings()` and `footer()` exist so the next one does not
### Shipping the Agent Assets
- The skill is embedded with `include_str!` from `assets/SKILL.md`, not copied by an install script. `cargo install` places binaries and nothing else, so an installed document that is not in the binary is a document that drifts from it
@@ -107,6 +123,9 @@ and this file is for what someone changing worklane's own code needs.
### Color and Output
- Use `color_text()` for coloured output — it respects `should_use_colors()` (terminal detection), and `paint()` is the same with the decision passed in
- **`color_text()` is for the CLI's own printing only. Anything reachable from `content_trim` takes the decision as an argument and calls `paint()`**, because the board renders with colour off and an escape sequence in a ratatui paragraph is drawn as literal bytes. `nothing_the_body_renders_asks_the_terminal_for_the_colour_decision` scans this file and fails on a new caller; the allowlist is `ambiguous`, which builds a failed-search message for stderr
- A function that takes an `enabled` flag must use it all the way down. `colorize_bold` honoured its flag on the early return and then asked `should_use_colors()` for the bold run, which made the flag a lie in half the function
- **A test that asserts an absence has to be paired with one that asserts the presence.** The guard for this, an assert that the detail view holds no escape byte, could not fail: a test binary has no tty, so `should_use_colors()` was false and the leaking branch was never taken. The pair is now `content_trim(.., false)` has no escape and `content_trim(.., true)` still colours, which pins the flag as the only thing that decides
- **The palette is the `Color` enum, not a string.** `Color::ansi()` gives the CLI its SGR sequence and `From<Color> for ratatui::style::Color` gives the TUI its equivalent, so a colour that exists for one renderer and not the other is a compile error. The stringly-typed version needed a test for exactly that, and a missing entry silently produced an empty prefix, which is how `magenta` came to be undefined
- Reset color with `\x1b[0m` after colored text
- Bold uses `\x1b[1;35m` (magenta bold)
@@ -123,7 +142,7 @@ and this file is for what someone changing worklane's own code needs.
- Grey is indexed colour 8 in the 256-colour form, not SGR 90 or 37. Both of those failed on a real palette: 90 leans on the bright-black slot and 37 can sit on top of the default foreground. `\x1b[38;5;8m` is byte for byte what crossterm emits for ratatui's `Color::DarkGray`, the grey frig and pantop use for dimmed rows
### Code Organization
- Colorization functions (`colorize_line`, `colorize_ordered`, `content_trim_colored`) handle markdown formatting
- Colorization functions (`colorize_ordered`, `colorize_bold`, `content_trim_colored`) handle markdown formatting. `colorize_line` is gone: it was a `pub` alias for `colorize_bold` with one caller, and the only thing it added was asking the terminal
- `show` renders the Metadata section as a two column table via `render_metadata_table`, not line by line. Column width is measured on the raw field names in characters and padding is applied before anything is styled: measuring a coloured string counts its escapes towards its width. `paint()` is `color_text()` with the colour decision passed in, which is what lets a test render both ways in one process
- The title is printed once, by `cmd_show`. `content_trim_colored` skips the `# ` heading in the file content
- Rules under headings are measured on the displayed name in characters, never on the raw line or in bytes
Generated
+1 -1
View File
@@ -1494,7 +1494,7 @@ dependencies = [
[[package]]
name = "worklane"
version = "0.8.0"
version = "0.8.5"
dependencies = [
"anyhow",
"assert_cmd",
+1 -1
View File
@@ -1,6 +1,6 @@
[package]
name = "worklane"
version = "0.8.0"
version = "0.8.5"
edition = "2024"
[dependencies]
+1 -1
View File
@@ -5,7 +5,7 @@ Worklane is a local Kanban flow for agentic software development.
## Commands
| Command | Description |
|---------|-------------|
| `worklane` or `worklane tui` | Opens the board: four status columns, redrawn when the tree changes. Read only. Arrows or `hjkl` to move, `enter` for detail, `pgup`/`pgdn` to scroll an open ticket, `q` to quit |
| `worklane` or `worklane tui` | Opens the board: four status columns, redrawn when the tree changes. Read only. Opens on backlog, committed and reviewing; `d` shows or hides done, whose count stays in the footer either way. Arrows or `hjkl` to move, `enter` for detail, `pgup`/`pgdn` to scroll an open ticket, `q` to quit |
| `worklane init` | Creates `.worklane/` with backlog, committed, reviewing, done directories |
| `worklane add` | Creates a ticket in backlog with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--owner`, `--priority` flags |
| `worklane ls [status]` | Lists tickets, sorted by priority then title. Optional positional status, and `--priority <1-5>` |
+42 -33
View File
@@ -70,39 +70,7 @@ pub enum Command {
Init,
/// Add a new ticket to the backlog
Add {
/// Ticket title
#[arg(short, long, allow_hyphen_values = PROSE)]
title: String,
/// Ticket description. Use multiple flags to create multiline descriptions.
#[arg(short, long, allow_hyphen_values = PROSE)]
description: Vec<String>,
/// Acceptance criteria. Accepts multiple flags, each will be interpreted as a single criterium
#[arg(short, long, allow_hyphen_values = PROSE)]
acceptance: Vec<String>,
/// Implementation plan. Accepts multiple flags, each will be interpreted as a single step
#[arg(short, long, allow_hyphen_values = PROSE)]
plan: Vec<String>,
/// Tags (comma-separated)
#[arg(short = 'g', long)]
tags: Vec<String>,
/// Due date (YYYY-MM-DD)
#[arg(long)]
due: Option<String>,
/// Owner
#[arg(short, long)]
owner: Option<String>,
/// Priority, 1 (most urgent) to 5 (least). Left unset if omitted.
#[arg(long, value_parser = priority_level)]
priority: Option<u8>,
},
Add(AddArgs),
/// List tickets, optionally filtered by status
#[command(after_help = PRIORITY_LEGEND.as_str())]
@@ -176,6 +144,47 @@ pub enum Command {
},
}
/// `add` carries every field a new ticket can hold, so it is a struct rather than an
/// inline variant: nine parameters at the call site is what `too_many_arguments` is
/// for, and `set`, `append` and `check` already pass their arguments this way.
///
/// No `ArgGroup`: `--title` is required on its own, and everything else is optional
/// because a ticket with only a title is a valid thing to file.
#[derive(clap::Args)]
pub struct AddArgs {
/// Ticket title
#[arg(short, long, allow_hyphen_values = PROSE)]
pub title: String,
/// Ticket description. Use multiple flags to create multiline descriptions.
