Compare commits

...
7 Commits
Author SHA1 Message Date
Ansho ReiandClaude Opus 5 78831f1a39 (f6af387) Add the board view, and bump to 0.7.0
worklane was one-shot commands only, so reading the board meant running ls again
and again and nothing ever showed the four statuses side by side, which is the
one view a kanban flow is for.

Four columns, a card per ticket carrying the priority mark, short id, title,
owner and due. Arrows or hjkl to move, enter for the detail view, q to quit.
Read only: moving a card by keypress is a follow-up, kept out until the watch
and render loop were solid.

Modelled on frig throughout, same crates and same shape: event poll on a 250ms
timeout so the tick runs when nobody is typing, a panic hook that leaves the
alternate screen before the backtrace, and the terminal restored on the error
path as well as on quit. A bare worklane opens it, as a bare frig does, so
Cli::command is now an Option.

The watch looks at files, not directories. A directory's mtime only moves on
create and rename, so a ticket edited in place would be missed; the digest
hashes every ticket and comment file's path, length and mtime. Comment files
are in it because a comment added elsewhere has to reach the detail view. It
guards the rescan rather than the draw, since ratatui diffs its buffer but
reading the tree every frame would not be free. notify is deliberately not a
dependency, and the reason is on the ticket.

Two orderings are deliberate. The worklane directory is looked for before the
terminal, so running outside one gives the usual message rather than a complaint
about the tty, and both errors stay testable without a pty. And a missing tty is
refused by name, since raw mode on a pipe fails with a bare "No such device or
address" that explains nothing.

The palette is now a Color enum rather than a string, so the escape the CLI
writes and the ratatui colour the board draws come from one definition and a
colour missing from either is a compile error. That retires the test which
existed only to catch a name with no entry, the failure that once left magenta
undefined.

Cards come from collect_ticket_items, so there is no second parser;
TicketItem gained the path the detail view opens. content_trim and
format_comments_with take the colour decision, because ratatui draws spans and
would print an escape as literal bytes.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 11:44:37 +02:00
Ansho ReiandClaude Opus 5 bbb1568a0f (eadaca9) Add check and uncheck for one acceptance criterion, and bump to 0.6.0
Criteria are stored as - [ ] lines and nothing could tick one, so marking
progress meant replacing the whole list through set, losing the state of every
other item.

check and uncheck are separate commands rather than one verb with a flag,
sharing CheckArgs and cmd_check. The criterion is an index first and a substring
second, so a criterion whose text is literally "2" is reachable only by
substring. A number out of range is reported as a bad index rather than as a
substring that missed.

Only the character between the brackets is spliced, so the text keeps whatever
indentation and spacing it had. Criteria are counted inside the Acceptance
Criteria section only, so a checkbox written into a description is not a
criterion and a handwritten line in the section takes no number.

With the criterion omitted, the criteria are listed and the number asked for
when stdin is a terminal. Where it is not, the same list comes back as an error
instead. Prompting regardless would leave the opencode wrapper blocked on a
stdin that never closes, and that is the choice resolve_ticket already makes for
an ambiguous match, for the same reason: the wrapper keeps stderr and throws on
the code, so a list printed to stdout would be discarded.

Any listing of a subset keeps the real numbers. Renumbering the matches from one
would contradict the advice to use the number and point at the wrong criterion.

show now numbers the criteria as "1. [x] text", so the index is visible where
the ticket is read. That also drops a manual prefix strip, so clippy is one
warning below where it started.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 10:46:07 +02:00
Ansho ReiandClaude Opus 5 3810e442c6 (da03690) Add set and append for editing a ticket, and bump to 0.5.0
Nothing could change a ticket after it was created. mv wrote status, comment
appended a file, and that was the whole set of mutations, so correcting a typo
or adding a criterion meant hand editing the markdown.

Two commands rather than the one vague "edit" the ticket described. set replaces
a field, append adds to a section, so the verb carries the meaning instead of a
prefix on seven flag names, and append only offers the three sections that hold
multiple lines. Owner is absent from both, it belongs to the chown command filed
alongside this, and status stays mv's. One field, one writer.

Sections are a table, DESCRIPTION, ACCEPTANCE and PLAN, each carrying a heading,
a label, the placeholder add writes when empty, and a kind. Both commands walk
it, so a section added later is one entry rather than edits in two places.

Everything is targeted line surgery and never a regenerated file, which is what
keeps a ticked criterion ticked and a handwritten section intact when an
unrelated field changes. Appending to a numbered section continues from the
count already there rather than renumbering above it, so a handwritten line
survives exactly as written. Appending to an empty section replaces the
placeholder instead of following it.

An empty value is a paragraph break for a section and a usage error for a
scalar, since it looks like a way to clear a field and clearing is not supported
yet. No-op detection compares the whole file before and after each edit, so a
field set to the value it already holds is reported unchanged and nothing is
written.

Two things came out of building it. move_ticket_file's staged write is extracted
as write_then_replace, now the only way any ticket file is written. And the file
is located by uuid rather than by title: titles are not unique, add allows
duplicates on purpose, and the old title scan meant mv <uuid-of-second> moved
the first ticket sharing its title. Reproduced, fixed, and pinned by a test.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 02:36:20 +02:00
Ansho ReiandClaude Opus 5 6c43e62a4b (8cc254c, 47aa0fe, a1dbd60) Fix the documented examples and the add tool schema
Three doc tickets in one commit, since two of them are the same check: run
everything the docs claim and see what fails.

8cc254c: the add example in the kanban skill passed -t twice, once where -g for
tags was meant, and gave -p three bare positional values instead of three flags.
Clap rejected it with exit 2, reproduced verbatim. Rewritten, with a line saying
why -t is not tags and why each step needs its own -p, since the example alone
does not explain the trap. The "--due (or --due)" filler is gone; --due and
--priority have no short form and now say so.

a1dbd60: only title is required in the add schema now. The other six fields were
unmarked, so the model had to invent a value for every field on every ticket.
The other four tool schemas were checked and are already right: ls is fully
optional, and the required arguments on show, mv and comment are genuinely
required. Every add field was already guarded in execute, so an omitted field
adds no flag.

47aa0fe: the README row it describes was already fixed in passing by ddbd45e,
which rewrote it for the priority work. "ls --status" appears nowhere. What was
left was the second criterion, and running every example turned up a different
problem: the 141 exit code documented for a truncated pipe only happens when the
output exceeds the 64 KiB a pipe holds. A short listing lands in the buffer
whole and reports 0. That was my own wording from b28ddb9 and it is now precise.

Every example in both files was run against the built binary, with real ids
substituted where they use placeholders, and the four documented exit codes were
measured rather than assumed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 01:18:36 +02:00
Ansho ReiandClaude Opus 5 39ee86e308 (4c516e6) Preserve paragraph breaks in ticket descriptions, and bump to 0.4.1
The opencode add tool split the description on newlines and then dropped the
empty ones with filter(Boolean), so every multi paragraph description arrived as
a single paragraph, against the tool's own instruction to separate paragraphs
with newlines.

cmd_add needed no change for this. Joining the values with a single newline is
what makes an empty value a paragraph break, so the capability was already
there and only the wrapper was throwing it away. Verified by hand before
touching anything.

The wrapper now keeps interior blanks and trims only the ends, and only trims
trailing whitespace within a line, since leading whitespace is what makes a
nested list or an indented block survive. --acceptance and --plan keep dropping
blanks: each value there is one criterium or step, so an empty line is spacing.

trim_blank_ends in cmd_add makes the second criterion hold whoever calls it, not
just the wrapper: blank values at either end are dropped so a break never lands
against a section heading, and an all-blank description reads as none. Interior
runs are kept verbatim rather than collapsed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 00:29:22 +02:00
Ansho ReiandClaude Opus 5 5a7cfeb849 (b8aa66b) Evaluate ticket resolution in tiers, from four characters up, and bump to 0.4.0
resolve_ticket ORed the uuid prefix, title and filename predicates into one flat
list, so an exact prefix match was reported as ambiguous against any title that
merely mentioned that id. Reproduced: `show 641e3d5` on a board where another
ticket's title quoted it failed with "Multiple tickets found", and told the user
to use the displayed id, which was the id they had just used.

The three tiers are now evaluated in order and the first non-empty one wins
outright, which is what AGENTS.md always claimed.

The ticket also asked for prefix matching to require eight characters, and that
is not implemented. The guard it replaced read short_id.len() >= 8 where
short_id was always the full uuid, so it was always true and any length already
worked. Eight would have regressed that: ls prints seven characters, so the id
the tool displays would drop out of the uuid tier and lose to any title quoting
it, which is the very bug above. MIN_ID_SEARCH is four, so a short search is
still text and `show 641` remains a title search.

Docs corrected in four places that all stated the eight character rule: README,
AGENTS.md, the opencode tool descriptions and the kanban skill.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 23:38:29 +02:00
Ansho ReiandClaude Opus 5 e20396ce6b (322150c) Make mv crash-safe by writing before renaming, and bump to 0.3.3
cmd_mv renamed the ticket into its new directory and only then wrote the updated
content, so a write that failed left the ticket in the target directory still
claiming the old status. Reproduced with a read-only ticket file: the move
reported a bare "Permission denied" and left the file in committed/ carrying
"Status: backlog".

move_ticket_file now stages the content in a temp file, renames it over the
source, and only then renames the file into the target directory. Two atomic
steps, so a partial write is discarded and the original is untouched. The other
obvious order, writing to the target and deleting the source afterwards, was
rejected because it has the ticket in two directories at once.

The worst case left is a ticket still in its old directory with a Status one
move ahead, which the next mv corrects since the directory is what decides the
current status. Tested, including the retry.

The temp file is staged under .worklane/ rather than beside the ticket, so a
leftover from a hard kill is invisible to ticket lookup and to the listing
instead of appearing as a stray untitled ticket. IO errors now name the ticket
and the path rather than propagating bare.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 23:12:17 +02:00
17 changed files with 4059 additions and 193 deletions
+68 -6
View File
@@ -35,12 +35,15 @@ Add a new ticket to the backlog.
- `--acceptance` (or `-a`): Acceptance criteria (repeat flag for each criterium)
- `--plan` (or `-p`): Implementation plan steps (repeat flag for each step)
- `--tags` (or `-g`): Tags (comma-separated)
- `--due` (or `--due`): Due date in YYYY-MM-DD format
- `--due`: Due date in YYYY-MM-DD format. No short form
- `--owner` (or `-o`): Owner name
- `--priority`: Priority level, 1 (most urgent) to 5 (least). Unset if omitted
- `--priority`: Priority level, 1 (most urgent) to 5 (least). Unset if omitted. No short form
Tags are `-g`, not `-t`: `-t` is the title, and passing it twice is an error. Each
plan step needs its own `-p`, since a bare value after one is not a second step.
```bash
worklane add -t "Implement login" -d "Add user login page" -t login,auth -p "Design UI" "Build backend" "Write tests" --due 2026-06-01 --owner "ilya"
worklane add -t "Implement login" -d "Add user login page" -g login,auth -p "Design UI" -p "Build backend" -p "Write tests" --due 2026-06-01 --owner "ilya"
```
When there's multiple acceptance criteria, add each using a separate `--acceptance` or `-a` flag.
@@ -79,7 +82,7 @@ worklane show "ticket title or uuid"
Move a ticket between statuses.
**Positional arguments:**
- `<id>`: Ticket UUID (8+ characters) or title
- `<id>`: Ticket UUID prefix (4+ characters) or title
**Required options:**
- `--status <target>`: Target status (`backlog`, `committed`, `reviewing`, `done`)
@@ -98,12 +101,69 @@ worklane mv a1b2c3d4 --status committed # Move by UUID prefix
worklane mv "My Ticket" --status done -f # Move by title with force
```
### `worklane set`
Replace fields on an existing ticket. Only the fields given are touched; ticked
criteria and handwritten sections are left alone. At least one field is required.
**Positional arguments:**
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
**Options:** `--title`, `--description` (or `-d`), `--acceptance` (or `-a`), `--plan`
(or `-p`), `--tags` (or `-g`), `--due`, `--priority`
Owner is not settable here, and neither is status: `mv` owns status. Changing the
title renames the file, keeping the UUID.
```bash
worklane set a1b2c3d4 --priority 1
worklane set a1b2c3d4 --title "A clearer title" --due 2026-12-31
worklane set a1b2c3d4 -a "First criterium" -a "Second criterium"
```
### `worklane append`
Add to a section without replacing what is there. The description gains a new
paragraph; criteria and steps go on the end of their lists, steps numbered on from
the last. At least one section is required.
**Positional arguments:**
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
**Options:** `--description` (or `-d`), `--acceptance` (or `-a`), `--plan` (or `-p`)
```bash
worklane append a1b2c3d4 -d "A paragraph amending the description."
worklane append a1b2c3d4 -a "One more criterium"
worklane append a1b2c3d4 -p "A later step"
```
### `worklane check` and `worklane uncheck`
Tick or untick a single acceptance criterion. Every other criterion keeps its state,
and handwritten lines in the section are left alone.
**Positional arguments:**
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
- `[criterion]`: The number as shown by `worklane show`, or a substring of its text
Omit the criterion and the numbered criteria are listed and the number asked for. With
no terminal, as when driving the CLI from a tool, the same list comes back as an error
instead, so re-run with the number. A substring matching more than one criterion is an
error listing the matches with their real numbers.
```bash
worklane check a1b2c3d4 2
worklane check a1b2c3d4 "renames the file"
worklane uncheck a1b2c3d4 2
```
### `worklane comment`
Add a comment to a ticket.
**Positional arguments:**
- `<ticket>`: Ticket UUID (8+ characters) or title
- `<ticket>`: Ticket UUID prefix (4+ characters) or title
- `<body>`: Comment text
Comments are stored as timestamped markdown files in `.worklane/comments/<ticket-uuid>/` and include the git author and timestamp.
@@ -122,4 +182,6 @@ worklane comment a1b2c3d4 "LGTM, approved"
2. Use `worklane ls [status]` to view tickets by status
3. Use `worklane show <id>` to view full ticket details
4. Use `worklane mv <id> --status <target>` to move tickets through the workflow
5. Use `worklane comment <ticket> <body>` to add notes to tickets
5. Use `worklane set <ticket>` to correct a field, or `worklane append <ticket>` to add to a section
6. Use `worklane check <ticket> <n>` to tick a criterion as it is met
7. Use `worklane comment <ticket> <body>` to add notes to tickets
+230 -24
View File
@@ -38,6 +38,39 @@ async function run(cmd: string[], context: ToolContext): Promise<string> {
return stdout.trim();
}
/**
* Description lines as worklane wants them, one --description value per line,
* blank ones included.
*
* cmd_add joins the values with a single newline, so an empty value is how a
* paragraph break is spelled. Dropping the blanks here, which is what the old
* filter(Boolean) did, collapsed every multi paragraph description into a single
* paragraph, against this tool's own instruction to separate paragraphs with
* newlines.
*
* Only the ends are trimmed, and only trailing whitespace within a line. Leading
* whitespace is content: it is what makes a nested markdown list or an indented
* block survive the trip.
*/
function descriptionLines(text: string): string[] {
const lines = text.split("\n").map((line: string) => line.trimEnd());
let start = 0;
let end = lines.length;
while (start < end && lines[start] === "") start++;
while (end > start && lines[end - 1] === "") end--;
return lines.slice(start, end);
}
/** One value per non-empty line, for the arguments that hold a list of items. */
function itemLines(text: string): string[] {
return text
.split("\n")
.map((line: string) => line.trim())
.filter(Boolean);
}
export const init = tool({
description:
"Initialize worklane in the current project. Creates the .worklane/ directory with backlog, committed, reviewing, and done subdirectories.",
@@ -54,28 +87,37 @@ export const init = tool({
export const add = tool({
description:
"Add a new ticket to the worklane backlog. Requires a title. Description, acceptance criteria, and plan each support multiple lines (one item per line). Tags are comma-separated.",
// Title is the only required field. Every other flag is left off entirely when
// the field is omitted, so an unmarked schema only forced the model to invent a
// value for fields it had nothing to say about.
args: {
title: tool.schema
.string()
.describe("Ticket title (required)"),
description: tool.schema
.string()
.describe("Description text. Use newlines between paragraphs."),
.describe("Description text. Use newlines between paragraphs.")
.optional(),
acceptance: tool.schema
.string()
.describe("Acceptance criteria, one per line. Put each criterium on its own line."),
.describe("Acceptance criteria, one per line. Put each criterium on its own line.")
.optional(),
plan: tool.schema
.string()
.describe("Implementation plan steps, one per line. Put each step on its own line."),
.describe("Implementation plan steps, one per line. Put each step on its own line.")
.optional(),
tags: tool.schema
.string()
.describe("Comma-separated tags, e.g. 'bug,frontend,urgent'"),
.describe("Comma-separated tags, e.g. 'bug,frontend,urgent'")
.optional(),
due: tool.schema
.string()
.describe("Due date in YYYY-MM-DD format"),
.describe("Due date in YYYY-MM-DD format")
.optional(),
owner: tool.schema
.string()
.describe("Ticket owner name. If omitted, defaults to the git user."),
.describe("Ticket owner name. If omitted, defaults to the git user.")
.optional(),
priority: tool.schema
.string()
.describe("Priority level, 1 (most urgent) to 5 (least). Left unset if omitted.")
@@ -87,27 +129,21 @@ export const add = tool({
}
const cmd: string[] = ["add", "--title", args.title];
if (args.description) {
args.description
.split("\n")
.map((l: string) => l.trim())
.filter(Boolean)
.forEach((line: string) => cmd.push("--description", line));
descriptionLines(args.description).forEach((line: string) =>
cmd.push("--description", line),
);
}
// Blanks are dropped from these two on purpose: each value is one criterium or
// one step, so an empty line between them is spacing rather than content.
if (args.acceptance) {
args.acceptance
.split("\n")
.map((l: string) => l.trim())
.filter(Boolean)
.forEach((line: string) => cmd.push("--acceptance", line));
itemLines(args.acceptance).forEach((line: string) =>
cmd.push("--acceptance", line),
);
}
if (args.plan) {
args.plan
.split("\n")
.map((l: string) => l.trim())
.filter(Boolean)
.forEach((line: string) => cmd.push("--plan", line));
itemLines(args.plan).forEach((line: string) => cmd.push("--plan", line));
}
if (args.tags) cmd.push("--tags", args.tags);
@@ -155,7 +191,7 @@ export const show = tool({
args: {
id: tool.schema
.string()
.describe("Ticket UUID (8+ chars) or title substring (required)"),
.describe("Ticket UUID prefix (4+ chars) or title substring (required)"),
},
async execute(args: Record<string, any>, context: ToolContext) {
if (!args.id) {
@@ -175,7 +211,7 @@ export const mv = tool({
args: {
ticket: tool.schema
.string()
.describe("Ticket UUID (8+ chars) or title substring (required)"),
.describe("Ticket UUID prefix (4+ chars) or title substring (required)"),
status: tool.schema
.enum(["backlog", "committed", "reviewing", "done"])
.describe("Target status (required)"),
@@ -207,7 +243,7 @@ export const comment = tool({
args: {
ticket: tool.schema
.string()
.describe("Ticket UUID (8+ chars) or title substring (required)"),
.describe("Ticket UUID prefix (4+ chars) or title substring (required)"),
body: tool.schema
.string()
.describe("Comment body text (required). Supports markdown formatting and multiple paragraphs separated by newlines."),
@@ -234,3 +270,173 @@ export const comment = tool({
}
},
});
export const set = tool({
description:
"Replace fields on an existing worklane ticket. Only the fields given are touched; everything else in the file, including ticked criteria and handwritten sections, is left alone. Owner is not settable here, use chown. Status is not settable here, use mv. To add to a section instead of replacing it, use append.",
args: {
ticket: tool.schema
.string()
.describe("Ticket UUID prefix (4+ chars) or title substring (required)"),
title: tool.schema
.string()
.describe("New title. The file is renamed to match, keeping the UUID.")
.optional(),
description: tool.schema
.string()
.describe("New description, replacing the whole section. Use newlines between paragraphs.")
.optional(),
acceptance: tool.schema
.string()
.describe("New acceptance criteria, one per line, replacing the whole list.")
.optional(),
plan: tool.schema
.string()
.describe("New implementation plan steps, one per line, replacing the whole list.")
.optional(),
tags: tool.schema
.string()
.describe("New comma-separated tags, replacing the existing ones.")
.optional(),
due: tool.schema
.string()
.describe("New due date in YYYY-MM-DD format")
.optional(),
priority: tool.schema
.string()
.describe("New priority level, 1 (most urgent) to 5 (least)")
.optional(),
},
async execute(args: Record<string, any>, context: ToolContext) {
if (!args.ticket) {
return "Error setting fields: ticket is required";
}
const cmd: string[] = ["set", args.ticket];
if (args.title) cmd.push("--title", args.title);
if (args.description) {
descriptionLines(args.description).forEach((line: string) =>
cmd.push("--description", line),
);
}
if (args.acceptance) {
itemLines(args.acceptance).forEach((line: string) =>
cmd.push("--acceptance", line),
);
}
if (args.plan) {
itemLines(args.plan).forEach((line: string) => cmd.push("--plan", line));
}
if (args.tags) cmd.push("--tags", args.tags);
if (args.due) cmd.push("--due", args.due);
if (args.priority) cmd.push("--priority", String(args.priority));
if (cmd.length === 2) {
return "Error setting fields: give at least one field to change";
}
try {
return await run(cmd, context);
} catch (err: any) {
return `Error setting fields: ${err.message}`;
}
},
});
export const append = tool({
description:
"Add to a section of an existing worklane ticket without replacing what is there. The description gains a new paragraph; acceptance criteria and plan steps are added to the end of their lists, with steps numbered on from the last. Ticked criteria and handwritten content are left alone. To replace a section outright, use set.",
args: {
ticket: tool.schema
.string()
.describe("Ticket UUID prefix (4+ chars) or title substring (required)"),
description: tool.schema
.string()
.describe("Text to add as a new paragraph at the end of the description.")
.optional(),
acceptance: tool.schema
.string()
.describe("Acceptance criteria to add, one per line.")
.optional(),
plan: tool.schema
.string()
.describe("Implementation plan steps to add, one per line.")
.optional(),
},
async execute(args: Record<string, any>, context: ToolContext) {
if (!args.ticket) {
return "Error appending: ticket is required";
}
const cmd: string[] = ["append", args.ticket];
if (args.description) {
descriptionLines(args.description).forEach((line: string) =>
cmd.push("--description", line),
);
}
if (args.acceptance) {
itemLines(args.acceptance).forEach((line: string) =>
cmd.push("--acceptance", line),
);
}
if (args.plan) {
itemLines(args.plan).forEach((line: string) => cmd.push("--plan", line));
}
if (cmd.length === 2) {
return "Error appending: give at least one section to add to";
}
try {
return await run(cmd, context);
} catch (err: any) {
return `Error appending: ${err.message}`;
}
},
});
/**
* check and uncheck differ only in the verb, so the tool is built once.
*
* The criterion is required here even though the CLI makes it optional: without it the
* CLI prompts, and there is no terminal on this side of the pipe. The CLI answers a
* missing criterion with the numbered list on stderr, which run() relays, so the model
* sees the options and can retry with a number.
*/
function checkboxTool(verb: "check" | "uncheck") {
const past = verb === "check" ? "Checked" : "Unchecked";
return tool({
description:
`${past === "Checked" ? "Tick" : "Untick"} one acceptance criterion on a worklane ticket. ` +
"Every other criterion keeps its state. Identify the criterion by its number as shown by show, " +
"or by a substring of its text; a substring matching more than one is an error listing them.",
args: {
ticket: tool.schema
.string()
.describe("Ticket UUID prefix (4+ chars) or title substring (required)"),
criterion: tool.schema
.string()
.describe(
"Criterion number as shown by show, or a substring of its text (required)",
),
},
async execute(args: Record<string, any>, context: ToolContext) {
if (!args.ticket) {
return `Error running ${verb}: ticket is required`;
}
if (!args.criterion) {
return `Error running ${verb}: criterion is required, give the number or a substring`;
}
try {
return await run([verb, args.ticket, String(args.criterion)], context);
} catch (err: any) {
return `Error running ${verb}: ${err.message}`;
}
},
});
}
export const check = checkboxTool("check");
export const uncheck = checkboxTool("uncheck");
+47 -5
View File
@@ -1,9 +1,13 @@
# AGENTS.md
## Project Structure
- `src/main.rs` - All application logic
- `src/main.rs` - dispatch, the SIGPIPE reset, and the TUI event loop
- `src/command.rs` - CLI argument definitions using clap derive
- `tests/` - Integration tests using `assert_cmd` and `assert_fs`
- `src/handlers.rs` - one `cmd_*` per subcommand
- `src/util.rs` - the ticket format, resolution, rendering and the palette
- `src/tui.rs` - board state, the change digest, and the ratatui draw
- `tests/` - Integration tests using `assert_cmd` and `assert_fs`, one file per command
- Unit tests live beside the code in `#[cfg(test)] mod tests`, in `util.rs`, `handlers.rs` and `tui.rs`
- Ticket files stored as `.md` in `.worklane/<status>/` directories
## Ticket File Format
@@ -37,10 +41,45 @@
- The ticket positionals (`show <id>`, `mv <ticket>`, `comment <ticket>`) are also left alone, so a search term starting with a hyphen is a usage error. Reachable now that a hyphen-leading title can be stored: use the UUID, or put the flags first and separate with `--`, as in `mv --status committed -- -leading-title`
- A bare `--` is a value when it follows an option (`--title -- ` stores `--`) and clap's end-of-options marker when it sits in a positional. So a `comment` body of exactly `--` needs its own separator, `comment <ticket> -- --`. Without it the body is reported missing and nothing is written, which is a clear failure rather than a silent drop
- `add` has no positionals, so anything after a bare `--` is an unexpected argument and fails
- **A paragraph break in a description is an empty `--description` value.** `cmd_add` joins the values with a single newline, so `-d "First." -d "" -d "Second."` writes the blank line. `trim_blank_ends()` drops blank values at either end, so a break never lands against a section heading, and an all-blank description reads as no description. Interior runs are kept verbatim rather than collapsed
- `--acceptance` and `--plan` are lists, one criterium or step per value, so a blank there is spacing rather than content and the opencode wrapper drops it. Only `--description` preserves blanks
### Editing a Ticket
- `set` replaces a field, `append` adds to a section. The verb carries the meaning, so no flag needs a replace-or-append prefix, and `append` only offers the sections that hold multiple lines
- **One field, one writer.** `set` has no `--owner` (that is `chown`'s, once it exists) and no `--status` (that is `mv`'s). Do not add either
- Sections are a table in `util.rs`: `DESCRIPTION`, `ACCEPTANCE`, `PLAN`, each with a heading, a label, the placeholder `add` writes when empty, and a `SectionKind`. Adding a section later is one entry, not edits in both commands
- Everything is targeted line surgery, never a regenerated file. That is what keeps a ticked criterion ticked and a handwritten `## Notes` section intact when an unrelated field changes. `section_body()` finds the lines to touch, `set_metadata_line()` does the metadata, and every other byte is copied through
- Appending to a numbered section continues from the count of steps already there and does not renumber what is above it, so a handwritten line in the section survives exactly as written
- Appending to an empty section replaces the placeholder rather than following it, or the ticket would read `_No description provided._` above its description
- An empty value is a paragraph break for the three sections and a usage error for the scalars, via `non_empty` in `command.rs`. Clearing a field is not supported yet, and the error says so rather than guessing
- No-op detection compares the whole file before and after each edit, so a field set to the value it already holds is reported unchanged and nothing is written
- `find_ticket_file()` matches on the uuid, never the title. Duplicate titles are allowed, so a title scan can land on a different ticket than the one resolved: `mv <uuid-of-second>` used to move the first ticket sharing its title