#[arg(short, long, allow_hyphen_values = PROSE)]
pub description: Vec<String>,
/// Acceptance criteria. Accepts multiple flags, each will be interpreted as a single criterium
#[arg(short, long, allow_hyphen_values = PROSE)]
pub acceptance: Vec<String>,
/// Implementation plan. Accepts multiple flags, each will be interpreted as a single step
#[arg(short, long, allow_hyphen_values = PROSE)]
pub plan: Vec<String>,
/// Tags (comma-separated)
#[arg(short = 'g', long)]
pub tags: Vec<String>,
/// Due date (YYYY-MM-DD)
#[arg(long)]
pub due: Option<String>,
/// Owner
#[arg(short, long)]
pub owner: Option<String>,
/// Priority, 1 (most urgent) to 5 (least). Left unset if omitted.
#[arg(long, value_parser = priority_level)]
pub priority: Option<u8>,
}
/// `set` replaces a field outright. Owner is deliberately absent: `chown` owns that
/// field, and status is `mv`'s, so no field has two writers.
///
+54 -51
View File
@@ -4,7 +4,7 @@ use std::fs;
use std::io::{BufRead, IsTerminal, Write};
use std::path::Path;
use crate::command::{AppendArgs, CheckArgs, SetArgs};
use crate::command::{AddArgs, AppendArgs, CheckArgs, SetArgs};
use crate::install;
use crate::util::*;
@@ -71,7 +71,7 @@ pub fn cmd_ls(
// Show all tickets except done grouped by status
for status in &statuses {
if *status == "done" {
if *status == DONE {
continue;
}
let status_path = worklane_dir.join(status);
@@ -105,17 +105,18 @@ fn filter_by_priority(items: Vec<TicketItem>, level: Option<u8>) -> Vec<TicketIt
}
}
pub fn cmd_add(
title: &str,
description: &[String],
acceptance: &[String],
plan: &[String],
tags: &[String],
due: &Option<String>,
owner: &Option<String>,
priority: Option<u8>,
start: &Path,
) -> Result<()> {
pub fn cmd_add(args: &AddArgs, start: &Path) -> Result<()> {
let AddArgs {
title,
description,
acceptance,
plan,
tags,
due,
owner,
priority,
} = args;
let owner = match owner {
Some(o) => Some(o.clone()),
None => get_git_user(),
@@ -222,7 +223,7 @@ pub fn read_comments(comments_dir: &Path) -> Result<Vec<(String, String, String,
for entry in fs::read_dir(comments_dir)? {
let entry = entry?;
let path = entry.path();
if path.extension().map_or(false, |e| e == "md") {
if path.extension().is_some_and(|e| e == "md") {
let content = fs::read_to_string(&path)?;
let filename = path
.file_stem()
@@ -232,14 +233,16 @@ pub fn read_comments(comments_dir: &Path) -> Result<Vec<(String, String, String,
let author = content
.lines()
.find(|l| l.starts_with("**Author**"))
.and_then(|l| l.splitn(2, "**Author**:").nth(1))
.and_then(|l| l.split_once("**Author**:"))
.map(|(_, value)| value)
.map(|s| s.trim().to_string())
.unwrap_or_else(|| "unknown".to_string());
let time = content
.lines()
.find(|l| l.starts_with("**Time**"))
.and_then(|l| l.splitn(2, "**Time**:").nth(1))
.and_then(|l| l.split_once("**Time**:"))
.map(|(_, value)| value)
.map(|s| s.trim().to_string())
.unwrap_or_else(|| "unknown".to_string());
@@ -372,7 +375,7 @@ fn find_ticket_file(dir: &Path, uuid: &str, title: &str) -> Result<String> {
for entry in fs::read_dir(dir)? {
let entry = entry?;
let path = entry.path();
if !path.extension().map_or(false, |e| e == "md") {
if !path.extension().is_some_and(|e| e == "md") {
continue;
}
@@ -472,7 +475,7 @@ pub fn cmd_mv(ticket_id: &str, target_status: &str, force: bool, start: &Path) -
if current_status == target_status {
println!(
"Ticket is already in '{}' status.",
color_text(&target_status, Color::Orange)
color_text(target_status, Color::Orange)
);
return Ok(());
}
@@ -506,39 +509,6 @@ pub fn cmd_mv(ticket_id: &str, target_status: &str, force: bool, start: &Path) -
Ok(())
}
#[cfg(test)]
mod tests {
use super::*;
/// The collision path cannot be provoked from the CLI, since two processes
/// will not share a microsecond, but it is the whole point of the guard.
#[test]
fn a_colliding_stem_takes_the_next_name_and_keeps_the_first() {
let dir = std::env::temp_dir().join(format!("worklane-test-{}", uuid::Uuid::new_v4()));
fs::create_dir_all(&dir).unwrap();
let first = write_new_comment(&dir, "20260820_143012_123456", "first").unwrap();
let second = write_new_comment(&dir, "20260820_143012_123456", "second").unwrap();
let third = write_new_comment(&dir, "20260820_143012_123456", "third").unwrap();
assert_eq!(first, "20260820_143012_123456.md");
assert_eq!(second, "20260820_143012_123456_01.md");
assert_eq!(third, "20260820_143012_123456_02.md");
// Nothing was truncated on the way through
assert_eq!(fs::read_to_string(dir.join(&first)).unwrap(), "first");
assert_eq!(fs::read_to_string(dir.join(&second)).unwrap(), "second");
assert_eq!(fs::read_to_string(dir.join(&third)).unwrap(), "third");
// read_comments sorts on the stem, so the names must sort in write order
let mut names = vec![second.clone(), third.clone(), first.clone()];
names.sort();
assert_eq!(names, vec![first, second, third]);
fs::remove_dir_all(&dir).unwrap();
}
}
pub fn cmd_comment(
ticket_id: &str,
body: &str,
@@ -899,3 +869,36 @@ pub fn cmd_install_skill(force: bool, print: bool) -> Result<()> {
Ok(())
}
#[cfg(test)]
mod tests {
use super::*;
/// The collision path cannot be provoked from the CLI, since two processes
/// will not share a microsecond, but it is the whole point of the guard.