- `write_then_replace()` is the only way a ticket file is written. Content first, rename second, so a failure leaves a correct ticket under a stale name rather than a half-written one
### Checking Off a Criterion
- `check` and `uncheck` are separate commands, not one verb with a flag. They share `CheckArgs` and `cmd_check(args, checked)`
- `criteria()` is scoped to the Acceptance Criteria section and counts only checkbox lines, so a checkbox written into a description is not a criterion and a handwritten line inside the section takes no number
- `set_criterion()` splices only the character between the brackets. Rebuilding the line would normalise its indentation and whatever spacing followed the checkbox
- The criterion argument is an index first, a substring second, so a criterion whose text is literally `2` is reachable only by substring
- **A number out of range is a bad index, not a failed substring search**, and says so. `is_index()` makes that distinction
- Any listing of a subset must keep the real numbers, via `numbered_criteria()`. Renumbering the matches from one contradicts the advice to use the number and points at the wrong criterion
- With the criterion omitted: prompt when stdin is a terminal, otherwise return the numbered list as an error. Never prompt unconditionally, the opencode wrapper has no tty and would block on a stdin that never closes. This is the same choice `resolve_ticket` makes for an ambiguous match, and for the same reason
- `show` numbers the criteria as `1. [x] text`, so the index is visible where the ticket is read. The number replaces the list marker rather than joining it
### The Board View
- `worklane` with no subcommand and `worklane tui` both open it, the way a bare `frig` does. `Cli::command` is therefore an `Option`
- The worklane directory is looked for **before** the terminal, so running outside one gives the usual "No .worklane directory found" rather than a complaint about the tty. Both errors stay reachable and both are testable without a pty
- A missing tty is refused with a message naming a subcommand. Raw mode on a pipe fails with a bare "No such device or address (os error 6)", which explains nothing
- **The watch looks at files, not directories.** A directory's mtime only moves on create and rename, so a ticket edited in place would be missed. `digest()` hashes every ticket and comment file's path, length and mtime. Comment files are in it because a comment added elsewhere has to reach the detail view
- The digest guards the *rescan*, not the draw. ratatui diffs its buffer, so drawing every iteration is free; reading the tree every iteration is not
- `notify` is deliberately not a dependency. Polling a tree of tens of small files on the 250ms tick is enough, and the reason is recorded on f6af387
- Cards come from `collect_ticket_items`, the same source `ls` uses, so there is no second parser. `TicketItem::path` exists for the detail view
- The detail view renders with colour off. ratatui draws styled spans, so an escape sequence in a paragraph would be printed as literal bytes. `content_trim` and `format_comments_with` take the colour decision for that reason
- Read only. Moving a card by keypress is a follow-up, deliberately kept out until the watch and render loop were solid
### Color and Output
- Use `color_text()` helper for colored output — it respects `should_use_colors()` (terminal detection)
- Color codes are defined in `get_color()`: red (31), cyan (36), orange (33), green (32), grey (38;5;8), magenta (1;35), brightred (38;5;9)
- Use `color_text()` for coloured output — it respects `should_use_colors()` (terminal detection), and `paint()` is the same with the decision passed in
- **The palette is the `Color` enum, not a string.** `Color::ansi()` gives the CLI its SGR sequence and `From<Color> for ratatui::style::Color` gives the TUI its equivalent, so a colour that exists for one renderer and not the other is a compile error. The stringly-typed version needed a test for exactly that, and a missing entry silently produced an empty prefix, which is how `magenta` came to be undefined
- Reset color with `\x1b[0m` after colored text
- Bold uses `\x1b[1;35m` (magenta bold)
- Always test color output works correctly in both terminal and pipe modes
@@ -62,11 +101,14 @@
- Rules under headings are measured on the displayed name in characters, never on the raw line or in bytes
- `resolve_ticket()` scans all status directories — it's the single source for ticket lookup by UUID prefix, title, or filename
- `parse_ticket_field()` handles extracting metadata values from markdown format
- `move_ticket_file()` stages the updated content in a temp file under `.worklane/`, renames it over the source, and only then renames the file into the target directory. Do not reorder these: renaming first and writing second leaves a ticket in its new directory claiming the old status, and writing to the target then deleting the source puts it in two directories at once. The temp lives outside the status directories so a leftover is never read as a ticket. A failure at the last step leaves the ticket in its old directory with a Status one move ahead, which the next `mv` corrects
- Field lookup, read and write, is scoped to the lines under the `## Metadata` heading and anchored to the start of the line. Prose above it is free text: tickets in this repo quote field markers in their descriptions, and an unscoped search reads or rewrites those instead. `set_status_field()` carries the same scoping
### Ticket Resolution
- `resolve_ticket()` returns `(status, title, content)` tuple
- Priority: exact UUID prefix (8+ chars) > title substring > filename substring
- Three tiers, evaluated in order: UUID prefix > title substring > filename substring. The first non-empty tier wins outright and later tiers are not consulted. This is not cosmetic: ticket titles reference other tickets by id, so a flat OR of the three reported an exact prefix match as ambiguous against whichever title mentioned it
- The UUID tier applies from `MIN_ID_SEARCH` (4) characters up. Not 8: `ls` prints `SHORT_ID_WIDTH` (7) characters, so a longer minimum would drop the printed id out of the UUID tier and let any title quoting it win instead. Below the minimum the search is text, so `show 641` is a title search
- The filename tier earns its place by reaching the middle of a UUID, which the prefix tier cannot. It is also why a short UUID search still resolves under a longer minimum, just at the wrong precedence, so a test for the minimum needs a decoy title to be meaningful
- Ambiguous matches (multiple results) print options and exit(1)
- Never return empty strings for required fields — use `_Not set_` or `_None_` as defaults
Generated
+484 -17
View File
@@ -11,6 +11,12 @@ dependencies = [
"memchr",
]
[[package]]
name = "allocator-api2"
version = "0.2.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "683d7910e743518b0e34f1186f92494becacb047c7b6bf616c96772180fef923"
[[package]]
name = "android_system_properties"
version = "0.1.5"
@@ -56,7 +62,7 @@ version = "1.1.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "40c48f72fd53cd289104fc64099abca73db4166ad86ea0b4341abe65af83dadc"
dependencies = [
"windows-sys",
"windows-sys 0.61.2",
]
[[package]]
@@ -67,7 +73,7 @@ checksum = "291e6a250ff86cd4a820112fb8898808a366d8f9f58ce16d1f538353ad55747d"
dependencies = [
"anstyle",
"once_cell_polyfill",
"windows-sys",
"windows-sys 0.61.2",
]
[[package]]
@@ -135,6 +141,21 @@ version = "3.20.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "5d20789868f4b01b2f2caec9f5c4e0213b41e3e5702a50157d699ae31ced2fcb"
[[package]]
name = "cassowary"
version = "0.3.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "df8670b8c7b9dae1793364eafadf7239c40d669904660c5960d74cfd80b46a53"
[[package]]
name = "castaway"
version = "0.2.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "dec551ab6e7578819132c713a93c022a05d60159dc86e7a7050223577484c55a"
dependencies = [
"rustversion",
]
[[package]]
name = "cc"
version = "1.2.62"
@@ -196,7 +217,7 @@ dependencies = [
"heck",
"proc-macro2",
"quote",
"syn",
"syn 2.0.117",
]
[[package]]
@@ -211,6 +232,20 @@ version = "1.0.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1d07550c9036bf2ae0c684c4297d503f838287c83c53686d05370d0e139ae570"
[[package]]
name = "compact_str"
version = "0.8.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7fd622ebbb56a5b2ccb651b32b911cdeb2a9b4b11776b2473bf26a26a286244e"
dependencies = [
"castaway",
"cfg-if",
"itoa",
"rustversion",
"ryu",
"static_assertions",
]
[[package]]
name = "core-foundation-sys"
version = "0.8.7"
@@ -242,6 +277,65 @@ version = "0.8.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d0a5c400df2834b80a4c3327b3aad3a4c4cd4de0629063962b03235697506a28"
[[package]]
name = "crossterm"
version = "0.28.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "829d955a0bb380ef178a640b91779e3987da38c9aea133b20614cfed8cdea9c6"
dependencies = [
"bitflags",
"crossterm_winapi",
"mio",
"parking_lot",
"rustix 0.38.44",
"signal-hook",
"signal-hook-mio",
"winapi",
]
[[package]]
name = "crossterm_winapi"
version = "0.9.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "acdd7c62a3665c7f6830a51635d9ac9b23ed385797f70a83bb8bafe9c572ab2b"
dependencies = [
"winapi",
]
[[package]]
name = "darling"
version = "0.24.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ed17f5901b6630b993ca003def43f2f8ef4014fc13b047b57aad617ff32bc2ec"
dependencies = [
"darling_core",
"darling_macro",
]
[[package]]
name = "darling_core"
version = "0.24.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "6837e2cf7485aaae18f86181d2f0e9a7ed297a025e220aeabf63fdebd3a2ddff"
dependencies = [
"ident_case",
"proc-macro2",
"quote",
"strsim",
"syn 3.0.3",
]
[[package]]
name = "darling_macro"
version = "0.24.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "2ac7135c3ef02b2f7833bbeb1be5ba7f966dcde8a87c6b87f65a778d71a02785"
dependencies = [
"darling_core",
"quote",
"syn 3.0.3",
]
[[package]]
name = "difflib"
version = "0.4.0"
@@ -254,6 +348,12 @@ version = "0.3.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "780955b8b195a21ab8e4ac6b60dd1dbdcec1dc6c51c0617964b08c81785e12c9"
[[package]]
name = "either"
version = "1.18.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "252afb9ae5eaa683babdc6a068b3f5726eb19e05070c731f9b2a23a7c3e8ed34"
[[package]]
name = "equivalent"
version = "1.0.2"
@@ -267,7 +367,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "39cab71617ae0d63f51a36d69f866391735b51691dbda63cf6f96d042b63efeb"
dependencies = [
"libc",
"windows-sys",
"windows-sys 0.61.2",
]
[[package]]
@@ -355,6 +455,8 @@ version = "0.15.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "9229cfe53dfd69f0609a49f65461bd93001ea1ef889cd5529dd176593f5338a1"
dependencies = [
"allocator-api2",
"equivalent",
"foldhash",
]
@@ -400,6 +502,12 @@ version = "2.3.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "3d3067d79b975e8844ca9eb072e16b31c3c1c36928edf9c6789548c524d0d954"
[[package]]
name = "ident_case"
version = "1.0.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b9e0384b61958566e926dc50660321d12159025e767c18e043daf26b70104c39"
[[package]]
name = "ignore"
version = "0.4.25"
@@ -428,12 +536,43 @@ dependencies = [
"serde_core",
]
[[package]]
name = "indoc"
version = "2.0.7"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "79cf5c93f93228cf8efb3ba362535fb11199ac548a09ce117c9b1adc3030d706"
dependencies = [
"rustversion",
]
[[package]]
name = "instability"
version = "0.3.13"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "2bf84e73fa6f27f299dec58e13223cf70db80da872eb921d4f6138342a0eabc8"
dependencies = [
"darling",
"indoc",
"proc-macro2",
"quote",
"syn 3.0.3",
]
[[package]]
name = "is_terminal_polyfill"
version = "1.70.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "a6cb138bb79a146c1bd460005623e142ef0181e3d0219cb493e02f7d08a35695"
[[package]]
name = "itertools"
version = "0.13.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "413ee7dfc52ee1a4949ceeb7dbc8a33f2d6c088194d9f922fb8318faf1f01186"
dependencies = [
"either",
]
[[package]]
name = "itoa"
version = "1.0.18"
@@ -464,24 +603,60 @@ version = "0.2.186"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "68ab91017fe16c622486840e4c83c9a37afeff978bd239b5293d61ece587de66"
[[package]]
name = "linux-raw-sys"
version = "0.4.15"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d26c52dbd32dccf2d10cac7725f8eae5296885fb5703b261f7d0a0739ec807ab"
[[package]]
name = "linux-raw-sys"
version = "0.12.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "32a66949e030da00e8c7d4434b251670a91556f4144941d37452769c25d58a53"
[[package]]
name = "lock_api"
version = "0.4.14"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "224399e74b87b5f3557511d98dff8b14089b3dadafcab6bb93eab67d3aace965"
dependencies = [
"scopeguard",
]
[[package]]
name = "log"
version = "0.4.29"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "5e5032e24019045c762d3c0f28f5b6b8bbf38563a65908389bf7978758920897"
[[package]]
name = "lru"
version = "0.12.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "234cf4f4a04dc1f57e24b96cc0cd600cf2af460d4161ac5ecdd0af8e1f3b2a38"
dependencies = [
"hashbrown 0.15.5",
]
[[package]]
name = "memchr"
version = "2.8.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f8ca58f447f06ed17d5fc4043ce1b10dd205e060fb3ce5b979b8ed8e59ff3f79"
[[package]]
name = "mio"
version = "1.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "30d65c71f1ce40ab09135ce117d742b9f8a19ff91a41a8b57ed50bc2de59c427"
dependencies = [
"libc",
"log",
"wasi",
"windows-sys 0.61.2",
]
[[package]]
name = "num-traits"
version = "0.2.19"
@@ -503,6 +678,35 @@ version = "1.70.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "384b8ab6d37215f3c5301a95a4accb5d64aa607f1fcb26a11b5303878451b4fe"
[[package]]
name = "parking_lot"
version = "0.12.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "93857453250e3077bd71ff98b6a65ea6621a19bb0f559a85248955ac12c45a1a"
dependencies = [
"lock_api",
"parking_lot_core",
]
[[package]]
name = "parking_lot_core"
version = "0.9.12"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "2621685985a2ebf1c516881c026032ac7deafcda1a2c9b7850dc81e3dfcb64c1"
dependencies = [
"cfg-if",
"libc",
"redox_syscall",
"smallvec",
"windows-link",
]
[[package]]
name = "paste"
version = "1.0.15"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "57c0d7b74b563b49d38dae00a0c37d4d6de9b432382b2892f0574ddcae73fd0a"
[[package]]
name = "pin-project-lite"
version = "0.2.17"
@@ -543,7 +747,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "479ca8adacdd7ce8f1fb39ce9ecccbfe93a3f1344b3d0d97f20bc0196208f62b"
dependencies = [
"proc-macro2",
"syn",
"syn 2.0.117",
]
[[package]]
@@ -570,6 +774,36 @@ version = "6.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f8dcc9c7d52a811697d2151c701e0d08956f92b0e24136cf4cf27b57a6a0d9bf"
[[package]]
name = "ratatui"
version = "0.29.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "eabd94c2f37801c20583fc49dd5cd6b0ba68c716787c2dd6ed18571e1e63117b"
dependencies = [
"bitflags",
"cassowary",
"compact_str",
"crossterm",
"indoc",
"instability",
"itertools",
"lru",
"paste",
"strum",
"unicode-segmentation",
"unicode-truncate",
"unicode-width 0.2.0",
]
[[package]]
name = "redox_syscall"
version = "0.5.18"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ed2bf2547551a7053d6fdfafda3f938979645c44812fbfcda098faae3f1a362d"
dependencies = [
"bitflags",
]
[[package]]
name = "regex-automata"
version = "0.4.14"
@@ -587,6 +821,19 @@ version = "0.8.10"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "dc897dd8d9e8bd1ed8cdad82b5966c3e0ecae09fb1907d58efaa013543185d0a"
[[package]]
name = "rustix"
version = "0.38.44"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "fdb5bc1ae2baa591800df16c9ca78619bf65c0488b41b96ccec5d11220d8c154"
dependencies = [
"bitflags",
"errno",
"libc",
"linux-raw-sys 0.4.15",
"windows-sys 0.59.0",
]
[[package]]
name = "rustix"
version = "1.1.4"
@@ -596,8 +843,8 @@ dependencies = [
"bitflags",
"errno",
"libc",
"linux-raw-sys",
"windows-sys",
"linux-raw-sys 0.12.1",
"windows-sys 0.61.2",
]
[[package]]
@@ -606,6 +853,12 @@ version = "1.0.22"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b39cdef0fa800fc44525c84ccb54a029961a8215f9619753635a9c0d2538d46d"
[[package]]
name = "ryu"
version = "1.0.23"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "9774ba4a74de5f7b1c1451ed6cd5285a32eddb5cccb8cc655a4e50009e06477f"
[[package]]
name = "same-file"
version = "1.0.6"
@@ -615,6 +868,12 @@ dependencies = [
"winapi-util",
]
[[package]]
name = "scopeguard"
version = "1.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "94143f37725109f92c262ed2cf5e59bce7498c01bcc1502d7b9afe439a4e9f49"
[[package]]
name = "semver"
version = "1.0.28"
@@ -647,7 +906,7 @@ checksum = "d540f220d3187173da220f885ab66608367b6574e925011a9353e4badda91d79"
dependencies = [
"proc-macro2",
"quote",
"syn",
"syn 2.0.117",
]
[[package]]
@@ -669,18 +928,83 @@ version = "1.3.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "0fda2ff0d084019ba4d7c6f371c95d8fd75ce3524c3cb8fb653a3023f6323e64"
[[package]]
name = "signal-hook"
version = "0.3.18"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d881a16cf4426aa584979d30bd82cb33429027e42122b169753d6ef1085ed6e2"
dependencies = [
"libc",
"signal-hook-registry",
]
[[package]]
name = "signal-hook-mio"
version = "0.2.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b75a19a7a740b25bc7944bdee6172368f988763b744e3d4dfe753f6b4ece40cc"
dependencies = [
"libc",
"mio",
"signal-hook",
]
[[package]]
name = "signal-hook-registry"
version = "1.4.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c4db69cba1110affc0e9f7bcd48bbf87b3f4fc7c61fc9155afd4c469eb3d6c1b"
dependencies = [
"errno",
"libc",
]
[[package]]
name = "slab"
version = "0.4.12"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "0c790de23124f9ab44544d7ac05d60440adc586479ce501c1d6d7da3cd8c9cf5"
[[package]]
name = "smallvec"
version = "1.15.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "8ed6a63f02c8539c91a8685a86f4099661ba3da017932f6ebbea6de3f0fa7c90"
[[package]]
name = "static_assertions"
version = "1.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "a2eb9349b6444b326872e140eb1cf5e7c522154d69e7a0ffb0fb81c06b37543f"
[[package]]
name = "strsim"
version = "0.11.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7da8b5736845d9f2fcb837ea5d9e2628564b3b043a70948a3f0b778838c5fb4f"
[[package]]
name = "strum"
version = "0.26.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "8fec0f0aef304996cf250b31b5a10dee7980c85da9d759361292b8bca5a18f06"
dependencies = [
"strum_macros",
]
[[package]]
name = "strum_macros"
version = "0.26.4"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "4c6bee85a5a24955dc440386795aa378cd9cf82acd5f764469152d2270e581be"
dependencies = [
"heck",
"proc-macro2",
"quote",
"rustversion",
"syn 2.0.117",
]
[[package]]
name = "syn"
version = "2.0.117"
@@ -692,6 +1016,17 @@ dependencies = [
"unicode-ident",
]
[[package]]
name = "syn"
version = "3.0.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "53e9bae58849f64dfa4f5d5ae372c8341f7305f82a3868709269343628b659a3"
dependencies = [
"proc-macro2",
"quote",
"unicode-ident",
]
[[package]]
name = "tempfile"
version = "3.27.0"
@@ -701,8 +1036,8 @@ dependencies = [
"fastrand",
"getrandom",
"once_cell",
"rustix",
"windows-sys",
"rustix 1.1.4",
"windows-sys 0.61.2",
]
[[package]]
@@ -717,6 +1052,35 @@ version = "1.0.24"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e6e4313cd5fcd3dad5cafa179702e2b244f760991f45397d14d4ebf38247da75"
[[package]]
name = "unicode-segmentation"
version = "1.13.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c6f5d3c3b1bf09027a88a6bc961fc00497d651009560b5463668dc81b0fa87a8"
[[package]]
name = "unicode-truncate"
version = "1.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b3644627a5af5fa321c95b9b235a72fd24cd29c648c2c379431e6628655627bf"
dependencies = [
"itertools",
"unicode-segmentation",
"unicode-width 0.1.14",
]
[[package]]
name = "unicode-width"
version = "0.1.14"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7dd6e30e90baa6f72411720665d41d89b9a3d039dc45b8faea1ddd07f617f6af"
[[package]]
name = "unicode-width"
version = "0.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1fc81956842c57dac11422a97c3b8195a1ff727f06e85c84ed2e8aa277c9a0fd"
[[package]]
name = "unicode-xid"
version = "0.2.6"
@@ -759,6 +1123,12 @@ dependencies = [
"winapi-util",
]
[[package]]
name = "wasi"
version = "0.11.1+wasi-snapshot-preview1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ccf3ec651a847eb01de73ccad15eb7d99f80485de043efb2f370cd654f4ea44b"
[[package]]
name = "wasip2"
version = "1.0.3+wasi-0.2.9"
@@ -809,7 +1179,7 @@ dependencies = [
"bumpalo",
"proc-macro2",
"quote",
"syn",
"syn 2.0.117",
"wasm-bindgen-shared",
]
@@ -856,15 +1226,37 @@ dependencies = [
"semver",
]
[[package]]
name = "winapi"
version = "0.3.9"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "5c839a674fcd7a98952e593242ea400abe93992746761e38641405d28b00f419"
dependencies = [
"winapi-i686-pc-windows-gnu",
"winapi-x86_64-pc-windows-gnu",
]
[[package]]
name = "winapi-i686-pc-windows-gnu"
version = "0.4.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ac3b87c63620426dd9b991e5ce0329eff545bccbbb34f3be09ff6fb6ab51b7b6"
[[package]]
name = "winapi-util"
version = "0.1.11"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c2a7b1c03c876122aa43f3020e6c3c3ee5c05081c9a00739faf7503aeba10d22"
dependencies = [
"windows-sys",
"windows-sys 0.61.2",
]
[[package]]
name = "winapi-x86_64-pc-windows-gnu"
version = "0.4.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "712e227841d057c1ee1cd2fb22fa7e5a5461ae8e48fa2ca79ec42cfc1931183f"
[[package]]
name = "windows-core"
version = "0.62.2"
@@ -886,7 +1278,7 @@ checksum = "053e2e040ab57b9dc951b72c264860db7eb3b0200ba345b4e4c3b14f67855ddf"
dependencies = [
"proc-macro2",
"quote",
"syn",
"syn 2.0.117",
]
[[package]]
@@ -897,7 +1289,7 @@ checksum = "3f316c4a2570ba26bbec722032c4099d8c8bc095efccdc15688708623367e358"
dependencies = [
"proc-macro2",
"quote",
"syn",
"syn 2.0.117",
]
[[package]]
@@ -924,6 +1316,15 @@ dependencies = [
"windows-link",
]
[[package]]
name = "windows-sys"
version = "0.59.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1e38bc4d79ed67fd075bcc251a1c39b32a1776bbe92e5bef1f0bf1f8c531853b"
dependencies = [
"windows-targets",
]
[[package]]
name = "windows-sys"
version = "0.61.2"
@@ -933,6 +1334,70 @@ dependencies = [
"windows-link",
]
[[package]]
name = "windows-targets"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "9b724f72796e036ab90c1021d4780d4d3d648aca59e491e6b98e725b84e99973"
dependencies = [
"windows_aarch64_gnullvm",
"windows_aarch64_msvc",
"windows_i686_gnu",
"windows_i686_gnullvm",
"windows_i686_msvc",
"windows_x86_64_gnu",
"windows_x86_64_gnullvm",
"windows_x86_64_msvc",
]
[[package]]
name = "windows_aarch64_gnullvm"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "32a4622180e7a0ec044bb555404c800bc9fd9ec262ec147edd5989ccd0c02cd3"
[[package]]
name = "windows_aarch64_msvc"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "09ec2a7bb152e2252b53fa7803150007879548bc709c039df7627cabbd05d469"
[[package]]
name = "windows_i686_gnu"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "8e9b5ad5ab802e97eb8e295ac6720e509ee4c243f69d781394014ebfe8bbfa0b"
[[package]]
name = "windows_i686_gnullvm"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "0eee52d38c090b3caa76c563b86c3a4bd71ef1a819287c19d586d7334ae8ed66"
[[package]]
name = "windows_i686_msvc"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "240948bc05c5e7c6dabba28bf89d89ffce3e303022809e73deaefe4f6ec56c66"
[[package]]
name = "windows_x86_64_gnu"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "147a5c80aabfbf0c7d901cb5895d1de30ef2907eb21fbbab29ca94c5b08b1a78"
[[package]]
name = "windows_x86_64_gnullvm"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "24d5b23dc417412679681396f2b49f3de8c1473deb516bd34410872eff51ed0d"
[[package]]
name = "windows_x86_64_msvc"
version = "0.52.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "589f6da84c646204747d1270a2a5661ea66ed1cced2631d546fdfb155959f9ec"
[[package]]
name = "wit-bindgen"
version = "0.51.0"
@@ -969,7 +1434,7 @@ dependencies = [
"heck",
"indexmap",
"prettyplease",
"syn",
"syn 2.0.117",
"wasm-metadata",
"wit-bindgen-core",
"wit-component",
@@ -985,7 +1450,7 @@ dependencies = [
"prettyplease",
"proc-macro2",
"quote",
"syn",
"syn 2.0.117",
"wit-bindgen-core",
"wit-bindgen-rust",
]
@@ -1029,14 +1494,16 @@ dependencies = [
[[package]]
name = "worklane"
version = "0.3.2"
version = "0.7.0"
dependencies = [
"anyhow",
"assert_cmd",
"assert_fs",
"chrono",
"clap",
"crossterm",
"libc",
"ratatui",
"tempfile",
"uuid",
]
+3 -1
View File
@@ -1,6 +1,6 @@
[package]
name = "worklane"
version = "0.3.2"
version = "0.7.0"
edition = "2024"
[dependencies]
@@ -9,6 +9,8 @@ anyhow = "1"
uuid = { version = "1", features = ["v4"] }
chrono = { version = "0.4", features = ["serde"] }
libc = "0.2"
ratatui = "0.29"
crossterm = "0.28"
[dev-dependencies]
assert_cmd = "2"
+11 -1
View File
@@ -5,11 +5,16 @@ Worklane is a local Kanban flow for agentic software development.
## Commands
| Command | Description |
|---------|-------------|
| `worklane` or `worklane tui` | Opens the board: four status columns, redrawn when the tree changes. Read only. Arrows or `hjkl` to move, `enter` for detail, `q` to quit |
| `worklane init` | Creates `.worklane/` with backlog, committed, reviewing, done directories |
| `worklane add` | Creates a ticket in backlog with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--owner`, `--priority` flags |
| `worklane ls [status]` | Lists tickets, sorted by priority then title. Optional positional status, and `--priority <1-5>` |
| `worklane show <id>` | Shows ticket by UUID prefix (8+ chars) or title substring |
| `worklane show <id>` | Shows ticket by UUID prefix (4+ chars), title substring, or filename substring |
| `worklane mv <id> --status <target> [-f]` | Moves ticket between statuses. Default: forward only, one stage at a time. `-f` bypasses both restrictions |
| `worklane set <ticket>` | Replaces fields with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--priority`. At least one required. Changing the title renames the file, keeping the UUID |
| `worklane append <ticket>` | Adds to a section with `--description`, `--acceptance`, `--plan`. At least one required. The description gains a paragraph; list items go on the end, steps numbered on from the last |
| `worklane check <ticket> [criterion]` | Ticks one acceptance criterion, by number as shown by `show` or by a substring. Prompts with the numbered list if omitted, or errors with it when there is no terminal |
| `worklane uncheck <ticket> [criterion]` | Unticks one acceptance criterion, addressed the same way |
| `worklane comment <ticket> <body>` | Adds a comment to a ticket by UUID or title |
## Exit codes
@@ -24,3 +29,8 @@ Worklane is a local Kanban flow for agentic software development.
the default signal disposition so a truncated pipe is quiet, the way `head` and
`sort` are, rather than printing a panic. A script using `set -o pipefail` will see
141 for a case that is not a failure, so guard for it there.
Whether a truncated pipe reports 141 or 0 depends on the size of the output, not on
the command. A pipe holds 64 KiB, so a listing that fits lands in the buffer whole
and the writer never learns the reader left, giving 0. Only output past that gets far
enough to be cut off. Either way nothing is printed to stderr.
+119 -1
View File
@@ -33,8 +33,24 @@ const VERSION: &str = concat!(env!("CARGO_PKG_VERSION"), " (", env!("WORKLANE_GI
#[command(version = VERSION)]
#[command(propagate_version = true)]
pub struct Cli {
/// Absent opens the board view, the way a bare `frig` does.
#[command(subcommand)]
pub command: Command,
pub command: Option<Command>,
}
/// Reject an empty value at parse time, so it lands as a usage error rather than a
/// runtime one.
///
/// An empty value looks like a way to clear a field, and clearing is not supported
/// yet. Refusing it keeps the gap visible and stops an accidentally empty variable
/// from silently blanking a field. Only the scalars use this: for the multi-line
/// sections an empty value is a paragraph break.
fn non_empty(raw: &str) -> Result<String, String> {
if raw.trim().is_empty() {
return Err("value cannot be empty, and clearing a field is not supported yet".to_string());
}
Ok(raw.to_string())
}
/// Arguments that carry prose, and therefore have to accept a value starting with
@@ -119,6 +135,21 @@ pub enum Command {
force: bool,
},
/// Replace fields on an existing ticket
Set(SetArgs),
/// Add to a section of an existing ticket
Append(AppendArgs),
/// Open the board view
Tui,
/// Tick an acceptance criterion
Check(CheckArgs),
/// Untick an acceptance criterion
Uncheck(CheckArgs),
/// Add a comment to a ticket
Comment {
/// Ticket UUID or title
@@ -133,3 +164,90 @@ pub enum Command {
owner: Option<String>,
},
}
/// `set` replaces a field outright. Owner is deliberately absent: `chown` owns that
/// field, and status is `mv`'s, so no field has two writers.
///
/// The group makes at least one field mandatory, so a bare `worklane set <ticket>` is
/// a usage error rather than a silent no-op.
#[derive(clap::Args)]
#[command(group(
clap::ArgGroup::new("set_fields")
.required(true)
.multiple(true)
.args(["title", "description", "acceptance", "plan", "tags", "due", "priority"])
))]
pub struct SetArgs {
/// Ticket UUID or title
pub ticket: String,
/// Replace the ticket title, renaming the file to match
#[arg(short, long, allow_hyphen_values = PROSE, value_parser = non_empty)]
pub title: Option<String>,
/// Replace the description. Repeat the flag for more lines, empty for a paragraph break
#[arg(short, long, allow_hyphen_values = PROSE)]
pub description: Vec<String>,
/// Replace the acceptance criteria. Repeat the flag, one criterium per value
#[arg(short, long, allow_hyphen_values = PROSE)]
pub acceptance: Vec<String>,
/// Replace the implementation plan. Repeat the flag, one step per value
#[arg(short, long, allow_hyphen_values = PROSE)]
pub plan: Vec<String>,
/// Replace the tags
#[arg(short = 'g', long, value_parser = non_empty)]
pub tags: Vec<String>,
/// Replace the due date (YYYY-MM-DD)
#[arg(long, value_parser = non_empty)]
pub due: Option<String>,
/// Replace the priority, 1 (most urgent) to 5 (least)
#[arg(long, value_parser = priority_level)]
pub priority: Option<u8>,
}
/// `append` only offers the sections that hold multiple lines, since appending to a
/// scalar has no meaning.
#[derive(clap::Args)]
#[command(group(
clap::ArgGroup::new("append_fields")
.required(true)
.multiple(true)
.args(["description", "acceptance", "plan"])
))]
pub struct AppendArgs {
/// Ticket UUID or title
pub ticket: String,
/// Add a paragraph to the description. Repeat the flag for more lines within it
#[arg(short, long, allow_hyphen_values = PROSE)]
pub description: Vec<String>,
/// Add acceptance criteria. Repeat the flag, one criterium per value
#[arg(short, long, allow_hyphen_values = PROSE)]
pub acceptance: Vec<String>,
/// Add implementation plan steps, numbered on from the last. Repeat the flag
#[arg(short, long, allow_hyphen_values = PROSE)]
pub plan: Vec<String>,
}
/// `check` and `uncheck` are separate commands rather than one verb with a flag,
/// because the two read as opposites at the call site and neither needs the other's
/// name to make sense.
///
/// The criterion is optional: without it the criteria are listed and the index asked
/// for, or, where there is no terminal to ask at, returned as an error carrying the
/// same list.
#[derive(clap::Args)]
pub struct CheckArgs {
/// Ticket UUID or title
pub ticket: String,
/// Criterion index as shown by `show`, or a substring of its text. Prompts if omitted
pub criterion: Option<String>,
}
+428 -48
View File
@@ -1,9 +1,10 @@
use anyhow::{Result, anyhow};
use chrono::Local;
use std::fs;
use std::io::Write;
use std::io::{BufRead, IsTerminal, Write};
use std::path::Path;
use crate::command::{AppendArgs, CheckArgs, SetArgs};
use crate::util::*;
pub fn cmd_init(start: &Path) -> Result<()> {
@@ -83,7 +84,7 @@ pub fn cmd_ls(
if items.is_empty() {
continue;
}
let status_header = color_text(&format!("[{}]", status.to_uppercase()), "orange");
let status_header = color_text(&format!("[{}]", status.to_uppercase()), Color::Orange);
println!("\n{}", status_header);
display_ticket_items(&items);
}
@@ -136,6 +137,9 @@ pub fn cmd_add(
return Err(anyhow!("A ticket with this title already exists."));
}
// Joined with a single newline, so an empty value is how a caller spells a
// paragraph break and an all-blank description is no description at all.
let description = trim_blank_ends(description);
let description_text = if description.is_empty() {
"_No description provided._".to_string()
} else {
@@ -206,7 +210,8 @@ pub fn cmd_add(
Ok(())
}
fn read_comments(comments_dir: &Path) -> Result<Vec<(String, String, String, String)>> {
/// Public for the TUI's detail view, which shows the same comments `show` does.
pub fn read_comments(comments_dir: &Path) -> Result<Vec<(String, String, String, String)>> {
if !comments_dir.exists() {
return Ok(vec![]);
}
@@ -297,7 +302,7 @@ pub fn cmd_show(search: &str, worklane_dir: &Path) -> Result<()> {
// The only title in the output: content_trim_colored used to print it a second
// time from the file content. Green per the colour guideline, and the rule is
// measured in characters so a non-ASCII title is not over-drawn.
println!("{}", color_text(&title, "green"));
println!("{}", color_text(&title, Color::Green));
println!("{}", "─".repeat(title.chars().count()));
println!("\n{}", content_trim_colored(&content));
@@ -311,6 +316,120 @@ pub fn cmd_show(search: &str, worklane_dir: &Path) -> Result<()> {
Ok(())
}
/// Write `content` over `path`, without ever leaving half a file behind.
///
/// Staged in a temp file and renamed into place, because `fs::write` truncates before
/// it writes and a partial write would corrupt the ticket. The temp sits under
/// `.worklane/` rather than beside the ticket, so a leftover from a hard kill is
/// invisible to ticket lookup and to the listing instead of showing up as a stray
/// untitled ticket.
fn write_then_replace(
worklane_dir: &Path,
path: &Path,
filename: &str,
content: &str,
title: &str,
) -> Result<()> {
let temp = worklane_dir.join(format!(".wl-{}.tmp", filename));
if let Err(e) = fs::write(&temp, content) {
let _ = fs::remove_file(&temp);
return Err(anyhow!(
"Could not stage the update for ticket '{}' at {}: {}",
title,
temp.display(),
e
));
}
if let Err(e) = fs::rename(&temp, path) {
let _ = fs::remove_file(&temp);
return Err(anyhow!(
"Could not write ticket '{}' at {}: {}",
title,
path.display(),
e
));
}
Ok(())
}
/// The ticket file in `dir` carrying `uuid`.
///
/// Matched on the uuid, not the title. Titles are not unique, `add` allows duplicates
/// on purpose, so a title scan could land on a different ticket than the one that was
/// resolved: `mv <uuid-of-second>` moved the first ticket sharing its title.
fn find_ticket_file(dir: &Path, uuid: &str, title: &str) -> Result<String> {
if uuid.trim().is_empty() || is_unknown_value(uuid) {
return Err(anyhow!(
"Ticket '{}' has no ID field, so its file cannot be located",
title
));
}
for entry in fs::read_dir(dir)? {
let entry = entry?;
let path = entry.path();
if !path.extension().map_or(false, |e| e == "md") {
continue;
}
let name = match path.file_name() {
Some(name) => name.to_string_lossy().to_string(),
None => continue,
};
if name.starts_with(uuid) {
return Ok(name);
}
}
Err(anyhow!(
"Could not find the file for ticket '{}' in {}",
title,
dir.display()
))
}
/// Put `content` in `filename` and move it from `from` to `to`, without ever
/// leaving the ticket in two status directories or with half a file in it.
///
/// Two atomic steps, in this order. The content is staged in a temp file and
/// renamed over the source, so a partial write is thrown away and the original is
/// untouched. Only then is the file renamed into the target directory.
///
/// The old order renamed first and wrote second, so a failure in between left the
/// ticket sitting in its new directory still claiming the old status. Writing
/// straight to the target and deleting the source afterwards would instead have it
/// in both directories at once. Neither happens here. The worst case is a ticket
/// still in its old directory carrying a Status field one move ahead, which the
/// next `mv` corrects, since the directory is what decides the current status.
fn move_ticket_file(
worklane_dir: &Path,
from: &Path,
to: &Path,
filename: &str,
content: &str,
title: &str,
) -> Result<()> {
let source = from.join(filename);
let dest = to.join(filename);
write_then_replace(worklane_dir, &source, filename, content, title)?;
// The content is correct and in one place by now, so a failure here leaves the
// ticket where it started rather than half moved.
fs::rename(&source, &dest).map_err(|e| {
anyhow!(
"Could not move ticket '{}' to {}: {}",
title,
dest.display(),
e
)
})
}
pub fn cmd_mv(ticket_id: &str, target_status: &str, force: bool, start: &Path) -> Result<()> {
let valid_statuses = ["backlog", "committed", "reviewing", "done"];
let forward_order = ["backlog", "committed", "reviewing", "done"];
@@ -324,7 +443,7 @@ pub fn cmd_mv(ticket_id: &str, target_status: &str, force: bool, start: &Path) -
}
let worklane_dir = find_worklane_dir(start)?;
let (current_status, title, _) = resolve_ticket(ticket_id, &worklane_dir)?;
let (current_status, title, resolved) = resolve_ticket(ticket_id, &worklane_dir)?;
let current_idx = forward_order
.iter()
@@ -338,8 +457,8 @@ pub fn cmd_mv(ticket_id: &str, target_status: &str, force: bool, start: &Path) -
if !force && target_idx < current_idx {
return Err(anyhow!(
"Cannot move backward from {} to {}. Use --force (-f) to allow.",
color_text(&current_status, "orange"),
color_text(target_status, "orange"),
color_text(&current_status, Color::Orange),
color_text(target_status, Color::Orange),
));
}
@@ -352,7 +471,7 @@ pub fn cmd_mv(ticket_id: &str, target_status: &str, force: bool, start: &Path) -
if current_status == target_status {
println!(
"Ticket is already in '{}' status.",
color_text(&target_status, "orange")
color_text(&target_status, Color::Orange)
);
return Ok(());
}
@@ -360,51 +479,27 @@ pub fn cmd_mv(ticket_id: &str, target_status: &str, force: bool, start: &Path) -
let current_path = worklane_dir.join(&current_status);
let target_path = worklane_dir.join(target_status);
// Find the ticket file
let mut found_filename = String::new();
for entry in fs::read_dir(&current_path)? {
let entry = entry?;
let path = entry.path();
if path.extension().map_or(false, |e| e == "md") {
let file_content = fs::read_to_string(&path)?;
let file_title = file_content
.lines()
.find(|l| l.starts_with("# "))
.map(|l| l[2..].trim())
.unwrap_or("")
.to_string();
if file_title == title {
found_filename = path.file_name().unwrap().to_string_lossy().to_string();
break;
}
}
}
// Updated before the file is even located, so a ticket without a Status field is
// refused for that reason rather than for whatever the lookup notices first.