#[test]
fn a_colliding_stem_takes_the_next_name_and_keeps_the_first() {
let dir = std::env::temp_dir().join(format!("worklane-test-{}", uuid::Uuid::new_v4()));
fs::create_dir_all(&dir).unwrap();
let first = write_new_comment(&dir, "20260820_143012_123456", "first").unwrap();
let second = write_new_comment(&dir, "20260820_143012_123456", "second").unwrap();
let third = write_new_comment(&dir, "20260820_143012_123456", "third").unwrap();
assert_eq!(first, "20260820_143012_123456.md");
assert_eq!(second, "20260820_143012_123456_01.md");
assert_eq!(third, "20260820_143012_123456_02.md");
// Nothing was truncated on the way through
assert_eq!(fs::read_to_string(dir.join(&first)).unwrap(), "first");
assert_eq!(fs::read_to_string(dir.join(&second)).unwrap(), "second");
assert_eq!(fs::read_to_string(dir.join(&third)).unwrap(), "third");
// read_comments sorts on the stem, so the names must sort in write order
let mut names = vec![second.clone(), third.clone(), first.clone()];
names.sort();
assert_eq!(names, vec![first, second, third]);
fs::remove_dir_all(&dir).unwrap();
}
}
+3 -20
View File
@@ -41,26 +41,7 @@ fn main() -> Result<()> {
// No subcommand opens the board, the way a bare `frig` does.
None | Some(Command::Tui) => run_tui(&start),
Some(Command::Init) => cmd_init(&start),
Some(Command::Add {
title,
description,
acceptance,
plan,
tags,
due,
owner,
priority,
}) => cmd_add(
&title,
&description,
&acceptance,
&plan,
&tags,
&due,
&owner,
priority,
&start,
),
Some(Command::Add(args)) => cmd_add(&args, &start),
Some(Command::Ls { status, priority }) => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_ls(&status, priority, &worklane_dir)
@@ -180,6 +161,8 @@ fn run_tui(start: &std::path::Path) -> Result<()> {
KeyCode::Down | KeyCode::Char('j') => board.select_card(1, screen),
KeyCode::PageUp => board.scroll_detail(-1, screen),
KeyCode::PageDown => board.scroll_detail(1, screen),
// Free of the other bindings, and the footer names it in both states.
KeyCode::Char('d') => board.toggle_done(screen),
_ => {}
}
}
+820 -76
View File
File diff suppressed because it is too large Load Diff
+225 -28
View File
@@ -189,7 +189,7 @@ pub fn slug(title: &str) -> String {
pub fn get_git_user() -> Option<String> {
std::process::Command::new("git")
.args(&["config", "user.name"])
.args(["config", "user.name"])
.output()
.ok()
.and_then(|out| {
@@ -256,7 +256,7 @@ pub fn resolve_ticket(search: &str, worklane_dir: &Path) -> Result<(String, Stri
let entries = fs::read_dir(&status_path)?;
for entry in entries.filter_map(|e| e.ok()) {
let path = entry.path();
if !path.extension().map_or(false, |e| e == "md") {
if !path.extension().is_some_and(|e| e == "md") {
continue;
}
let content = match fs::read_to_string(&path) {
@@ -326,16 +326,16 @@ pub fn format_comments_with(
}
let mut result = String::new();
result.push_str("\n");
result.push('\n');
result.push_str(&paint("COMMENTS", Color::Orange, colored));
result.push_str(&format!("\n{}\n", "─".repeat(20)));
for (_filename, author, time, body) in comments {
result.push_str("\n");
result.push('\n');
result.push_str(&paint(&format!("From {} ({})", author, time), Color::Cyan, colored));
result.push_str("\n");
result.push('\n');
if !body.is_empty() {
result.push_str(&" ".to_string());
result.push_str(" ");
result.push_str(body);
}
result.push('\n');
@@ -403,7 +403,7 @@ pub fn content_trim(content: &str, colored: bool) -> String {
// Implementation Plan - color numbers in cyan
if current_section == "## Implementation Plan" {
result.push_str(&colorize_ordered(line));
result.push_str(&colorize_ordered(line, colored));
result.push('\n');
continue;
}
@@ -429,17 +429,19 @@ pub fn content_trim(content: &str, colored: bool) -> String {
}
// Standard markdown link colorization in cyan
if line.contains("[") && line.contains("(") && line.contains("]") {
if let Some(start) = line.find("[") {
let bracket_text = &line[start..];
if let Some(end_bracket) = bracket_text.find("](") {
let link_start = start + end_bracket + 1;
if let Some(end) = line[link_start..].find(']') {
let absolute_end = link_start + end + 1;
result.push_str(&paint(&line[start..absolute_end], Color::Cyan, colored));
result.push('\n');
continue;
}
if line.contains("[")
&& line.contains("(")
&& line.contains("]")
&& let Some(start) = line.find("[")
{
let bracket_text = &line[start..];
if let Some(end_bracket) = bracket_text.find("](") {
let link_start = start + end_bracket + 1;
if let Some(end) = line[link_start..].find(']') {
let absolute_end = link_start + end + 1;
result.push_str(&paint(&line[start..absolute_end], Color::Cyan, colored));
result.push('\n');
continue;
}
}
}
@@ -452,8 +454,14 @@ pub fn content_trim(content: &str, colored: bool) -> String {
result
}
pub fn colorize_ordered(line: &str) -> String {
if line.chars().next().map_or(true, |c| !c.is_ascii_digit()) {
/// Colour the `1.` at the head of a numbered line, leaving the rest alone.
///
/// Takes the decision rather than asking for it. Asking is what put `\x1b[36m` and
/// `\x1b[0m` around every Implementation Plan number in the board's detail view,
/// which renders with colour off precisely because a paragraph is not a place an
/// escape sequence can go.
fn colorize_ordered(line: &str, colored: bool) -> String {
if line.chars().next().is_none_or(|c| !c.is_ascii_digit()) {
return line.to_string();
}
@@ -466,7 +474,7 @@ pub fn colorize_ordered(line: &str) -> String {
// still scanning digits
} else if *c == '.' && i + 1 < chars.len() && chars[i + 1] == ' ' {
let number = &line[..i + 1];
result.push_str(&color_text(number, Color::Cyan));
result.push_str(&paint(number, Color::Cyan, colored));
result.push_str(&line[i + 1..]);
return result;
} else {
@@ -556,7 +564,10 @@ fn render_metadata_table(lines: &[&str], colored: bool) -> String {
result.push_str(METADATA_GUTTER);
result.push_str(&metadata_value_cell(name, value, colored));
}
MetadataRow::Other(text) => result.push_str(&colorize_line(text)),
// The decision this row is rendered under, not the one the terminal
// would give: `colorize_line` asked `should_use_colors()` here, which is
// how escapes reached the board's detail view.
MetadataRow::Other(text) => result.push_str(&colorize_bold(text, colored)),
}
result.push('\n');
}
@@ -569,10 +580,6 @@ pub fn is_unknown_value(value: &str) -> bool {
trimmed == "_None_" || trimmed == "_Not set_" || trimmed == "-None-" || trimmed == "-Not set-"
}
pub fn colorize_line(line: &str) -> String {
colorize_bold(line, should_use_colors())
}
/// Replace `**bold**` with colour, or leave the line exactly as it is.