let content = set_status_field(&resolved, target_status, &title)?;
if found_filename.is_empty() {
return Err(anyhow!(
"Could not find ticket file in {}",
color_text(&current_status, "orange")
));
}
let found_filename =
find_ticket_file(&current_path, &parse_ticket_field(&resolved, "ID"), &title)?;
// Read and update the ticket content before touching the filesystem, so a ticket
// without a Status field is never half-moved.
let source_path = current_path.join(&found_filename);
let content = fs::read_to_string(&source_path)?;
let content = set_status_field(&content, target_status, &title)?;
// Move the file
let dest_path = target_path.join(&found_filename);
fs::rename(&source_path, &dest_path)?;
// Write back updated content
fs::write(&dest_path, content)?;
move_ticket_file(
&worklane_dir,
&current_path,
&target_path,
&found_filename,
&content,
&title,
)?;
println!(
"Moved ticket '{}' from {} to {}",
color_text(&title, "green"),
color_text(&current_status, "orange"),
color_text(target_status, "orange"),
color_text(&title, Color::Green),
color_text(&current_status, Color::Orange),
color_text(target_status, Color::Orange),
);
Ok(())
@@ -488,3 +583,288 @@ pub fn cmd_comment(
println!("Comment added to '{}' ({})", title, filename);
Ok(())
}
/// The sections `set` and `append` can rewrite, paired with the flag that carries them.
///
/// One list, so both commands walk the same table and a section added later needs no
/// change here.
fn section_args<'a>(
description: &'a [String],
acceptance: &'a [String],
plan: &'a [String],
) -> [(&'static Section, &'a [String]); 3] {
[
(&DESCRIPTION, description),
(&ACCEPTANCE, acceptance),
(&PLAN, plan),
]
}
/// Write the ticket back, renaming the file when a new title changes its slug.
///
/// The content goes down first and the rename second, the same order and for the same
/// reason as `mv`: a failure at the rename leaves a correct ticket under a stale name,
/// which lookup still finds by uuid or title, rather than a half-written one.
fn save_ticket(
worklane_dir: &Path,
status: &str,
uuid: &str,
title: &str,
new_title: Option<&String>,
content: &str,
) -> Result<()> {
let status_path = worklane_dir.join(status);
let filename = find_ticket_file(&status_path, uuid, title)?;
let path = status_path.join(&filename);
write_then_replace(worklane_dir, &path, &filename, content, title)?;
// The uuid is kept, so the new name cannot collide with another ticket, and an
// unchanged slug means there is nothing to rename.
if let Some(new_title) = new_title {
let renamed = format!("{}_{}.md", uuid, slug(new_title));
if renamed != filename {
let destination = status_path.join(&renamed);
fs::rename(&path, &destination).map_err(|e| {
anyhow!(
"Ticket '{}' was updated but could not be renamed to {}: {}",
title,
destination.display(),
e
)
})?;
}
}
Ok(())
}
fn report(fields: &[&str], title: &str, verb: &str) {
if fields.is_empty() {
println!("No changes to '{}'", color_text(title, Color::Green));
return;
}
println!(
"{} {} on '{}'",
verb,
fields.join(", "),
color_text(title, Color::Green)
);
}
pub fn cmd_set(args: &SetArgs, start: &Path) -> Result<()> {
let worklane_dir = find_worklane_dir(start)?;
let (status, title, original) = resolve_ticket(&args.ticket, &worklane_dir)?;
let uuid = parse_ticket_field(&original, "ID");
let mut content = original.clone();
let mut changed: Vec<&str> = Vec::new();
// Each edit is compared against the content going in, so a field set to the value
// it already holds is reported as unchanged rather than claimed as an update.
let mut apply = |content: &mut String, field: &'static str, next: String| {
if *content != next {
content.clone_from(&next);
changed.push(field);
}
};
if let Some(new_title) = &args.title {
let next = set_title(&content, new_title)?;
apply(&mut content, "title", next);
}
for (section, values) in section_args(&args.description, &args.acceptance, &args.plan) {
if values.is_empty() {
continue;
}
let items = section.normalise(values);
if items.is_empty() {
return Err(anyhow!(
"An empty {} is not a way to clear the section, and clearing is not supported yet",
section.label
));
}
let next = set_section_body(&content, section, &items)?;
apply(&mut content, section.label, next);
}
if !args.tags.is_empty() {
let next = set_metadata_field(&content, "Tags", &args.tags.join(", "), &title)?;
apply(&mut content, "tags", next);
}
if let Some(due) = &args.due {
let next = set_metadata_field(&content, "Due", due, &title)?;
apply(&mut content, "due", next);
}
if let Some(priority) = args.priority {
let next = set_metadata_field(&content, "Priority", &priority.to_string(), &title)?;
apply(&mut content, "priority", next);
}
if changed.is_empty() {
report(&changed, &title, "Updated");
return Ok(());
}
let renamed = changed.contains(&"title").then_some(()).and(args.title.as_ref());
save_ticket(&worklane_dir, &status, &uuid, &title, renamed, &content)?;
let shown = args.title.clone().unwrap_or(title);
report(&changed, &shown, "Updated");
Ok(())
}
pub fn cmd_append(args: &AppendArgs, start: &Path) -> Result<()> {
let worklane_dir = find_worklane_dir(start)?;
let (status, title, original) = resolve_ticket(&args.ticket, &worklane_dir)?;
let uuid = parse_ticket_field(&original, "ID");
let mut content = original.clone();
let mut changed: Vec<&str> = Vec::new();
for (section, values) in section_args(&args.description, &args.acceptance, &args.plan) {
if values.is_empty() {
continue;
}
let items = section.normalise(values);
if items.is_empty() {
return Err(anyhow!(
"Nothing to append to the {}: every value given was blank",
section.label
));
}
content = append_section_body(&content, section, &items)?;
changed.push(section.label);
}
save_ticket(&worklane_dir, &status, &uuid, &title, None, &content)?;
report(&changed, &title, "Appended to");
Ok(())
}
/// Which criterion to act on, asked for when the caller did not say.
///
/// A terminal gets the list and a prompt. Anything else gets the same list as an
/// error, which is what `resolve_ticket` does for an ambiguous match and for the same
/// reason: the opencode wrapper throws on the exit code and keeps stderr, so a list
/// printed to stdout would be discarded and an agent would learn nothing. Prompting
/// regardless would leave it blocked on a stdin that never closes.
fn ask_which_criterion(criteria: &[Criterion], title: &str) -> Result<usize> {
let listing = criteria_list(criteria);
if !std::io::stdin().is_terminal() {
return Err(anyhow!(
"Which criterion of '{}'?\n{}\n\nRe-run with the number, or a substring of the text.",
title,
listing
));
}
println!("Acceptance criteria of '{}':", color_text(title, Color::Green));
println!("{}", listing);
// Either form, since find_criteria takes both.
print!("Number or text: ");
std::io::stdout().flush()?;
let mut answer = String::new();
std::io::stdin().lock().read_line(&mut answer)?;
// An empty needle matches every criterion, so it would otherwise be reported as
// ambiguous rather than as nothing having been chosen.
if answer.trim().is_empty() {
return Err(anyhow!("No criterion chosen"));
}
let chosen = find_criteria(criteria, &answer);
match chosen.len() {
1 => Ok(chosen[0]),
0 => Err(anyhow!(
"'{}' matches none of the {} criteria",
answer.trim(),
criteria.len()
)),
_ => Err(anyhow!(
"'{}' matches more than one criterion, use the number",
answer.trim()
)),
}
}
pub fn cmd_check(args: &CheckArgs, checked: bool, start: &Path) -> Result<()> {
let worklane_dir = find_worklane_dir(start)?;
let (status, title, content) = resolve_ticket(&args.ticket, &worklane_dir)?;
let criteria = criteria(&content);
if criteria.is_empty() {
return Err(anyhow!("Ticket '{}' has no acceptance criteria", title));
}
let chosen = match &args.criterion {
None => ask_which_criterion(&criteria, &title)?,
Some(search) => {
let found = find_criteria(&criteria, search);
match found.len() {
1 => found[0],
0 if is_index(search) => {
return Err(anyhow!(
"'{}' is not one of the {} criteria of '{}':\n{}",
search.trim(),
criteria.len(),
title,
criteria_list(&criteria)
));
}
0 => {
return Err(anyhow!(
"No criterion of '{}' matches '{}'. Its criteria are:\n{}",
title,
search,
criteria_list(&criteria)
));
}
_ => {
return Err(anyhow!(
"'{}' matches {} criteria of '{}':\n{}\n\nUse the number instead.",
search,
found.len(),
title,
numbered_criteria(&criteria, &found)
));
}
}
}
};
let criterion = &criteria[chosen];
let verb = if checked { "checked" } else { "unchecked" };
if criterion.checked == checked {
println!(
"Already {}: {}",
verb,
color_text(&criterion.text, Color::Green)
);
return Ok(());
}
let updated = set_criterion(&content, criterion.line, checked);
let uuid = parse_ticket_field(&content, "ID");
save_ticket(&worklane_dir, &status, &uuid, &title, None, &updated)?;
println!(
"{} {}: {}",
if checked { "Checked" } else { "Unchecked" },
chosen + 1,
color_text(&criterion.text, Color::Green)
);
Ok(())
}
+114 -8
View File
@@ -3,6 +3,7 @@ use clap::Parser;
mod command;
mod handlers;
mod tui;
mod util;
use command::*;
@@ -36,8 +37,10 @@ fn main() -> Result<()> {
let start = std::env::current_dir()?;
match cli.command {
Command::Init => cmd_init(&start),
Command::Add {
// No subcommand opens the board, the way a bare `frig` does.
None | Some(Command::Tui) => run_tui(&start),
Some(Command::Init) => cmd_init(&start),
Some(Command::Add {
title,
description,
acceptance,
@@ -46,7 +49,7 @@ fn main() -> Result<()> {
due,
owner,
priority,
} => cmd_add(
}) => cmd_add(
&title,
&description,
&acceptance,
@@ -57,19 +60,122 @@ fn main() -> Result<()> {
priority,
&start,
),
Command::Ls { status, priority } => {
Some(Command::Ls { status, priority }) => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_ls(&status, priority, &worklane_dir)
}
Command::Show { id } => {
Some(Command::Show { id }) => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_show(&id, &worklane_dir)
}
Command::Mv {
Some(Command::Mv {
ticket,
status,
force,
} => cmd_mv(&ticket, &status, force, &start),
Command::Comment { ticket, body, owner } => cmd_comment(&ticket, &body, &owner, &start),
}) => cmd_mv(&ticket, &status, force, &start),
Some(Command::Set(args)) => cmd_set(&args, &start),
Some(Command::Append(args)) => cmd_append(&args, &start),
Some(Command::Check(args)) => cmd_check(&args, true, &start),
Some(Command::Uncheck(args)) => cmd_check(&args, false, &start),
Some(Command::Comment {
ticket,
body,
owner,
}) => cmd_comment(&ticket, &body, &owner, &start),
}
}
// ---------------------------------------------------------------------- tui --
/// Restore the terminal whatever happens.
///
/// A panic inside the draw loop with raw mode still on leaves the shell unusable and
/// the backtrace unreadable, so the hook runs before the default one.
fn install_panic_hook() {
let previous = std::panic::take_hook();
std::panic::set_hook(Box::new(move |info| {
let _ = restore_terminal();
previous(info);
}));
}
fn restore_terminal() -> std::io::Result<()> {
crossterm::terminal::disable_raw_mode()?;
crossterm::execute!(
std::io::stdout(),
crossterm::terminal::LeaveAlternateScreen
)
}
fn run_tui(start: &std::path::Path) -> Result<()> {
use crossterm::event::{self, Event, KeyCode, KeyEventKind, KeyModifiers};
use std::io::IsTerminal;
// The board is looked for before the terminal is, so running this outside a
// worklane directory gives the same message every other command gives rather than
// a complaint about the terminal.
let worklane_dir = find_worklane_dir(start)?;
// Without this, entering raw mode on a pipe fails with a bare "No such device or
// address (os error 6)", which says nothing about the actual mistake. A bare
// `worklane` is how the board is opened, so a script that reaches it by accident
// has to be pointed at a subcommand.
if !std::io::stdin().is_terminal() {
return Err(anyhow::anyhow!(
"`worklane` with no subcommand opens the board, which needs a terminal.\n\
For scripted use try `worklane ls` or `worklane show`; `worklane --help` \
lists everything."
));
}
let mut board = tui::Board::new(&worklane_dir)?;
install_panic_hook();
crossterm::terminal::enable_raw_mode()?;
crossterm::execute!(std::io::stdout(), crossterm::terminal::EnterAlternateScreen)?;
let mut terminal =
ratatui::Terminal::new(ratatui::backend::CrosstermBackend::new(std::io::stdout()))?;
let result = (|| -> Result<()> {
while !board.should_quit {
board.tick()?;
terminal.draw(|frame| tui::draw(frame, &board))?;
// Bounded, so the tick still runs when nobody is typing.
if !event::poll(tui::POLL)? {
continue;
}
let Event::Key(key) = event::read()? else {
continue;
};
if key.kind != KeyEventKind::Press {
continue;
}
match key.code {
KeyCode::Char('q') => board.should_quit = true,
KeyCode::Char('c') if key.modifiers.contains(KeyModifiers::CONTROL) => {
board.should_quit = true
}
// Esc closes the detail view, and only quits when there is nothing
// left to dismiss.
KeyCode::Esc => match board.detail {
Some(_) => board.toggle_detail(),
None => board.should_quit = true,
},
KeyCode::Enter | KeyCode::Char(' ') => board.toggle_detail(),
KeyCode::Left | KeyCode::Char('h') => board.select_column(-1),
KeyCode::Right | KeyCode::Char('l') => board.select_column(1),
KeyCode::Up | KeyCode::Char('k') => board.select_card(-1),
KeyCode::Down | KeyCode::Char('j') => board.select_card(1),
_ => {}
}
}
Ok(())
})();
// Before the error surfaces, so a failure does not leave the shell in raw mode.
restore_terminal()?;
result
}
+672
View File
@@ -0,0 +1,672 @@
//! The board as four columns, redrawn when the tree underneath it moves.
//!
//! Modelled on frig's TUI: event poll on a short timeout so timed work still runs when
//! nobody is typing, state refreshed on a tick, and the terminal restored whatever
//! happens.
//!
//! **Read only.** Moving a card by keypress is a follow-up. Everything here observes.
use std::collections::hash_map::DefaultHasher;
use std::hash::{Hash, Hasher};
use std::path::{Path, PathBuf};
use std::time::{Duration, SystemTime};
use anyhow::Result;
use ratatui::layout::{Constraint, Direction, Layout, Rect};
use ratatui::style::{Modifier, Style};
use ratatui::text::{Line, Span};
use ratatui::widgets::{Block, Borders, Clear, Paragraph, Wrap};
use ratatui::Frame;
use crate::handlers::read_comments;
use crate::util::*;
/// How long the event poll waits before letting the tick run.
pub const POLL: Duration = Duration::from_millis(250);
/// One status and the tickets in it.
pub struct Column {
pub status: &'static str,
pub tickets: Vec<TicketItem>,
}
/// What is on screen.
pub struct Board {
pub columns: Vec<Column>,
pub column: usize,
pub card: usize,
/// The body and comments of the selected ticket, when the detail view is open.
pub detail: Option<String>,
pub should_quit: bool,
worklane_dir: PathBuf,
digest: u64,
}
impl Board {
pub fn new(worklane_dir: &Path) -> Result<Self> {
let mut board = Board {
columns: Vec::new(),
column: 0,
card: 0,
detail: None,
should_quit: false,
worklane_dir: worklane_dir.to_path_buf(),
digest: 0,
};
board.reload()?;
Ok(board)
}
/// Re-read the tree only when the digest says it moved.
///
/// The scan is the expensive part, not the draw, so this is what the tick guards.
/// ratatui diffs its buffer, so drawing every iteration costs nothing.
pub fn tick(&mut self) -> Result<bool> {
let now = digest(&self.worklane_dir);
if now == self.digest {
return Ok(false);
}
self.reload()?;
Ok(true)
}
fn reload(&mut self) -> Result<()> {
self.columns = status_dirs()
.into_iter()
.map(|status| {
let path = self.worklane_dir.join(status);
// An absent or unreadable directory is an empty column, not a missing
// one: the four statuses are the shape of the board.
let tickets = collect_ticket_items(&path).unwrap_or_default();
Column { status, tickets }
})
.collect();
self.digest = digest(&self.worklane_dir);
self.clamp();
// The selected ticket may have moved or gone, so the open detail follows it.
if self.detail.is_some() {
self.detail = self.selected().map(detail_of);
}
Ok(())
}
/// Keep the selection on a card that exists, after the board changes under it.
fn clamp(&mut self) {
if self.columns.is_empty() {
self.column = 0;
self.card = 0;
return;
}
self.column = self.column.min(self.columns.len() - 1);
let count = self.columns[self.column].tickets.len();
self.card = match count {
0 => 0,
count => self.card.min(count - 1),
};
}
pub fn selected(&self) -> Option<&TicketItem> {
self.columns
.get(self.column)
.and_then(|column| column.tickets.get(self.card))
}
/// Move between columns, keeping the card index where it can land.
pub fn select_column(&mut self, delta: isize) {
if self.columns.is_empty() {
return;
}
let last = self.columns.len() as isize - 1;
let next = (self.column as isize + delta).clamp(0, last);
self.column = next as usize;
self.clamp();
self.refresh_detail();
}
pub fn select_card(&mut self, delta: isize) {
let count = match self.columns.get(self.column) {
Some(column) => column.tickets.len(),
None => return,
};
if count == 0 {
return;
}
let next = (self.card as isize + delta).clamp(0, count as isize - 1);
self.card = next as usize;
self.refresh_detail();
}
/// Open the detail view on the selected card, or close it if it is already open.
pub fn toggle_detail(&mut self) {
self.detail = match self.detail {
Some(_) => None,
None => self.selected().map(detail_of),
};
}
fn refresh_detail(&mut self) {
if self.detail.is_some() {
self.detail = self.selected().map(detail_of);
}
}
}
/// The whole ticket as plain text: the body as `show` renders it, then the comments.
///
/// Plain rather than coloured, since ratatui draws styled spans and an escape sequence
/// in a paragraph would be printed as literal bytes.
fn detail_of(ticket: &TicketItem) -> String {
let content = std::fs::read_to_string(&ticket.path).unwrap_or_default();
let mut out = content_trim(&content, false);
let uuid = parse_ticket_field(&content, "ID");
let comments = match ticket.path.parent().and_then(|status| status.parent()) {
Some(worklane_dir) => {
read_comments(&worklane_dir.join("comments").join(&uuid)).unwrap_or_default()
}
None => Vec::new(),
};
out.push('\n');
out.push_str(&format_comments_with(&comments, false));
out
}
/// A fingerprint of every ticket and comment file: name, length and modified time.
///
/// Names alone would miss a ticket edited in place, and a directory's own mtime only
/// moves on create and rename, so watching the directories would miss it too. Comment
/// files are included because a comment added elsewhere has to reach the detail view.
///
/// Cheap enough on a tree of tens of small files that it needs no new dependency. If it
/// ever stops being cheap, `notify` is the next step, and the reason belongs on the
/// ticket.
pub fn digest(worklane_dir: &Path) -> u64 {
let mut entries: Vec<(String, u64, Duration)> = Vec::new();
let mut visit = |dir: PathBuf| {
let Ok(read) = std::fs::read_dir(&dir) else {
return;
};
for entry in read.filter_map(|e| e.ok()) {
let path = entry.path();
if path.extension().is_none_or(|e| e != "md") {
continue;
}
let Ok(meta) = entry.metadata() else { continue };
let modified = meta
.modified()
.ok()
.and_then(|at| at.duration_since(SystemTime::UNIX_EPOCH).ok())
.unwrap_or_default();
entries.push((path.to_string_lossy().to_string(), meta.len(), modified));
}
};
for status in status_dirs() {
visit(worklane_dir.join(status));
}
// Comments live one level deeper, a directory per ticket.
let comments = worklane_dir.join("comments");
if let Ok(read) = std::fs::read_dir(&comments) {
for entry in read.filter_map(|e| e.ok()) {
visit(entry.path());
}
}
// Sorted, so a directory handing entries back in a different order is not a change.
entries.sort();