///
/// Taking `enabled` rather than asking makes both paths testable, and the
@@ -598,7 +605,9 @@ fn colorize_bold(line: &str, enabled: bool) -> String {
match (i + 2..chars.len()).find(|&at| is_delimiter(&chars, at)) {
Some(close) => {
let bold: String = chars[i + 2..close].iter().collect();
result.push_str(&color_text(&bold, Color::Magenta));
// `enabled`, not `should_use_colors()`. Asking again here made the
// flag a lie: the early return above respected it and this did not.
result.push_str(&paint(&bold, Color::Magenta, enabled));
i = close + 2;
}
// Unterminated: the rest is literal. The old scan walked off the end
@@ -1093,9 +1102,18 @@ pub fn trim_blank_ends(values: &[String]) -> &[String] {
}
pub fn status_dirs() -> Vec<&'static str> {
vec!["backlog", "committed", "reviewing", "done"]
vec!["backlog", "committed", "reviewing", DONE]
}
/// The end of the flow, and the one status both views treat differently: `ls` counts it
/// in the summary and leaves it out of the listing, and the board hides its column until
/// asked. Named because that rule now has two readers.
///
/// It is deliberately last in `status_dirs()`. The board leans on that: hiding done drops
/// the final column, so the other three keep their indices and the selection only has to
/// be handled when it is sitting on done itself.
pub const DONE: &str = "done";
/// Lowest and highest level a ticket can carry. 1 is the most urgent, which is
/// what the `p1` to `p3` tags this replaced already meant.
pub const PRIORITY_RANGE: std::ops::RangeInclusive<u8> = 1..=5;
@@ -1141,6 +1159,16 @@ pub fn parse_priority(content: &str) -> Priority {
priority_from_value(&parse_ticket_field(content, "Priority"))
}
/// How far along a ticket is: criteria ticked against criteria written.
///
/// `total` is never zero. A ticket with no criteria has no progress to show, and a card
/// reading `[0/0]` says less than a card saying nothing, so the absence is `None`.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub struct Progress {
pub met: usize,
pub total: usize,
}
pub struct TicketItem {
pub title: String,
pub owner: String,
@@ -1148,11 +1176,42 @@ pub struct TicketItem {
pub id: String,
pub created: String,
pub priority: Priority,
/// Ticked against total, or `None` for a ticket with no criteria.
///
/// Counted where the file is already being read, so the board pays nothing for it
/// beyond the count itself: the alternative, counting per card, would re-read every
/// ticket body on every draw rather than on the tick that changed something. The
/// listing ignores it, as it ignores `path`.
pub criteria: Option<Progress>,
/// The file this came from. The listing ignores it; the TUI opens it for the
/// detail view rather than resolving the ticket a second time.
pub path: std::path::PathBuf,
}
/// The date part of a due value, for a view with only a corner to spend on it.
///
/// The field is not validated, see daa0e79, so it holds whatever a caller typed: a bare
/// date, a date and a time, or free text. Only a real `YYYY-MM-DD` prefix is cut back
/// to. Taking the first word regardless would turn a free-text due into its first word,
/// which is worse than showing what is stored and letting the column decide.
pub fn due_date(due: &str) -> &str {
let candidate = due.split([' ', 'T']).next().unwrap_or(due);
match is_ymd(candidate) {
true => candidate,
false => due,
}
}
fn is_ymd(value: &str) -> bool {
let bytes = value.as_bytes();
bytes.len() == 10
&& bytes[4] == b'-'
&& bytes[7] == b'-'
&& [0, 1, 2, 3, 5, 6, 8, 9]
.iter()
.all(|at| bytes[*at].is_ascii_digit())
}
/// Grey for a value that is not set, per the colour guideline.
///
/// `show` already did this in its metadata rendering, so the listing was the one
@@ -1254,6 +1313,18 @@ pub fn collect_ticket_items(status_path: impl AsRef<Path>) -> Result<Vec<TicketI
let filename = e.path().file_stem()?.to_string_lossy().to_string();
let created_at = parse_ticket_field(&content, "Created At");
// Through `criteria()`, so the card and the numbers `show` prints cannot
// disagree: a checkbox written into a description is not a criterion there
// and is not counted here.
let counted = criteria(&content);
let progress = match counted.len() {
0 => None,
total => Some(Progress {
met: counted.iter().filter(|criterion| criterion.checked).count(),
total,
}),
};
Some(TicketItem {
title,
owner,
@@ -1261,6 +1332,7 @@ pub fn collect_ticket_items(status_path: impl AsRef<Path>) -> Result<Vec<TicketI
id: short_id(&filename).to_string(),
created: format_created_at(&created_at),
priority: parse_priority(&content),
criteria: progress,
path: e.path(),
})
})
@@ -1541,6 +1613,131 @@ mod tests {
assert_eq!(rendered, format!("Priority {glyph} _Not set_\n"));
}
/// A ticket with the two things that used to leak: a numbered plan, and a
/// hand-written line inside the Metadata section.
const BOTH_LEAKS: &str = "# T\n\n## Implementation Plan\n1. First step\n2. Second step\n\
\n## Metadata\n\n- **ID**: abc\nA **handwritten** note\n";
/// The bug: the board asks for `content_trim(content, false)` because a paragraph
/// is no place for an escape sequence, and two paths asked the terminal instead.
#[test]
fn the_body_carries_no_escape_when_the_colour_is_off() {
let rendered = content_trim(BOTH_LEAKS, false);
assert!(
!rendered.contains('\x1b'),
"an escape survived colour being off: {rendered:?}"
);
// And the content is all still there, in plain form.
assert!(rendered.contains("1. First step"), "{rendered:?}");
assert!(rendered.contains("**handwritten**"), "{rendered:?}");
}
/// The other half of the pair, and the one that makes the first mean something:
/// with the flag on, both paths still colour. Without this, the passing test above
/// could be a colouring path that was simply deleted.
#[test]
fn the_body_colours_the_plan_number_and_a_metadata_note_when_the_colour_is_on() {
let rendered = content_trim(BOTH_LEAKS, true);
assert!(
rendered.contains(&format!("{}1.", Color::Cyan.ansi())),
"the plan number lost its colour: {rendered:?}"
);
assert!(
rendered.contains(&format!("{}handwritten", Color::Magenta.ansi())),
"the bold run lost its colour: {rendered:?}"
);
}
/// The flag has to be the only thing that decides, or the disabled path is just
/// the terminal's answer in disguise — which is why the leak survived a test
/// asserting the detail view holds no escapes. In a test binary there is no tty,
/// so `should_use_colors()` is false and the leaking branch was never taken.
#[test]
fn nothing_the_body_renders_asks_the_terminal_for_the_colour_decision() {
let callers = callers_of_color_text(include_str!("util.rs"));
// `ambiguous` is the one that may: it builds the candidate list for a failed
// search, reaches the user on stderr, and is not reachable from `content_trim`.
assert_eq!(
callers,
vec!["ambiguous".to_string()],
"`color_text` asks `should_use_colors()`. Everything reachable from \
`content_trim` has to take the decision as an argument and pass it to \
`paint` instead, because the board renders with colour off and an escape \
in a ratatui paragraph is drawn as literal bytes. If the new caller really \
is CLI-only, add it here and say why."
);
}
/// Which functions in this file call `color_text`, by name, definitions and the
/// test module excluded.
fn callers_of_color_text(source: &str) -> Vec<String> {
let body = match source.find("\n#[cfg(test)]") {
Some(end) => &source[..end],
None => source,
};
let mut current = String::new();
let mut callers = Vec::new();
for line in body.lines() {
if let Some(rest) = line.strip_prefix("fn ").or_else(|| line.strip_prefix("pub fn ")) {
current = rest.split('(').next().unwrap_or_default().to_string();
continue;
}
if line.contains("color_text(") && !callers.contains(&current) {
callers.push(current.clone());
}
}
callers
}
/// The field is not validated, see daa0e79, so the card cannot trust it to be a
/// bare date. Only a real date prefix is cut back to: free text is left alone,
/// since turning "next friday" into "next" would be a worse answer than the width.
#[test]
fn a_due_value_is_cut_back_to_its_date_only_when_it_has_one() {
assert_eq!(due_date("2026-12-31"), "2026-12-31");
assert_eq!(due_date("2026-12-31 09:30:00"), "2026-12-31");
assert_eq!(due_date("2026-12-31T09:30:00Z"), "2026-12-31");
assert_eq!(due_date("_Not set_"), "_Not set_");
assert_eq!(due_date("next friday"), "next friday");
assert_eq!(due_date("2026-1-1 09:30"), "2026-1-1 09:30");
}
/// The count on a card comes from `criteria()`, the same function that numbers them
/// in `show`, so the two cannot disagree about what a criterion is.
#[test]
fn collect_ticket_items_counts_the_criteria_show_would_number() {
let dir = std::env::temp_dir().join(format!("worklane-count-{}", uuid::Uuid::new_v4()));
fs::create_dir_all(&dir).unwrap();
let write = |name: &str, body: &str| {
fs::write(
dir.join(format!("11111111-0000-4000-8000-00000000000{name}.md")),
format!("# T{name}\n\n{body}\n\n## Metadata\n\n- **Owner**: alice\n"),
)
.unwrap();
};
// A checkbox in the description is not a criterion, in either view.
write(
"1",
"## Description\n- [x] not a criterion\n\n## Acceptance Criteria\n- [x] One\n- [ ] Two",
);
write("2", "## Acceptance Criteria\n_No acceptance criteria provided._");
let items = collect_ticket_items(&dir).unwrap();
let counted: Vec<Option<Progress>> = items.iter().map(|item| item.criteria).collect();
assert!(counted.contains(&Some(Progress { met: 1, total: 2 })), "{counted:?}");
assert!(counted.contains(&None), "a ticket with no criteria got a count: {counted:?}");
fs::remove_dir_all(&dir).unwrap();
}
#[test]
fn a_section_rule_matches_the_width_of_its_name() {
let rendered = content_trim_colored("# T\n\n## Description\nbody\n");
+21 -21
View File
@@ -2,7 +2,7 @@ use assert_cmd::Command;
use assert_fs::fixture::{PathChild, PathCreateDir};
use assert_fs::TempDir;
use std::fs;
use std::path::PathBuf;
use std::path::{Path, PathBuf};
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
@@ -23,7 +23,7 @@ fn add_creates_ticket_in_backlog() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("add")
.args(["--title", "Test ticket"])
.assert()
@@ -46,7 +46,7 @@ fn add_formats_ticket_correctly() {
setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args([
"add",
"--title",
@@ -103,7 +103,7 @@ fn add_joins_multiple_descriptions() {
setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args([
"add",
"--title", "Multi desc ticket",
@@ -132,7 +132,7 @@ fn add_with_optional_fields_uses_defaults() {
setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Minimal ticket"])
.assert()
.success();
@@ -156,13 +156,13 @@ fn add_allows_duplicate_titles() {
setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Existing title"])
.assert()
.success();
let mut cmd2 = Command::cargo_bin(BIN_NAME).unwrap();
cmd2.current_dir(&temp.path())
cmd2.current_dir(temp.path())
.args(["add", "--title", "Existing title"])
.assert()
.success();
@@ -182,7 +182,7 @@ fn add_file_has_uuid_prefix() {
setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "UUID test"])
.assert()
.success();
@@ -207,7 +207,7 @@ fn add_writes_the_priority_field() {
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.current_dir(temp.path())
.args(["add", "--title", "Urgent thing", "--priority", "1"])
.assert()
.success();
@@ -227,7 +227,7 @@ fn add_leaves_priority_unset_when_omitted() {
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.current_dir(temp.path())
.args(["add", "--title", "Whenever"])
.assert()
.success();
@@ -250,7 +250,7 @@ fn add_rejects_a_level_outside_the_range() {
// read as a flag.
for bad in ["0", "6", "high", "-1"] {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Bad level", &format!("--priority={bad}")])
.assert()
.failure();
@@ -272,7 +272,7 @@ fn add_accepts_prose_values_that_begin_with_a_hyphen() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "-t is a flag name"])
.args(["--description", "-x does nothing"])
.args(["--acceptance", "--print should be supported"])
@@ -300,7 +300,7 @@ fn add_still_accepts_the_equals_form() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title=-x equals form"])
.args(["--acceptance=--print via equals"])
.assert()
@@ -322,7 +322,7 @@ fn add_stores_a_title_that_is_only_hyphens() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", bare])
.assert()
.success();
@@ -344,7 +344,7 @@ fn add_still_rejects_a_mistyped_flag_on_a_non_prose_argument() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Mistyped", flag, "--bogus"])
.assert()
.failure();
@@ -363,7 +363,7 @@ fn add_rejects_arguments_after_a_bare_separator() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Sep", "--", "--title", "second"])
.assert()
.failure();
@@ -372,7 +372,7 @@ fn add_rejects_arguments_after_a_bare_separator() {
assert_eq!(count, 0);
}
fn only_ticket(worklane: &PathBuf) -> String {
fn only_ticket(worklane: &Path) -> String {
let files: Vec<_> = fs::read_dir(worklane.join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
@@ -390,7 +390,7 @@ fn add_keeps_a_paragraph_break_in_the_description() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Two Paras"])
.args(["--description", "First paragraph."])