let mut hasher = DefaultHasher::new();
entries.hash(&mut hasher);
hasher.finish()
}
pub fn draw(frame: &mut Frame, board: &Board) {
let area = frame.area();
let rows = Layout::default()
.direction(Direction::Vertical)
.constraints([Constraint::Min(3), Constraint::Length(1)])
.split(area);
draw_columns(frame, board, rows[0]);
draw_footer(frame, board, rows[1]);
if let Some(detail) = &board.detail {
draw_detail(frame, detail, area);
}
}
fn draw_columns(frame: &mut Frame, board: &Board, area: Rect) {
let widths: Vec<Constraint> = board
.columns
.iter()
.map(|_| Constraint::Ratio(1, board.columns.len().max(1) as u32))
.collect();
let areas = Layout::default()
.direction(Direction::Horizontal)
.constraints(widths)
.split(area);
for (index, column) in board.columns.iter().enumerate() {
let focused = index == board.column;
let title = format!(" {} ({}) ", column.status, column.tickets.len());
let block = Block::default()
.borders(Borders::ALL)
.title(Span::styled(
title,
Style::default()
.fg(Color::Orange.into())
.add_modifier(if focused {
Modifier::BOLD
} else {
Modifier::empty()
}),
))
.border_style(Style::default().fg(if focused {
Color::Cyan.into()
} else {
Color::Grey.into()
}));
let mut lines: Vec<Line> = Vec::new();
for (card, ticket) in column.tickets.iter().enumerate() {
let selected = focused && card == board.card;
lines.extend(card_lines(ticket, selected));
}
// An empty status is an empty column, not a column that is not there.
frame.render_widget(Paragraph::new(lines).block(block), areas[index]);
}
}
/// One card: the priority mark and short id, the title, then owner and due.
fn card_lines(ticket: &TicketItem, selected: bool) -> Vec<Line<'static>> {
let (glyph, colour) = priority_mark(ticket.priority);
let emphasis = if selected {
Modifier::REVERSED
} else {
Modifier::empty()
};
vec![
Line::from(vec![
Span::styled(
glyph.to_string(),
Style::default().fg(colour.into()).add_modifier(emphasis),
),
Span::raw(" "),
Span::styled(
format!("({})", ticket.id),
Style::default()
.fg(Color::Red.into())
.add_modifier(emphasis),
),
]),
Line::from(Span::styled(
ticket.title.clone(),
Style::default().add_modifier(emphasis),
)),
Line::from(Span::styled(
format!("{} · {}", ticket.owner, ticket.due),
Style::default().fg(Color::Grey.into()),
)),
Line::from(""),
]
}
fn draw_footer(frame: &mut Frame, board: &Board, area: Rect) {
let keys = match board.detail {
Some(_) => " ↑↓ scroll enter close q quit ",
None => " ←→ column ↑↓ card enter detail q quit ",
};
frame.render_widget(
Paragraph::new(Span::styled(keys, Style::default().fg(Color::Grey.into()))),
area,
);
}
fn draw_detail(frame: &mut Frame, detail: &str, area: Rect) {
// Inset, so the board stays visible around the edges and the overlay reads as one.
let width = area.width.saturating_sub(area.width / 5).max(20);
let height = area.height.saturating_sub(area.height / 6).max(6);
let overlay = Rect {
x: area.x + (area.width.saturating_sub(width)) / 2,
y: area.y + (area.height.saturating_sub(height)) / 2,
width: width.min(area.width),
height: height.min(area.height),
};
let block = Block::default()
.borders(Borders::ALL)
.border_style(Style::default().fg(Color::Cyan.into()))
.title(Span::styled(
" ticket ",
Style::default().fg(Color::Orange.into()),
));
frame.render_widget(Clear, overlay);
frame.render_widget(
Paragraph::new(detail.to_string())
.block(block)
.wrap(Wrap { trim: false }),
overlay,
);
}
#[cfg(test)]
mod tests {
use super::*;
use ratatui::Terminal;
use ratatui::backend::TestBackend;
/// A board on disk, since everything here is about reading a real tree.
fn board_dir() -> PathBuf {
let dir = std::env::temp_dir().join(format!("worklane-tui-{}", uuid::Uuid::new_v4()));
for status in status_dirs() {
std::fs::create_dir_all(dir.join(status)).unwrap();
}
dir
}
fn write_ticket(dir: &Path, status: &str, uuid: &str, title: &str, extra: &str) -> PathBuf {
let path = dir.join(status).join(format!("{}_{}.md", uuid, slug(title)));
std::fs::write(
&path,
format!(
"# {title}\n\n## Description\nA description.\n\n## Acceptance Criteria\n\
- [ ] Crit one\n\n## Metadata\n\n- **ID**: {uuid}\n- **Priority**: 2\n\
- **Tags**: _None_\n- **Due**: 2026-12-31\n- **Owner**: alice\n\
- **Created At**: 2026-08-21 02:00:00\n- **Status**: {status}\n{extra}"
),
)
.unwrap();
path
}
/// The rendered buffer as lines of text, escapes and styling dropped.
fn render(board: &Board, width: u16, height: u16) -> Vec<String> {
let mut terminal = Terminal::new(TestBackend::new(width, height)).unwrap();
terminal.draw(|frame| draw(frame, board)).unwrap();
let buffer = terminal.backend().buffer().clone();
(0..buffer.area.height)
.map(|y| {
(0..buffer.area.width)
.map(|x| buffer[(x, y)].symbol())
.collect::<String>()
})
.collect()
}
#[test]
fn the_board_draws_the_four_statuses_as_columns() {
let dir = board_dir();
write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "First one", "");
write_ticket(&dir, "committed", "22222222-0000-4000-8000-000000000000", "Second one", "");
let board = Board::new(&dir).unwrap();
let screen = render(&board, 120, 20).join("\n");
for heading in ["backlog (1)", "committed (1)", "reviewing (0)", "done (0)"] {
assert!(screen.contains(heading), "no {heading:?} in:\n{screen}");
}
}
/// The card has to carry enough to identify the ticket without opening it.
#[test]
fn a_card_shows_the_short_id_title_owner_and_due() {
let dir = board_dir();
write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "First one", "");
let board = Board::new(&dir).unwrap();
let screen = render(&board, 120, 20).join("\n");
assert!(screen.contains("(1111111)"), "no short id in:\n{screen}");
assert!(screen.contains("First one"), "no title in:\n{screen}");
assert!(screen.contains("alice"), "no owner in:\n{screen}");
assert!(screen.contains("2026-12-31"), "no due date in:\n{screen}");
}
/// An empty status is a column with nothing in it, not a column that is missing.
#[test]
fn an_empty_status_renders_as_an_empty_column() {
let dir = board_dir();
let board = Board::new(&dir).unwrap();
assert_eq!(board.columns.len(), 4);
let screen = render(&board, 120, 20).join("\n");
for status in status_dirs() {
assert!(screen.contains(&format!("{status} (0)")), "{screen}");
}
}
/// Even with a status directory absent altogether, the board keeps its shape.
#[test]
fn a_missing_status_directory_is_still_a_column() {
let dir = board_dir();
std::fs::remove_dir_all(dir.join("done")).unwrap();
let board = Board::new(&dir).unwrap();
assert_eq!(board.columns.len(), 4);
assert!(render(&board, 120, 20).join("\n").contains("done (0)"));
}
#[test]
fn the_digest_is_stable_when_nothing_changes() {
let dir = board_dir();
write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "First one", "");
assert_eq!(digest(&dir), digest(&dir));
}
#[test]
fn the_digest_moves_when_a_ticket_is_created_or_moved() {
let dir = board_dir();
let before = digest(&dir);
let path = write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "First one", "");
let created = digest(&dir);
assert_ne!(before, created, "a new ticket went unnoticed");
let moved = dir.join("committed").join(path.file_name().unwrap());
std::fs::rename(&path, &moved).unwrap();
assert_ne!(created, digest(&dir), "a moved ticket went unnoticed");
std::fs::remove_file(&moved).unwrap();
assert_eq!(before, digest(&dir), "a deleted ticket left a trace");
}
/// The case a directory watch would miss: no create, no rename, only the body.
#[test]
fn the_digest_moves_when_a_ticket_is_edited_in_place() {
let dir = board_dir();
let path = write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "First one", "");
let before = digest(&dir);
let content = std::fs::read_to_string(&path).unwrap();
std::fs::write(&path, content.replace("A description.", "A longer description.")).unwrap();
assert_ne!(before, digest(&dir), "an in-place edit went unnoticed");
}
/// And the harder half of it: an edit that does not change the length either, so
/// only the modified time gives it away.
#[test]
fn the_digest_moves_on_an_edit_of_the_same_length() {
let dir = board_dir();
let path = write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "First one", "");
let content = std::fs::read_to_string(&path).unwrap();
let same_length = content.replace("A description.", "A descriptionA");
assert_eq!(content.len(), same_length.len(), "the fixture changed length");
std::fs::write(&path, &same_length).unwrap();
let before = digest(&dir);
// Stamped rather than slept on, so the test does not depend on how coarse the
// filesystem's timestamps are.
let file = std::fs::File::options().write(true).open(&path).unwrap();
file.set_modified(SystemTime::UNIX_EPOCH + Duration::from_secs(1_800_000_000))
.unwrap();
assert_ne!(before, digest(&dir), "a same-length edit went unnoticed");
}
/// A comment added elsewhere has to reach the detail view, so it counts as a change.
#[test]
fn the_digest_moves_when_a_comment_is_added() {
let dir = board_dir();
let uuid = "11111111-0000-4000-8000-000000000000";
write_ticket(&dir, "backlog", uuid, "First one", "");
let before = digest(&dir);
let comments = dir.join("comments").join(uuid);
std::fs::create_dir_all(&comments).unwrap();
std::fs::write(
comments.join("20260821_120000_000000.md"),
"**Comment**\nA note from elsewhere.\n\n**Author**: bob\n**Time**: 2026-08-21 12:00:00\n",
)
.unwrap();
assert_ne!(before, digest(&dir), "a new comment went unnoticed");
}
#[test]
fn navigation_moves_between_columns_and_cards() {
let dir = board_dir();
write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "Alpha", "");
write_ticket(&dir, "backlog", "22222222-0000-4000-8000-000000000000", "Beta", "");
write_ticket(&dir, "committed", "33333333-0000-4000-8000-000000000000", "Gamma", "");
let mut board = Board::new(&dir).unwrap();
assert_eq!(board.selected().map(|t| t.title.clone()), Some("Alpha".to_string()));
board.select_card(1);
assert_eq!(board.selected().map(|t| t.title.clone()), Some("Beta".to_string()));
// Clamped at both ends rather than wrapping
board.select_card(5);
assert_eq!(board.selected().map(|t| t.title.clone()), Some("Beta".to_string()));
board.select_card(-9);
assert_eq!(board.selected().map(|t| t.title.clone()), Some("Alpha".to_string()));
board.select_column(1);
assert_eq!(board.selected().map(|t| t.title.clone()), Some("Gamma".to_string()));
// reviewing is empty, so there is nothing selected there
board.select_column(1);
assert!(board.selected().is_none());
board.select_column(-9);
assert_eq!(board.column, 0);
}
/// Moving from a column with three cards to one with one must not leave the
/// selection pointing past the end.
#[test]
fn the_card_index_is_clamped_when_the_column_is_shorter() {
let dir = board_dir();
for (n, title) in [("11111111", "Alpha"), ("22222222", "Beta"), ("33333333", "Gamma")] {
write_ticket(&dir, "backlog", &format!("{n}-0000-4000-8000-000000000000"), title, "");
}
write_ticket(&dir, "committed", "44444444-0000-4000-8000-000000000000", "Delta", "");
let mut board = Board::new(&dir).unwrap();
board.select_card(2);
board.select_column(1);
assert_eq!(board.card, 0);
assert_eq!(board.selected().map(|t| t.title.clone()), Some("Delta".to_string()));
}
#[test]
fn the_detail_view_shows_the_body_and_the_comments() {
let dir = board_dir();
let uuid = "11111111-0000-4000-8000-000000000000";
write_ticket(&dir, "backlog", uuid, "First one", "");
let comments = dir.join("comments").join(uuid);
std::fs::create_dir_all(&comments).unwrap();
std::fs::write(
comments.join("20260821_120000_000000.md"),
"**Comment**\nA note from elsewhere.\n\n**Author**: bob\n**Time**: 2026-08-21 12:00:00\n",
)
.unwrap();
let mut board = Board::new(&dir).unwrap();
assert!(board.detail.is_none());
board.toggle_detail();
let detail = board.detail.clone().expect("no detail");
assert!(detail.contains("A description."), "{detail}");
assert!(detail.contains("Crit one"), "{detail}");
assert!(detail.contains("A note from elsewhere."), "{detail}");
assert!(detail.contains("bob"), "{detail}");
// Plain text, since ratatui would print an escape as literal bytes
assert!(!detail.contains('\x1b'), "escapes reached the detail view: {detail:?}");
board.toggle_detail();
assert!(board.detail.is_none());
}
/// A comment added while the detail view is open shows up on the next tick.
#[test]
fn a_tick_picks_up_a_comment_added_under_an_open_detail_view() {
let dir = board_dir();
let uuid = "11111111-0000-4000-8000-000000000000";
write_ticket(&dir, "backlog", uuid, "First one", "");
let mut board = Board::new(&dir).unwrap();
board.toggle_detail();
assert!(!board.detail.clone().unwrap().contains("A late note."));
let comments = dir.join("comments").join(uuid);
std::fs::create_dir_all(&comments).unwrap();
std::fs::write(
comments.join("20260821_120000_000000.md"),
"**Comment**\nA late note.\n\n**Author**: bob\n**Time**: 2026-08-21 12:00:00\n",
)
.unwrap();
assert!(board.tick().unwrap(), "the tick saw no change");
assert!(board.detail.clone().unwrap().contains("A late note."), "{:?}", board.detail);
}
#[test]
fn a_tick_with_nothing_changed_does_not_reload() {
let dir = board_dir();
write_ticket(&dir, "backlog", "11111111-0000-4000-8000-000000000000", "First one", "");
let mut board = Board::new(&dir).unwrap();
assert!(!board.tick().unwrap());
}
/// The board and the listing draw from the same palette, so a colour cannot exist
/// for one and not the other. The enum makes that a compile error; this pins the
/// mapping itself.
#[test]
fn the_priority_marks_use_the_shared_palette() {
for level in PRIORITY_RANGE {
let (_, colour) = priority_mark(Priority::Level(level));
let tui: ratatui::style::Color = colour.into();
assert_ne!(tui, ratatui::style::Color::Reset, "level {level} has no colour");
}
}
}
+621 -82
View File
@@ -52,24 +52,74 @@ pub fn should_use_colors() -> bool {
})
}
pub fn get_color(color: &str) -> &'static str {
match color {
"red" => "\x1b[31m",
"cyan" => "\x1b[36m",
"orange" => "\x1b[33m",
"green" => "\x1b[32m",
// Indexed colour 8 in the 256-colour form, which is byte for byte what
// crossterm emits for ratatui's Color::DarkGray, the grey frig and pantop
// use for dimmed rows. Neither SGR 90 nor 37 renders as grey on every
// palette: 90 leans on the bright-black slot and 37 can sit right on top
// of the default foreground.
"grey" => "\x1b[38;5;8m",
// Bold, per the guideline in AGENTS.md. Its absence meant colorize_line
// asked for a colour that did not exist and got an empty prefix.
"magenta" => "\x1b[1;35m",
// Indexed, for the same reason grey is: this is the spelling that renders.
"brightred" => "\x1b[38;5;9m",
_ => "",
/// The palette, as a type rather than a set of strings.
///
/// One definition for both renderers. The CLI needs an escape sequence and the TUI
/// needs a `ratatui::style::Color`, and an enum makes a colour that exists for one and
/// not the other a compile error instead of something a test has to go looking for.
/// The stringly-typed version needed exactly such a test, and a missing entry silently
/// produced an empty prefix, which is how `magenta` came to be undefined.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub enum Color {
Red,
Cyan,
Orange,
Green,
Grey,
Magenta,
BrightRed,
}
impl Color {
/// The SGR sequence the CLI writes.
pub fn ansi(self) -> &'static str {
match self {
Color::Red => "\x1b[31m",
Color::Cyan => "\x1b[36m",
Color::Orange => "\x1b[33m",
Color::Green => "\x1b[32m",
// Indexed colour 8 in the 256-colour form, which is byte for byte what
// crossterm emits for ratatui's Color::DarkGray, the grey frig and pantop
// use for dimmed rows. Neither SGR 90 nor 37 renders as grey on every
// palette: 90 leans on the bright-black slot and 37 can sit right on top
// of the default foreground.
Color::Grey => "\x1b[38;5;8m",
// Bold, per the guideline in AGENTS.md.
Color::Magenta => "\x1b[1;35m",
// Indexed, for the same reason grey is: this is the spelling that renders.
Color::BrightRed => "\x1b[38;5;9m",
}
}
/// Every colour in the palette, so a test can walk them without listing them.
pub const ALL: [Color; 7] = [
Color::Red,
Color::Cyan,
Color::Orange,
Color::Green,
Color::Grey,
Color::Magenta,
Color::BrightRed,
];
}
/// The same palette as ratatui sees it.
///
/// Chosen to match what crossterm emits for the escape above, so a card in the TUI and
/// a row in the listing are the same colour rather than two guesses at it.
impl From<Color> for ratatui::style::Color {
fn from(color: Color) -> Self {
use ratatui::style::Color as Tui;
match color {
Color::Red => Tui::Red,
Color::Cyan => Tui::Cyan,
Color::Orange => Tui::Yellow,
Color::Green => Tui::Green,
Color::Grey => Tui::DarkGray,
Color::Magenta => Tui::Magenta,
Color::BrightRed => Tui::LightRed,
}
}
}
@@ -77,15 +127,15 @@ pub fn get_color(color: &str) -> &'static str {
///
/// The seam matters for anything that aligns columns: a caller has to be able to
/// render both ways in one process to prove the padding does not depend on it.
pub fn paint(text: &str, color: &str, enabled: bool) -> String {
pub fn paint(text: &str, color: Color, enabled: bool) -> String {
if enabled {
format!("{}{}{}", get_color(color), text, "\x1b[0m")
format!("{}{}{}", color.ansi(), text, "\x1b[0m")
} else {
text.to_string()
}
}
pub fn color_text(text: &str, color: &str) -> String {
pub fn color_text(text: &str, color: Color) -> String {
paint(text, color, should_use_colors())
}
@@ -167,9 +217,9 @@ fn ambiguous(search: &str, matches: &[(String, String, String, String)]) -> anyh
message.push_str(&format!(
" {}. ({}) {} [{}]\n",
i + 1,
color_text(short_id(id), "red"),
color_text(short_id(id), Color::Red),
title,
color_text(status, "orange"),
color_text(status, Color::Orange),
));
}
@@ -177,11 +227,28 @@ fn ambiguous(search: &str, matches: &[(String, String, String, String)]) -> anyh
anyhow!(message)
}
pub fn resolve_ticket(search: &str, worklane_dir: &Path) -> Result<(String, String, String)> {
let statuses = status_dirs();
let mut matches: Vec<(String, String, String, String)> = Vec::new();
/// Shortest search tried as a UUID prefix. Below it the search is text, so a one or
/// two character term is a title search rather than a prefix matching half the board.
///
/// Four, not eight. The guard this replaces read `short_id.len() >= 8`, and `short_id`
/// there was always the full 36 character uuid, so it was always true and any length
/// already worked. Requiring eight would have broken the id the tool prints itself:
/// `ls` shows [`SHORT_ID_WIDTH`] characters, and pasting that back has to resolve.
pub const MIN_ID_SEARCH: usize = 4;
for status in &statuses {
pub fn resolve_ticket(search: &str, worklane_dir: &Path) -> Result<(String, String, String)> {
let search_lower = search.to_lowercase();
let long_enough_for_an_id = search.chars().count() >= MIN_ID_SEARCH;
// Three tiers, filled in one pass and consulted in order. A uuid prefix has to win
// outright rather than join a flat list: ticket titles reference other tickets by
// id, so an exact prefix match was reported as ambiguous against whichever title
// happened to mention it.
let mut by_id: Vec<(String, String, String, String)> = Vec::new();
let mut by_title: Vec<(String, String, String, String)> = Vec::new();
let mut by_filename: Vec<(String, String, String, String)> = Vec::new();
for status in status_dirs() {
let status_path = worklane_dir.join(status);
if !status_path.exists() {
continue;
@@ -206,23 +273,34 @@ pub fn resolve_ticket(search: &str, worklane_dir: &Path) -> Result<(String, Stri
.file_stem()
.map(|s| s.to_string_lossy().to_string())
.unwrap_or_default();
let short_id = filename.split('_').next().unwrap_or("");
let uuid = filename.split('_').next().unwrap_or("");
let search_lower = search.to_lowercase();
let title_lower = title.to_lowercase();
let filename_lower = filename.to_lowercase();
let by_prefix = long_enough_for_an_id && uuid.to_lowercase().starts_with(&search_lower);
let in_title = title.to_lowercase().contains(&search_lower);
// Still reaches the middle of a uuid, which the prefix tier cannot.
let in_filename = filename.to_lowercase().contains(&search_lower);
let id_match =
short_id.to_lowercase().starts_with(&search_lower) && short_id.len() >= 8;
let title_match = title_lower.contains(&search_lower);
let filename_match = filename_lower.contains(&search_lower);
if !(by_prefix || in_title || in_filename) {
continue;
}
if id_match || title_match || filename_match {
matches.push((status.to_string(), title, content, short_id.to_string()));
let found = (status.to_string(), title, content, uuid.to_string());
if by_prefix {
by_id.push(found);
} else if in_title {
by_title.push(found);
} else {
by_filename.push(found);
}
}
}
let mut matches = match (by_id.is_empty(), by_title.is_empty()) {
(false, _) => by_id,
(true, false) => by_title,
(true, true) => by_filename,
};
if matches.is_empty() {
return Err(anyhow!("No ticket found matching '{}'", search));
}
@@ -235,18 +313,26 @@ pub fn resolve_ticket(search: &str, worklane_dir: &Path) -> Result<(String, Stri
Ok((status, title, content))
}
pub fn format_comments(comments: &[(String, String, String, String)]) -> String {
format_comments_with(comments, should_use_colors())
}
/// As above, with the colour decision passed in for the TUI.
pub fn format_comments_with(
comments: &[(String, String, String, String)],
colored: bool,
) -> String {
if comments.is_empty() {
return color_text("No comments yet.", "grey");
return paint("No comments yet.", Color::Grey, colored);
}
let mut result = String::new();
result.push_str("\n");
result.push_str(&color_text("COMMENTS", "orange"));
result.push_str(&paint("COMMENTS", Color::Orange, colored));
result.push_str(&format!("\n{}\n", "─".repeat(20)));
for (_filename, author, time, body) in comments {
result.push_str("\n");
result.push_str(&color_text(&format!("From {} ({})", author, time), "cyan"));
result.push_str(&paint(&format!("From {} ({})", author, time), Color::Cyan, colored));
result.push_str("\n");
if !body.is_empty() {
result.push_str(&" ".to_string());
@@ -258,10 +344,18 @@ pub fn format_comments(comments: &[(String, String, String, String)]) -> String
result
}
pub fn content_trim_colored(content: &str) -> String {
content_trim(content, should_use_colors())
}
/// The ticket body rendered for display, with the colour decision passed in.
///
/// The TUI needs the plain form: ratatui draws styled spans, and an escape sequence
/// embedded in a paragraph would be printed as literal bytes.
pub fn content_trim(content: &str, colored: bool) -> String {
let lines: Vec<&str> = content.trim().lines().collect();
let colored = should_use_colors();
let mut result = String::new();
let mut current_section = "";
let mut criterion = 0;
let mut i = 0;
while i < lines.len() {
@@ -270,7 +364,7 @@ pub fn content_trim_colored(content: &str) -> String {
// Track current section
if let Some(section_name) = line.strip_prefix("## ") {
current_section = line;
result.push_str(&paint(section_name, "orange", colored));
result.push_str(&paint(section_name, Color::Orange, colored));
result.push('\n');
// Measured on the name as displayed, in characters. The rule used to span
// the raw line, so it ran three past the heading for the "## ", and byte
@@ -314,10 +408,22 @@ pub fn content_trim_colored(content: &str) -> String {
continue;
}
// Acceptance Criteria checkboxes
if line.starts_with("- [ ]") {
result.push_str(&paint("- [ ]", "grey", colored));
result.push_str(&line[5..]);
// Acceptance Criteria checkboxes, numbered so the index `check` takes is
// visible where the ticket is read. The number replaces the list marker
// rather than joining it, and is cyan like the numbers in the plan section.
if current_section == ACCEPTANCE.heading
&& let Some((checked, text)) = checkbox(line)
{
criterion += 1;
result.push_str(&paint(&format!("{}.", criterion), Color::Cyan, colored));
result.push(' ');
result.push_str(&paint(
if checked { "[x]" } else { "[ ]" },
Color::Grey,
colored,
));
result.push(' ');
result.push_str(&colorize_bold(text, colored));
result.push('\n');
continue;
}
@@ -330,7 +436,7 @@ pub fn content_trim_colored(content: &str) -> String {
let link_start = start + end_bracket + 1;
if let Some(end) = line[link_start..].find(']') {
let absolute_end = link_start + end + 1;
result.push_str(&color_text(&line[start..absolute_end], "cyan"));
result.push_str(&paint(&line[start..absolute_end], Color::Cyan, colored));
result.push('\n');
continue;
}
@@ -339,7 +445,7 @@ pub fn content_trim_colored(content: &str) -> String {
}
// Regular content - colorize **bold** in magenta
result.push_str(&colorize_line(line));
result.push_str(&colorize_bold(line, colored));
result.push('\n');
}
@@ -360,7 +466,7 @@ pub fn colorize_ordered(line: &str) -> String {
// still scanning digits
} else if *c == '.' && i + 1 < chars.len() && chars[i + 1] == ' ' {
let number = &line[..i + 1];
result.push_str(&color_text(number, "cyan"));
result.push_str(&color_text(number, Color::Cyan));
result.push_str(&line[i + 1..]);
return result;
} else {
@@ -409,7 +515,7 @@ fn metadata_value_cell(name: &str, value: &str, colored: bool) -> String {
}
if is_unknown_value(value) {
return paint(value, "grey", colored);
return paint(value, Color::Grey, colored);
}
value.to_string()
@@ -445,7 +551,7 @@ fn render_metadata_table(lines: &[&str], colored: bool) -> String {
for row in &rows {
match row {
MetadataRow::Field { name, value } => {
result.push_str(&paint(name, "red", colored));
result.push_str(&paint(name, Color::Red, colored));
result.push_str(&" ".repeat(field_width - name.chars().count()));
result.push_str(METADATA_GUTTER);
result.push_str(&metadata_value_cell(name, value, colored));
@@ -492,7 +598,7 @@ fn colorize_bold(line: &str, enabled: bool) -> String {
match (i + 2..chars.len()).find(|&at| is_delimiter(&chars, at)) {
Some(close) => {
let bold: String = chars[i + 2..close].iter().collect();
result.push_str(&color_text(&bold, "magenta"));
result.push_str(&color_text(&bold, Color::Magenta));
i = close + 2;
}
// Unterminated: the rest is literal. The old scan walked off the end
@@ -550,12 +656,20 @@ fn is_status_line(line: &str) -> bool {
body.starts_with("**Status**:") || body.starts_with("**-Status**:")
}
// Rewrite the Status field in the Metadata section, leaving every other line untouched.
//
// Scoped to the section for the same reason as parse_ticket_field: a description line
// shaped like the Status field would otherwise be rewritten in its place, corrupting
// the prose and leaving the real metadata stale.
pub fn set_status_field(content: &str, target_status: &str, title: &str) -> Result<String> {
/// Rewrite one field in the Metadata section, leaving every other line untouched.
///
/// Scoped to the section for the same reason as `parse_ticket_field`: a description
/// line shaped like a metadata field would otherwise be rewritten in its place,
/// corrupting the prose and leaving the real metadata stale.
///
/// The matcher is a parameter because Status has a legacy spelling to repair, which no
/// other field has.
fn set_metadata_line(
content: &str,
field: &str,
value: &str,
matches: impl Fn(&str) -> bool,
) -> Option<String> {
let mut updated = String::with_capacity(content.len());
let mut in_metadata = false;
let mut found = false;
@@ -565,9 +679,62 @@ pub fn set_status_field(content: &str, target_status: &str, title: &str) -> Resu
in_metadata = is_metadata_heading(line);
}
if in_metadata && !found && is_status_line(line) {
updated.push_str("- **Status**: ");
updated.push_str(target_status);
if in_metadata && !found && matches(line) {
updated.push_str("- **");
updated.push_str(field);
updated.push_str("**: ");
updated.push_str(value);
found = true;
} else {
updated.push_str(line);
}
updated.push('\n');
}
if found { Some(updated) } else { None }
}
pub fn set_status_field(content: &str, target_status: &str, title: &str) -> Result<String> {
set_metadata_line(content, "Status", target_status, is_status_line).ok_or_else(|| {
anyhow!(
"Ticket '{}' has no Status field in its Metadata section",
title
)
})
}
/// Rewrite a metadata field other than Status.
///
/// A field that is not already in the file is an error rather than an insertion. Every
/// ticket `add` writes carries the full set in a fixed order, and nothing else writes
/// these files, so a missing field means a hand-made ticket and guessing where the line
/// belongs would be inventing a format.
pub fn set_metadata_field(content: &str, field: &str, value: &str, title: &str) -> Result<String> {
let prefix = format!("**{}**:", field);
set_metadata_line(content, field, value, |line| {
metadata_field_body(line).starts_with(&prefix)
})
.ok_or_else(|| {
anyhow!(
"Ticket '{}' has no {} field in its Metadata section",
title,
field
)
})
}
/// Rewrite the title heading, the first `# ` line in the file.
///
/// `## ` headings do not match: the second character has to be a space.
pub fn set_title(content: &str, title: &str) -> Result<String> {
let mut updated = String::with_capacity(content.len());
let mut found = false;
for line in content.lines() {
if !found && line.starts_with("# ") {
updated.push_str("# ");
updated.push_str(title);
found = true;
} else {
updated.push_str(line);
@@ -576,10 +743,7 @@ pub fn set_status_field(content: &str, target_status: &str, title: &str) -> Resu
}
if !found {
return Err(anyhow!(
"Ticket '{}' has no Status field in its Metadata section",
title
));
return Err(anyhow!("Ticket '{}' has no title heading", title));
}
Ok(updated)
@@ -597,6 +761,337 @@ pub fn format_created_at(created_at: &str) -> String {
}
}
/// How a section stores the lines the tool owns.
pub enum SectionKind {
/// Lines as written, a blank one acting as a paragraph break.
Prose,
/// One `- [ ] ` item per line.
Checklist,
/// One `N. ` step per line.
Numbered,
}
/// A section of a ticket whose body `set` and `append` can rewrite.
///
/// A table rather than a match arm per section, so adding a section later is one entry
/// here instead of edits spread across both commands.
pub struct Section {
pub heading: &'static str,
/// How the section is named in output, lowercase so it reads the same way the
/// metadata field labels do.
pub label: &'static str,
/// What `add` writes when the section is left empty. Treated as no content, so
/// appending to an empty section replaces the placeholder rather than following it.
pub placeholder: &'static str,
pub kind: SectionKind,
}
pub const DESCRIPTION: Section = Section {
heading: "## Description",
label: "description",
placeholder: "_No description provided._",
kind: SectionKind::Prose,
};
pub const ACCEPTANCE: Section = Section {
heading: "## Acceptance Criteria",
label: "acceptance criteria",
placeholder: "_No acceptance criteria provided._",
kind: SectionKind::Checklist,
};
pub const PLAN: Section = Section {
heading: "## Implementation Plan",
label: "implementation plan",
placeholder: "_No implementation plan provided._",
kind: SectionKind::Numbered,
};
impl Section {
/// The values a caller supplied, reduced to the lines that belong in the body.
///
/// Prose keeps interior blanks, since those are paragraph breaks. A list has one
/// item per value, so a blank there is nothing at all.
pub fn normalise(&self, values: &[String]) -> Vec<String> {
match self.kind {
SectionKind::Prose => trim_blank_ends(values).to_vec(),
SectionKind::Checklist | SectionKind::Numbered => values
.iter()
.filter(|value| !value.trim().is_empty())
.cloned()
.collect(),
}
}
/// `items` as body lines, numbering from `first` where the section is numbered.
fn render(&self, items: &[String], first: usize) -> Vec<String> {
match self.kind {
SectionKind::Prose => items.to_vec(),
SectionKind::Checklist => items.iter().map(|i| format!("- [ ] {}", i)).collect(),
SectionKind::Numbered => items
.iter()
.enumerate()
.map(|(offset, step)| format!("{}. {}", first + offset, step))
.collect(),
}
}
}
/// Whether the line opens with `N. `, the shape a numbered step is stored in.
fn is_numbered_item(line: &str) -> bool {
let digits = line.chars().take_while(|c| c.is_ascii_digit()).count();
// ASCII digits are one byte each, so the count is also the byte offset.
digits > 0 && line[digits..].starts_with(". ")
}
/// The lines of a section's body, excluding the heading, running to the next `## `
/// heading or the end of the file.
fn section_body(lines: &[&str], heading: &str) -> Option<std::ops::Range<usize>> {
let at = lines.iter().position(|line| line.trim_end() == heading)?;
let after = at + 1;
let end = lines[after..]
.iter()
.position(|line| line.starts_with("## "))
.map_or(lines.len(), |offset| after + offset);
Some(after..end)
}
/// Where the body's content ends, ignoring the blank lines that separate it from
/// whatever follows.
fn body_content_end(lines: &[&str], body: &std::ops::Range<usize>) -> usize {
let mut end = body.end;
while end > body.start && lines[end - 1].trim().is_empty() {
end -= 1;
}
end
}
fn join_lines(lines: &[String]) -> String {
let mut out = lines.join("\n");
out.push('\n');
out
}
/// Replace a section's body with `items`, leaving every line outside it untouched.
pub fn set_section_body(content: &str, section: &Section, items: &[String]) -> Result<String> {
let lines: Vec<&str> = content.lines().collect();
let body = section_body(&lines, section.heading)
.ok_or_else(|| anyhow!("Ticket has no {} section", section.label))?;
let mut out: Vec<String> = lines[..body.start].iter().map(|l| l.to_string()).collect();
out.extend(section.render(items, 1));
// One blank line before whatever section follows, matching how `add` writes it.
if body.end < lines.len() {
out.push(String::new());
}
out.extend(lines[body.end..].iter().map(|l| l.to_string()));
Ok(join_lines(&out))
}
/// Add `items` to the end of a section's body.
///
/// Prose gains a blank line first, so the addition reads as a new paragraph. A numbered
/// section continues from the count of steps already there rather than renumbering what
/// is above it, which keeps any handwritten line in the section exactly as it was.
pub fn append_section_body(content: &str, section: &Section, items: &[String]) -> Result<String> {
let lines: Vec<&str> = content.lines().collect();
let body = section_body(&lines, section.heading)
.ok_or_else(|| anyhow!("Ticket has no {} section", section.label))?;
let at = body_content_end(&lines, &body);
let existing: Vec<&&str> = lines[body.start..at]
.iter()
.filter(|line| !line.trim().is_empty())
.collect();
// An empty section is a placeholder, and following it with a paragraph would leave
// "_No description provided._" above the description.
if existing.len() == 1 && existing[0].trim() == section.placeholder {
return set_section_body(content, section, items);
}
let first = match section.kind {
SectionKind::Numbered => 1 + existing.iter().filter(|l| is_numbered_item(l)).count(),
_ => 1,
};
let mut out: Vec<String> = lines[..at].iter().map(|l| l.to_string()).collect();
if matches!(section.kind, SectionKind::Prose) && at > body.start {
out.push(String::new());
}
out.extend(section.render(items, first));
out.extend(lines[at..].iter().map(|l| l.to_string()));
Ok(join_lines(&out))
}
/// One acceptance criterion as it sits in the file.
pub struct Criterion {
/// Index into `content.lines()`, so the one line can be rewritten in place.
pub line: usize,
pub checked: bool,
pub text: String,
}
/// A checkbox line's state and text, or `None` when the line is not one.
///
/// Both `[x]` and `[X]` count as ticked. Anything else between the brackets is not a
/// criterion, so a handwritten line in the section is left out of the numbering.
pub fn checkbox(line: &str) -> Option<(bool, &str)> {
let rest = line.trim_start().strip_prefix("- [")?;
let mut chars = rest.char_indices();
let (_, mark) = chars.next()?;
let (closes_at, close) = chars.next()?;
if close != ']' {
return None;
}
let checked = match mark {
' ' => false,
'x' | 'X' => true,
_ => return None,
};
Some((checked, rest[closes_at + 1..].trim()))
}
/// The acceptance criteria, numbered in the order they appear.
///
/// Scoped to the section, so a checkbox written into a description is not a criterion,
/// and non-checkbox lines inside the section are skipped rather than numbered.
pub fn criteria(content: &str) -> Vec<Criterion> {
let lines: Vec<&str> = content.lines().collect();
let Some(body) = section_body(&lines, ACCEPTANCE.heading) else {
return Vec::new();
};
lines[body.clone()]
.iter()
.enumerate()
.filter_map(|(offset, line)| {
checkbox(line).map(|(checked, text)| Criterion {
line: body.start + offset,
checked,
text: text.to_string(),
})
})
.collect()
}
/// The criteria at `shown`, numbered by their real position in the list.
///
/// The position matters: a subset renumbered from one would contradict the advice to
/// use the number, pointing at whichever criterion happens to sit there instead.
pub fn numbered_criteria(criteria: &[Criterion], shown: &[usize]) -> String {
let colored = should_use_colors();
shown
.iter()
.filter_map(|offset| criteria.get(*offset).map(|criterion| (offset, criterion)))
.map(|(offset, criterion)| {
format!(
" {} {} {}",
paint(&format!("{}.", offset + 1), Color::Cyan, colored),
paint(
if criterion.checked { "[x]" } else { "[ ]" },
Color::Grey,
colored
),
criterion.text
)
})
.collect::<Vec<_>>()
.join("\n")
}
/// The whole list, numbered as `show` numbers it.
pub fn criteria_list(criteria: &[Criterion]) -> String {
numbered_criteria(criteria, &(0..criteria.len()).collect::<Vec<_>>())
}
/// Whether `search` is a number rather than a substring, so a value out of range can
/// be reported as a bad index instead of a fruitless text search.
pub fn is_index(search: &str) -> bool {
search.trim().parse::<usize>().is_ok()
}
/// Which criterion `search` names: a one-based index as `show` prints, or a
/// case-insensitive substring of the text.
///
/// The index is tried first, so a criterion whose text is literally "2" is reachable
/// only by substring. Returns every match, leaving the caller to refuse more than one.
pub fn find_criteria(criteria: &[Criterion], search: &str) -> Vec<usize> {
if let Ok(index) = search.trim().parse::<usize>() {
if index >= 1 && index <= criteria.len() {
return vec![index - 1];
}
// A number outside the range is a bad index, not a substring to hunt for.
return Vec::new();
}
// Trimmed, like the index path: an answer typed at the prompt arrives with its
// newline attached, and no criterion text contains one.
let needle = search.trim().to_lowercase();
criteria
.iter()
.enumerate()
.filter(|(_, criterion)| criterion.text.to_lowercase().contains(&needle))
.map(|(offset, _)| offset)
.collect()
}
/// Tick or untick the criterion on `line`, leaving every other byte alone.
///
/// Only the character between the brackets is spliced. Rebuilding the line would
/// normalise its indentation and whatever spacing it carried after the checkbox.
pub fn set_criterion(content: &str, line: usize, checked: bool) -> String {
let mark = if checked { 'x' } else { ' ' };
let mut out = String::with_capacity(content.len());
for (index, current) in content.lines().enumerate() {
match (index == line, current.find("- [")) {
(true, Some(at)) => {
let opens = at + "- [".len();
out.push_str(&current[..opens]);
out.push(mark);
// Past the one character the brackets hold. Nothing follows on a line