.args(["--description", ""])
@@ -406,7 +406,7 @@ fn add_keeps_a_paragraph_break_in_the_description() {
// And it survives the round trip back out
let mut show = Command::cargo_bin(BIN_NAME).unwrap();
show.current_dir(&temp.path()).args(["show", "Two Paras"]);
show.current_dir(temp.path()).args(["show", "Two Paras"]);
let stdout = String::from_utf8(show.assert().success().get_output().stdout.clone()).unwrap();
assert!(
stdout.contains("First paragraph.\n\nSecond paragraph."),
@@ -421,7 +421,7 @@ fn add_discards_blank_descriptions_at_either_end() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Padded"])
.args(["--description", ""])
.args(["--description", " "])
@@ -444,7 +444,7 @@ fn add_treats_an_all_blank_description_as_none() {
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["add", "--title", "Blank"])
.args(["--description", ""])
.args(["--description", " "])
+4 -4
View File
@@ -2,7 +2,7 @@ use assert_cmd::Command;
use assert_fs::TempDir;
use assert_fs::fixture::{PathChild, PathCreateDir};
use std::fs;
use std::path::PathBuf;
use std::path::{Path, PathBuf};
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
const UUID: &str = "475534a3-8a0d-45cb-9a97-39c251dd8e39";
@@ -20,7 +20,7 @@ fn setup_worklane(temp: &TempDir) -> PathBuf {
/// One criterion already ticked, one handwritten line inside the section, and a
/// checkbox in the description that must not be counted as a criterion.
fn create_ticket(worklane: &PathBuf) {
fn create_ticket(worklane: &Path) {
// Written without line continuations on purpose: a trailing `\` strips the next
// line's leading whitespace, so the indented line would arrive unindented and the
// test would prove nothing about preserving it.
@@ -55,11 +55,11 @@ fn create_ticket(worklane: &PathBuf) {
fn run(temp: &TempDir, args: &[&str]) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(args);
cmd.current_dir(temp.path()).args(args);
cmd.assert().get_output().clone()
}
fn ticket(worklane: &PathBuf) -> String {
fn ticket(worklane: &Path) -> String {
fs::read_to_string(worklane.join("backlog").join(format!("{}_check-me.md", UUID))).unwrap()
}
+16 -16
View File
@@ -2,7 +2,7 @@ use assert_cmd::Command;
use assert_fs::fixture::{PathChild, PathCreateDir};
use assert_fs::TempDir;
use std::fs;
use std::path::PathBuf;
use std::path::{Path, PathBuf};
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
@@ -18,7 +18,7 @@ fn setup_worklane(temp: &TempDir) -> PathBuf {
}
fn create_ticket(
worklane_dir: &PathBuf,
worklane_dir: &Path,
status: &str,
title: &str,
) -> String {
@@ -53,7 +53,7 @@ fn comment_creates_file_with_valid_ticket_uuid() {
let uuid = create_ticket(&worklane, "backlog", "Test Ticket");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("comment")
.args([&uuid, "This is a test comment"])
.assert()
@@ -78,7 +78,7 @@ fn comment_creates_file_with_valid_ticket_title() {
create_ticket(&worklane, "committed", "My Ticket");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("comment")
.args(["My Ticket", "Testing title lookup"])
.assert()
@@ -105,7 +105,7 @@ fn comment_includes_git_user_and_body() {
let uuid = create_ticket(&worklane, "backlog", "Comment Test");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("comment")
.args([&uuid, "My comment body"])
.assert()
@@ -129,7 +129,7 @@ fn comment_stored_in_timestamped_file() {
let uuid = create_ticket(&worklane, "done", "Timestamp Test");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("comment")
.args([&uuid, "Timestamp test"])
.assert()
@@ -156,7 +156,7 @@ fn comment_creates_comments_directory() {
assert!(!comments_dir.exists());
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("comment")
.args([&uuid, "Create dir test"])
.assert()
@@ -173,7 +173,7 @@ fn comment_uses_owner_flag_when_provided() {
let uuid = create_ticket(&worklane, "backlog", "Owner Test");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("comment")
.args([&uuid, "Test comment with owner"])
.arg("-o")
@@ -198,7 +198,7 @@ fn comment_falls_back_to_git_user_when_owner_omitted() {
let uuid = create_ticket(&worklane, "done", "Fallback Test");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("comment")
.args([&uuid, "Test comment fallback"])
.assert()
@@ -225,7 +225,7 @@ fn comments_added_back_to_back_are_both_kept() {
for body in ["first comment", "second comment", "third comment"] {
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.current_dir(temp.path())
.arg("comment")
.args([&uuid, body])
.assert()
@@ -241,7 +241,7 @@ fn comments_added_back_to_back_are_both_kept() {
// And show has to render them in the order they were added
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg(&uuid);
cmd.current_dir(temp.path()).arg("show").arg(&uuid);
let assert = cmd.assert().success();
let stdout = String::from_utf8(assert.get_output().stdout.clone()).unwrap();
@@ -261,7 +261,7 @@ fn comment_accepts_a_body_that_begins_with_a_hyphen() {
for body in ["--print is the flag I mean", "-f skips the check", "-"] {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["comment", &uuid, body])
.assert()
.success();
@@ -289,13 +289,13 @@ fn comment_needs_a_separator_for_a_hyphen_leading_ticket() {
let mut without = Command::cargo_bin(BIN_NAME).unwrap();
without
.current_dir(&temp.path())
.current_dir(temp.path())
.args(["comment", "-leading", "a body"])
.assert()
.failure();
let mut with = Command::cargo_bin(BIN_NAME).unwrap();
with.current_dir(&temp.path())
with.current_dir(temp.path())
.args(["comment", "--", "-leading", "a body"])
.assert()
.success();
@@ -315,7 +315,7 @@ fn a_bare_double_hyphen_body_needs_a_separator() {
let mut without = Command::cargo_bin(BIN_NAME).unwrap();
let assert = without
.current_dir(&temp.path())
.current_dir(temp.path())
.args(["comment", &uuid, "--"])
.assert()
.failure();
@@ -327,7 +327,7 @@ fn a_bare_double_hyphen_body_needs_a_separator() {
);
let mut with = Command::cargo_bin(BIN_NAME).unwrap();
with.current_dir(&temp.path())
with.current_dir(temp.path())
.args(["comment", &uuid, "--", "--"])
.assert()
.success();
+14 -14
View File
@@ -17,7 +17,7 @@ fn setup_worklane(temp: &TempDir) -> std::path::PathBuf {
}
fn create_ticket(
worklane_dir: &std::path::PathBuf,
worklane_dir: &std::path::Path,
status: &str,
title: &str,
owner: &str,
@@ -71,7 +71,7 @@ fn ls_without_status_shows_overview() {
create_ticket(&worklane, "done", "Feature D", "dave", "2026-09-01");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").assert().success();
cmd.current_dir(temp.path()).arg("ls").assert().success();
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("BACKLOG"));
@@ -94,7 +94,7 @@ fn ls_with_status_filters_tickets() {
create_ticket(&worklane, "reviewing", "Feature C", "charlie", "2026-08-01");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").args(["committed"]);
cmd.current_dir(temp.path()).arg("ls").args(["committed"]);
cmd.assert().success();
@@ -107,7 +107,7 @@ fn ls_with_invalid_status_fails() {
let temp = TempDir::new().unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("ls")
.args(["nonexistent"])
.assert()
@@ -124,7 +124,7 @@ fn ls_listed_tickets_sorted_alphabetically() {
create_ticket(&worklane, "backlog", "Mango", "charlie", "2026-08-01");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("ls")
.args(["backlog"])
.assert()
@@ -146,7 +146,7 @@ fn ls_empty_status_shows_message() {
// Intentionally leave "done" empty
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("ls")
.args(["done"])
.assert()
@@ -164,7 +164,7 @@ fn ls_displays_owner_and_due() {
create_ticket(&worklane, "backlog", "Test ticket", "alice", "2026-12-31");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("ls")
.args(["backlog"])
.assert()
@@ -191,7 +191,7 @@ fn ls_handles_short_and_non_ascii_filenames() {
}
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog").assert().success();
cmd.current_dir(temp.path()).arg("ls").arg("backlog").assert().success();
let stdout = get_stdout(&mut cmd);
assert_eq!(stdout.matches("Odd Name").count(), 3);
@@ -209,7 +209,7 @@ fn ls_survives_a_malformed_created_at() {
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog").assert().success();
cmd.current_dir(temp.path()).arg("ls").arg("backlog").assert().success();
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("Bad Date"));
@@ -217,7 +217,7 @@ fn ls_survives_a_malformed_created_at() {
assert!(!stdout.contains("日本語"));
}
fn create_ticket_with_priority(worklane_dir: &std::path::PathBuf, title: &str, priority: &str) {
fn create_ticket_with_priority(worklane_dir: &std::path::Path, title: &str, priority: &str) {
let slug: String = title.to_lowercase().replace(' ', "-");
let body = format!(
"# {}\n\n## Metadata\n\n- **ID**: 00000000-0000-0000-0000-00000000000{}\n\
@@ -242,7 +242,7 @@ fn ls_sorts_by_priority_then_title() {
create_ticket(&worklane, "backlog", "No priority at all", "alice", "_Not set_");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog");
cmd.current_dir(temp.path()).arg("ls").arg("backlog");
let stdout = get_stdout(&mut cmd);
let at = |needle: &str| stdout.find(needle).unwrap_or_else(|| panic!("{needle} missing"));
@@ -261,7 +261,7 @@ fn ls_filters_by_priority_and_composes_with_status() {
create_ticket_with_priority(&worklane, "Lower one", "3");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["ls", "backlog", "--priority", "1"]);
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("Urgent one"));
@@ -269,7 +269,7 @@ fn ls_filters_by_priority_and_composes_with_status() {
// Same filter without a status, through the grouped listing
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(["ls", "--priority", "3"]);
cmd.current_dir(temp.path()).args(["ls", "--priority", "3"]);
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("Lower one"));
assert!(!stdout.contains("Urgent one"));
@@ -285,7 +285,7 @@ fn ls_shows_a_mark_for_the_level() {
create_ticket(&worklane, "backlog", "Nothing set", "alice", "_Not set_");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog");
cmd.current_dir(temp.path()).arg("ls").arg("backlog");
let stdout = get_stdout(&mut cmd);
// Piped, so no escapes: the glyph is carrying the level by itself
+23 -18
View File
@@ -2,7 +2,7 @@ use assert_cmd::Command;
use assert_fs::TempDir;
use assert_fs::fixture::{PathChild, PathCreateDir};
use std::fs;
use std::path::PathBuf;
use std::path::{Path, PathBuf};
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
@@ -17,8 +17,13 @@ fn setup_worklane(temp: &TempDir) -> PathBuf {
worklane.path().to_path_buf()
}
/// Every metadata field a ticket has, positionally. The lint is right that the call
/// site reads as a wall of strings, and the fix is a struct with named fields, but
/// that is a change to thirteen call sites in this file alone and belongs in its own
/// commit rather than in a warning sweep.
#[allow(clippy::too_many_arguments)]
fn create_ticket(
worklane_dir: &PathBuf,
worklane_dir: &Path,
status: &str,
title: &str,
description: &str,
@@ -89,7 +94,7 @@ fn mv_forwards_from_backlog_to_committed() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -133,7 +138,7 @@ fn mv_blocks_backward_move() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -163,7 +168,7 @@ fn mv_allows_backward_move_with_force() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -197,7 +202,7 @@ fn mv_blocks_nonsequential_forward_move() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -227,7 +232,7 @@ fn mv_allows_skipping_stages_with_force() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -259,7 +264,7 @@ fn mv_ignores_already_in_same_status() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -290,7 +295,7 @@ fn mv_rejects_invalid_status() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -320,7 +325,7 @@ fn mv_uses_ticket_id_for_resolution() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -354,7 +359,7 @@ fn mv_keeps_status_in_sync_across_consecutive_moves() {
for target in ["committed", "reviewing"] {
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -392,7 +397,7 @@ fn mv_repairs_legacy_status_field() {
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -415,7 +420,7 @@ fn mv_fails_when_status_field_is_missing() {
fs::write(&path, "# No Status\n\n## Metadata\n\n- **Owner**: jack\n").unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("mv")
.arg("abc123def4567")
.arg("--status")
@@ -498,7 +503,7 @@ fn mv_never_leaves_stale_content_in_the_target_directory() {
chmod(&source, 0o444);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.success();
@@ -541,7 +546,7 @@ fn mv_leaves_the_ticket_in_one_place_when_the_move_fails() {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
let assert = cmd
.current_dir(&temp.path())
.current_dir(temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.failure();
@@ -569,7 +574,7 @@ fn mv_leaves_the_ticket_in_one_place_when_the_move_fails() {
let mut retry = Command::cargo_bin(BIN_NAME).unwrap();
retry
.current_dir(&temp.path())
.current_dir(temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.success();
@@ -595,7 +600,7 @@ fn mv_leaves_nothing_behind_on_success() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.success();
@@ -625,7 +630,7 @@ fn mv_moves_the_resolved_ticket_when_two_share_a_title() {
}
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.args(["mv", "22222222", "--status", "committed"])
.assert()
.success();
+6 -6
View File
@@ -2,7 +2,7 @@ use assert_cmd::Command;
use assert_fs::TempDir;
use assert_fs::fixture::{PathChild, PathCreateDir};
use std::fs;
use std::path::PathBuf;
use std::path::{Path, PathBuf};
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
const UUID: &str = "475534a3-8a0d-45cb-9a97-39c251dd8e39";
@@ -20,7 +20,7 @@ fn setup_worklane(temp: &TempDir) -> PathBuf {
/// A fully populated ticket, with one criterion already ticked and a section the tool
/// knows nothing about, so every test can check both survive.
fn create_ticket(worklane: &PathBuf) -> String {
fn create_ticket(worklane: &Path) -> String {
let filename = format!("{}_original-title.md", UUID);
fs::write(
worklane.join("backlog").join(&filename),
@@ -61,11 +61,11 @@ fn create_ticket(worklane: &PathBuf) -> String {
fn run(temp: &TempDir, args: &[&str]) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(args);
cmd.current_dir(temp.path()).args(args);
cmd.assert().get_output().clone()
}
fn ticket(worklane: &PathBuf) -> String {
fn ticket(worklane: &Path) -> String {
let entry = fs::read_dir(worklane.join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
@@ -74,7 +74,7 @@ fn ticket(worklane: &PathBuf) -> String {
fs::read_to_string(entry.path()).unwrap()
}
fn stray_files(worklane: &PathBuf) -> Vec<String> {
fn stray_files(worklane: &Path) -> Vec<String> {
fs::read_dir(worklane)
.unwrap()
.filter_map(|e| e.ok())
@@ -327,7 +327,7 @@ fn append_replaces_an_empty_section_rather_than_following_its_placeholder() {
let worklane = setup_worklane(&temp);
let mut add = Command::cargo_bin(BIN_NAME).unwrap();
add.current_dir(&temp.path())
add.current_dir(temp.path())
.args(["add", "--title", "Bare ticket"])
.assert()
.success();
+20 -17
View File
@@ -16,8 +16,11 @@ fn setup_worklane(temp: &TempDir) -> std::path::PathBuf {
worklane.path().to_path_buf()
}
/// Same fixture, same trade as `cmd_mv.rs`: positional today, a struct when the call
/// sites in both files are converted together.
#[allow(clippy::too_many_arguments)]
fn create_ticket(
worklane_dir: &std::path::PathBuf,
worklane_dir: &std::path::Path,
status: &str,
title: &str,
description: &str,
@@ -86,7 +89,7 @@ fn show_displays_ticket_by_full_uuid() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("abc123def456789012345678901234567890")
.assert()
@@ -118,7 +121,7 @@ fn show_displays_ticket_by_partial_uuid() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("abc123def4567890")
.assert()
@@ -147,7 +150,7 @@ fn show_displays_ticket_by_title() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("login")
.assert()
@@ -178,7 +181,7 @@ fn show_displays_ticket_by_partial_title() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("fix")
.assert()
@@ -206,7 +209,7 @@ fn show_shows_both_uuid_and_title_in_output() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("test")
.assert()
@@ -222,7 +225,7 @@ fn show_fails_for_nonexistent_ticket() {
setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("nonexistent")
.assert()
@@ -259,7 +262,7 @@ fn show_asks_for_disambiguation_when_multiple_matches() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("est");
cmd.current_dir(temp.path()).arg("show").arg("est");
let stderr = get_stderr(&mut cmd);
assert!(stderr.contains("Multiple tickets found"));
@@ -299,7 +302,7 @@ fn show_reports_ambiguity_on_stderr_with_a_failing_exit() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("ambiguous")
.assert()
@@ -333,7 +336,7 @@ fn show_disambiguates_tickets_with_short_filenames() {
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("short");
cmd.current_dir(temp.path()).arg("show").arg("short");
let stderr = get_stderr(&mut cmd);
assert!(stderr.contains("Multiple tickets found"));
@@ -356,7 +359,7 @@ fn show_disambiguates_tickets_with_non_ascii_filenames() {
}
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("accented");
cmd.current_dir(temp.path()).arg("show").arg("accented");
let stderr = get_stderr(&mut cmd);
assert!(stderr.contains("Multiple tickets found"));
@@ -383,7 +386,7 @@ fn show_searches_across_all_statuses() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
cmd.current_dir(temp.path())
.arg("show")
.arg("committed")
.assert()
@@ -408,7 +411,7 @@ fn show_renders_the_priority_mark_beside_the_number() {
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Prio");
cmd.current_dir(temp.path()).arg("show").arg("Prio");
let stdout = get_stdout(&mut cmd);
// Mark for the eye, number still there for the file's sake
@@ -438,7 +441,7 @@ fn show_prints_the_title_once() {
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Once Only");
cmd.current_dir(temp.path()).arg("show").arg("Once Only");
let stdout = get_stdout(&mut cmd);
assert_eq!(
@@ -467,7 +470,7 @@ fn show_renders_the_metadata_as_an_aligned_table() {
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Table");
cmd.current_dir(temp.path()).arg("show").arg("Table");
let stdout = get_stdout(&mut cmd);
// Every value starts in the same column, sized by the longest field name
@@ -500,7 +503,7 @@ fn ticket_with(worklane: &std::path::Path, status: &str, uuid: &str, title: &str
fn show(temp: &TempDir, search: &str) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg(search);
cmd.current_dir(temp.path()).arg("show").arg(search);
cmd.assert().get_output().clone()
}
@@ -546,7 +549,7 @@ fn show_resolves_the_short_id_the_listing_prints() {
ticket_with(&worklane, "backlog", uuid, "Alpha", "alpha");
let mut ls = Command::cargo_bin(BIN_NAME).unwrap();
ls.current_dir(&temp.path()).args(["ls", "backlog"]);
ls.current_dir(temp.path()).args(["ls", "backlog"]);
let listing = String::from_utf8(ls.assert().success().get_output().stdout.clone()).unwrap();
// Take the id exactly as printed, so this couples to the display width rather
+1 -1
View File
@@ -15,7 +15,7 @@ fn setup_worklane(temp: &TempDir) {
fn run(temp: &TempDir, args: &[&str]) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(args);
cmd.current_dir(temp.path()).args(args);
cmd.assert().get_output().clone()
}