// that ends mid-checkbox, which is why this is not unconditional.
if let Some((offset, _)) = current[opens..].char_indices().nth(1) {
out.push_str(&current[opens + offset..]);
}
}
_ => out.push_str(current),
}
out.push('\n');
}
out
}
/// The slice with blank values trimmed from both ends, interior ones kept.
///
/// Description values are joined with a single newline, so an empty value is how a
/// caller spells a paragraph break. That makes the interior blanks content, while a
/// blank at either end would only open or close the section with a gap.
pub fn trim_blank_ends(values: &[String]) -> &[String] {
let first = values.iter().position(|v| !v.trim().is_empty());
match first {
None => &[],
Some(first) => {
// Guaranteed to find one, since `first` is itself non-blank.
let last = match values.iter().rposition(|v| !v.trim().is_empty()) {
Some(last) => last,
None => first,
};
&values[first..=last]
}
}
}
pub fn status_dirs() -> Vec<&'static str> {
vec!["backlog", "committed", "reviewing", "done"]
}
@@ -653,6 +1148,9 @@ pub struct TicketItem {
pub id: String,
pub created: String,
pub priority: Priority,
/// The file this came from. The listing ignores it; the TUI opens it for the
/// detail view rather than resolving the ticket a second time.
pub path: std::path::PathBuf,
}
/// Grey for a value that is not set, per the colour guideline.
@@ -661,7 +1159,7 @@ pub struct TicketItem {
/// place that ignored the rule.
fn dim_if_unset(value: &str, colored: bool) -> String {
if is_unknown_value(value) {
paint(value, "grey", colored)
paint(value, Color::Grey, colored)
} else {
value.to_string()
}
@@ -682,17 +1180,17 @@ fn dim_if_unset(value: &str, colored: bool) -> String {
/// The number counts up while the mark empties out, because 1 is the most urgent.
/// That is the convention every tracker uses and what the p1 tags this replaced
/// already meant.
pub fn priority_mark(priority: Priority) -> (&'static str, &'static str) {
pub fn priority_mark(priority: Priority) -> (&'static str, Color) {
match priority {
Priority::Level(1) => ("\u{25cf}\u{25cf}", "brightred"),
Priority::Level(2) => ("\u{25cf}\u{25d0}", "red"),
Priority::Level(3) => ("\u{25cf}\u{25cb}", "orange"),
Priority::Level(4) => ("\u{25d0}\u{25cb}", "cyan"),
Priority::Level(5) => ("\u{25cb}\u{25cb}", "grey"),
Priority::Level(1) => ("\u{25cf}\u{25cf}", Color::BrightRed),
Priority::Level(2) => ("\u{25cf}\u{25d0}", Color::Red),
Priority::Level(3) => ("\u{25cf}\u{25cb}", Color::Orange),
Priority::Level(4) => ("\u{25d0}\u{25cb}", Color::Cyan),
Priority::Level(5) => ("\u{25cb}\u{25cb}", Color::Grey),
// Unreachable while Level is only built by parse_priority, which checks
// the range, but a level added later should not silently render blank.
Priority::Level(_) | Priority::Invalid => ("??", "brightred"),
Priority::Unset => ("\u{b7}\u{b7}", "grey"),
Priority::Level(_) | Priority::Invalid => ("??", Color::BrightRed),
Priority::Unset => ("\u{b7}\u{b7}", Color::Grey),
}
}
@@ -719,7 +1217,7 @@ pub fn display_ticket_items(items: &[TicketItem]) {
let colored = should_use_colors();
for item in items {
let id = paint(&item.id, "red", colored);
let id = paint(&item.id, Color::Red, colored);
let owner = dim_if_unset(&item.owner, colored);
let due = dim_if_unset(&item.due, colored);
let priority = show_priority(item.priority, colored);
@@ -730,7 +1228,7 @@ pub fn display_ticket_items(items: &[TicketItem]) {
priority, id, item.title, owner, due
);
} else {
let created = paint(&item.created, "cyan", colored);
let created = paint(&item.created, Color::Cyan, colored);
println!(
" {} {} ({}) {} | Owner: {} | Due: {}",
priority, created, id, item.title, owner, due
@@ -763,6 +1261,7 @@ pub fn collect_ticket_items(status_path: impl AsRef<Path>) -> Result<Vec<TicketI
id: short_id(&filename).to_string(),
created: format_created_at(&created_at),
priority: parse_priority(&content),
path: e.path(),
})
})
.collect();
@@ -817,7 +1316,7 @@ mod tests {
for unset in ["_Not set_", "_None_"] {
assert!(is_unknown_value(unset), "{unset} should count as unset");
assert_eq!(dim_if_unset(unset, false), unset);
assert_eq!(dim_if_unset(unset, true), paint(unset, "grey", true));
assert_eq!(dim_if_unset(unset, true), paint(unset, Color::Grey, true));
}
for set in ["alice", "2026-12-31", "bug,frontend"] {
@@ -1087,6 +1586,34 @@ mod tests {
assert!(rendered.ends_with("after\n"), "{rendered:?}");
}
#[test]
fn blank_values_are_trimmed_from_the_ends_but_kept_inside() {
let owned = |values: &[&str]| -> Vec<String> {
values.iter().map(|v| v.to_string()).collect()
};
// A break between paragraphs is content
let two_paragraphs = owned(&["First.", "", "Second."]);
assert_eq!(trim_blank_ends(&two_paragraphs), two_paragraphs.as_slice());
// A run of them is kept verbatim rather than collapsed
let wide = owned(&["A", "", "", "B"]);
assert_eq!(trim_blank_ends(&wide), wide.as_slice());
// The ends are not
assert_eq!(
trim_blank_ends(&owned(&["", " ", "Only.", "", ""])),
owned(&["Only."]).as_slice()
);
// Nothing but blanks is nothing at all
assert!(trim_blank_ends(&owned(&["", " ", ""])).is_empty());
assert!(trim_blank_ends(&[]).is_empty());
// A single value survives either way
assert_eq!(trim_blank_ends(&owned(&["One."])), owned(&["One."]).as_slice());
}
#[test]
fn a_level_in_range_parses() {
for level in 1..=5u8 {
@@ -1232,15 +1759,27 @@ mod tests {
#[test]
fn the_ramp_avoids_green() {
for level in PRIORITY_RANGE {
assert_ne!(priority_mark(Priority::Level(level)).1, "green");
assert_ne!(priority_mark(Priority::Level(level)).1, Color::Green);
}
}
#[test]
fn every_colour_the_code_asks_for_exists() {
for colour in ["red", "cyan", "orange", "green", "grey", "magenta", "brightred"] {
assert!(!get_color(colour).is_empty(), "{colour} is not defined");
fn every_colour_has_an_escape_and_a_ratatui_equivalent() {
// The old version of this test guarded against a name with no entry, which the
// enum now makes a compile error. What is left worth asserting is that no
// variant renders as nothing, and that the two renderers agree on the set.
let mut seen = std::collections::HashSet::new();
for colour in Color::ALL {
assert!(!colour.ansi().is_empty(), "{colour:?} has no escape");
assert!(
colour.ansi().starts_with("\x1b["),
"{colour:?} is not an SGR sequence"
);
assert!(seen.insert(ratatui::style::Color::from(colour)), "{colour:?} shares its ratatui colour");
}
assert_eq!(seen.len(), Color::ALL.len());
}
/// Pinned deliberately. Both SGR spellings of grey failed on a real palette,
@@ -1249,7 +1788,7 @@ mod tests {
/// so worklane's grey is the one frig and pantop already render.
#[test]
fn grey_matches_the_indexed_colour_frig_uses() {
assert_eq!(get_color("grey"), "\x1b[38;5;8m");
assert_eq!(Color::Grey.ansi(), "\x1b[38;5;8m");
}
/// With no colour to carry the emphasis, the markers are the emphasis.
+77
View File
@@ -380,3 +380,80 @@ fn only_ticket(worklane: &PathBuf) -> String {
assert_eq!(files.len(), 1, "expected exactly one ticket");
fs::read_to_string(files[0].path()).unwrap()
}
/// The contract the opencode wrapper relies on: values are joined with a single
/// newline, so an empty value is how a paragraph break is spelled. The wrapper used
/// to drop those blanks, collapsing every multi paragraph description into one.
#[test]
fn add_keeps_a_paragraph_break_in_the_description() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["add", "--title", "Two Paras"])
.args(["--description", "First paragraph."])
.args(["--description", ""])
.args(["--description", "Second paragraph."])
.assert()
.success();
let content = only_ticket(&worklane);
assert!(
content.contains("## Description\nFirst paragraph.\n\nSecond paragraph.\n"),
"was {content:?}"
);
// And it survives the round trip back out
let mut show = Command::cargo_bin(BIN_NAME).unwrap();
show.current_dir(&temp.path()).args(["show", "Two Paras"]);
let stdout = String::from_utf8(show.assert().success().get_output().stdout.clone()).unwrap();
assert!(
stdout.contains("First paragraph.\n\nSecond paragraph."),
"was {stdout:?}"
);
}
/// A break belongs between paragraphs, not against the section headings.
#[test]
fn add_discards_blank_descriptions_at_either_end() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["add", "--title", "Padded"])
.args(["--description", ""])
.args(["--description", " "])
.args(["--description", "The only line."])
.args(["--description", ""])
.assert()
.success();
let content = only_ticket(&worklane);
assert!(
content.contains("## Description\nThe only line.\n\n## Acceptance Criteria"),
"was {content:?}"
);
}
/// Nothing but blanks is no description, not an empty section.
#[test]
fn add_treats_an_all_blank_description_as_none() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["add", "--title", "Blank"])
.args(["--description", ""])
.args(["--description", " "])
.assert()
.success();
let content = only_ticket(&worklane);
assert!(
content.contains("## Description\n_No description provided._"),
"was {content:?}"
);
}
+287
View File
@@ -0,0 +1,287 @@
use assert_cmd::Command;
use assert_fs::TempDir;
use assert_fs::fixture::{PathChild, PathCreateDir};
use std::fs;
use std::path::PathBuf;
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
const UUID: &str = "475534a3-8a0d-45cb-9a97-39c251dd8e39";
fn setup_worklane(temp: &TempDir) -> PathBuf {
let worklane = temp.child(".worklane");
worklane.create_dir_all().unwrap();
for dir in ["backlog", "committed", "reviewing", "done"] {
worklane.child(dir).create_dir_all().unwrap();
}
worklane.path().to_path_buf()
}
/// One criterion already ticked, one handwritten line inside the section, and a
/// checkbox in the description that must not be counted as a criterion.
fn create_ticket(worklane: &PathBuf) {
// Written without line continuations on purpose: a trailing `\` strips the next
// line's leading whitespace, so the indented line would arrive unindented and the
// test would prove nothing about preserving it.
let lines = [
"# Check me",
"",
"## Description",
"- [ ] A checkbox in the description, which is not a criterion.",
"",
"## Acceptance Criteria",
"- [ ] alpha shared",
"- [x] beta alone",
" A handwritten line inside the section.",
"- [ ] gamma shared",
"",
"## Implementation Plan",
"1. Step one",
"",
"## Metadata",
"",
&format!("- **ID**: {}", UUID),
"- **Status**: backlog",
"",
];
fs::write(
worklane.join("backlog").join(format!("{}_check-me.md", UUID)),
lines.join("\n"),
)
.unwrap();
}
fn run(temp: &TempDir, args: &[&str]) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(args);
cmd.assert().get_output().clone()
}
fn ticket(worklane: &PathBuf) -> String {
fs::read_to_string(worklane.join("backlog").join(format!("{}_check-me.md", UUID))).unwrap()
}
/// The whole point: one line changes and every other keeps its state.
#[test]
fn check_ticks_one_criterion_by_index() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(&temp, &["check", UUID, "1"]);
assert!(out.status.success(), "{:?}", String::from_utf8_lossy(&out.stderr));
let content = ticket(&worklane);
assert!(content.contains("- [x] alpha shared\n"), "{content}");
assert!(content.contains("- [x] beta alone\n"), "beta lost its tick: {content}");
assert!(content.contains("- [ ] gamma shared\n"), "{content}");
}
#[test]
fn check_ticks_one_criterion_by_substring() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["check", UUID, "GAMMA"]);
assert!(ticket(&worklane).contains("- [x] gamma shared\n"));
}
#[test]
fn uncheck_unticks_one_criterion() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["uncheck", UUID, "2"]);
let content = ticket(&worklane);
assert!(content.contains("- [ ] beta alone\n"), "{content}");
assert!(content.contains("- [ ] alpha shared\n"), "{content}");
}
/// The handwritten line sits between two criteria, so it is the thing most likely to
/// be lost by a rewrite, and it must not take a number either.
#[test]
fn a_handwritten_line_in_the_section_survives_and_is_not_numbered() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
// gamma is the third criterion even though it is the fourth line of the section
run(&temp, &["check", UUID, "3"]);
let content = ticket(&worklane);
assert!(content.contains("- [x] gamma shared\n"), "{content}");
assert!(
content.contains(" A handwritten line inside the section.\n"),
"the handwritten line was lost or reindented: {content}"
);
}
/// A checkbox outside the section is not a criterion, so the numbering starts inside it.
#[test]
fn a_checkbox_in_the_description_is_not_a_criterion() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["check", UUID, "1"]);
let content = ticket(&worklane);
assert!(
content.contains("- [ ] A checkbox in the description, which is not a criterion.\n"),
"the description checkbox was ticked: {content}"
);
}
#[test]
fn checking_an_already_checked_criterion_changes_nothing() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let before = ticket(&worklane);
let out = run(&temp, &["check", UUID, "2"]);
assert!(out.status.success());
assert!(
String::from_utf8_lossy(&out.stdout).contains("Already checked"),
"{:?}",
String::from_utf8_lossy(&out.stdout)
);
assert_eq!(ticket(&worklane), before, "the file was rewritten anyway");
}
/// The listed numbers have to be the real ones, or the advice to use the number points
/// at the wrong criterion. alpha and gamma are 1 and 3, never 1 and 2.
#[test]
fn an_ambiguous_substring_lists_the_matches_with_their_real_numbers() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let before = ticket(&worklane);
let out = run(&temp, &["check", UUID, "shared"]);
let stderr = String::from_utf8_lossy(&out.stderr);
assert_eq!(out.status.code(), Some(1));
assert!(stderr.contains("matches 2 criteria"), "{stderr:?}");
assert!(stderr.contains("1. [ ] alpha shared"), "{stderr:?}");
assert!(stderr.contains("3. [ ] gamma shared"), "{stderr:?}");
assert!(!stderr.contains("2. [ ] gamma"), "renumbered: {stderr:?}");
assert_eq!(ticket(&worklane), before);
}
#[test]
fn a_substring_matching_nothing_is_an_error_listing_the_criteria() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(&temp, &["check", UUID, "nowhere"]);
let stderr = String::from_utf8_lossy(&out.stderr);
assert_eq!(out.status.code(), Some(1));
assert!(stderr.contains("No criterion"), "{stderr:?}");
assert!(stderr.contains("1. [ ] alpha shared"), "{stderr:?}");
}
/// A number out of range is a bad index, not a substring that happened to miss.
#[test]
fn an_index_out_of_range_says_so() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(&temp, &["check", UUID, "9"]);
let stderr = String::from_utf8_lossy(&out.stderr);
assert_eq!(out.status.code(), Some(1));
assert!(stderr.contains("is not one of the 3 criteria"), "{stderr:?}");
}
/// No terminal to prompt at, so the list comes back as an error instead. This is the
/// path the opencode wrapper takes, and it must not block on stdin.
#[test]
fn omitting_the_criterion_without_a_terminal_returns_the_list_as_an_error() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let before = ticket(&worklane);
let out = run(&temp, &["check", UUID]);
let stderr = String::from_utf8_lossy(&out.stderr);
assert_eq!(out.status.code(), Some(1));
assert!(stderr.contains("Which criterion"), "{stderr:?}");
assert!(stderr.contains("1. [ ] alpha shared"), "{stderr:?}");
assert!(stderr.contains("2. [x] beta alone"), "{stderr:?}");
assert!(stderr.contains("3. [ ] gamma shared"), "{stderr:?}");
assert_eq!(ticket(&worklane), before);
}
#[test]
fn a_ticket_with_no_criteria_says_so() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
fs::write(
worklane.join("backlog").join("aaaaaaaa-0000-4000-8000-000000000000_bare.md"),
"# Bare\n\n## Acceptance Criteria\n_No acceptance criteria provided._\n\n## Metadata\n\n- **ID**: aaaaaaaa-0000-4000-8000-000000000000\n- **Status**: backlog\n",
)
.unwrap();
let out = run(&temp, &["check", "aaaaaaaa", "1"]);
assert_eq!(out.status.code(), Some(1));
assert!(
String::from_utf8_lossy(&out.stderr).contains("no acceptance criteria"),
"{:?}",
String::from_utf8_lossy(&out.stderr)
);
}
/// show numbers the criteria, so the index check takes is visible where it is read.
#[test]
fn show_numbers_the_criteria() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(&temp, &["show", UUID]);
let stdout = String::from_utf8_lossy(&out.stdout);
assert!(stdout.contains("1. [ ] alpha shared"), "{stdout:?}");
assert!(stdout.contains("2. [x] beta alone"), "{stdout:?}");
assert!(stdout.contains("3. [ ] gamma shared"), "{stdout:?}");
// The handwritten line is shown but takes no number
assert!(stdout.contains(" A handwritten line inside the section."), "{stdout:?}");
assert!(!stdout.contains("4. ["), "the handwritten line was numbered: {stdout:?}");
// And the description checkbox is left as it is, outside the numbering
assert!(
stdout.contains("- [ ] A checkbox in the description"),
"{stdout:?}"
);
}
#[test]
fn check_leaves_nothing_behind() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["check", UUID, "1"]);
let strays: Vec<String> = fs::read_dir(&worklane)
.unwrap()
.filter_map(|e| e.ok())
.map(|e| e.file_name().into_string().unwrap())
.filter(|name| {
!["backlog", "committed", "reviewing", "done", "comments"].contains(&name.as_str())
})
.collect();
assert_eq!(strays, Vec::<String>::new());
}
+209
View File
@@ -431,3 +431,212 @@ fn mv_fails_when_status_field_is_missing() {
assert!(worklane.join("backlog").join(filename).exists());
assert!(!worklane.join("committed").join(filename).exists());
}
use std::os::unix::fs::PermissionsExt;
fn chmod(path: &std::path::Path, mode: u32) {
let mut perms = fs::metadata(path).unwrap().permissions();
perms.set_mode(mode);
fs::set_permissions(path, perms).unwrap();
}
fn md_files(dir: &std::path::Path) -> Vec<String> {
match fs::read_dir(dir) {
Ok(entries) => entries
.filter_map(|e| e.ok())
.map(|e| e.file_name().into_string().unwrap())
.filter(|name| name.ends_with(".md"))
.collect(),
Err(_) => vec![],
}
}
/// Nothing is staged in a status directory, so nothing can be left behind that the
/// listing would read as a ticket.
fn stray_files(worklane: &std::path::Path) -> Vec<String> {
let mut stray: Vec<String> = fs::read_dir(worklane)
.unwrap()
.filter_map(|e| e.ok())
.map(|e| e.file_name().into_string().unwrap())
.filter(|name| !["backlog", "committed", "reviewing", "done", "comments"].contains(&name.as_str()))
.collect();
for dir in ["backlog", "committed", "reviewing", "done"] {
stray.extend(
fs::read_dir(worklane.join(dir))
.into_iter()
.flatten()
.filter_map(|e| e.ok())
.map(|e| e.file_name().into_string().unwrap())
.filter(|name| !name.ends_with(".md")),
);
}
stray
}
/// The bug this fixes. The old order renamed first and wrote second, so a write
/// that failed left the ticket in its new directory still claiming the old status.
/// A read-only ticket file is the cheapest way to make the write fail.
#[test]
fn mv_never_leaves_stale_content_in_the_target_directory() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let filename = create_ticket(
&worklane,
"backlog",
"Read Only",
"A description.",
"abc123def456789012345678901234567890",
"alice",
"2026-12-31",
"test",
);
let source = worklane.join("backlog").join(&filename);
chmod(&source, 0o444);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.success();
// Wherever it ended up, its Status must agree with the directory it is in
let moved = worklane.join("committed").join(&filename);
assert!(moved.exists(), "ticket did not move");
let content = fs::read_to_string(&moved).unwrap();
assert!(
content.contains("- **Status**: committed"),
"stale status: {content:?}"
);
assert!(!content.contains("- **Status**: backlog"), "{content:?}");
assert_eq!(md_files(&worklane.join("backlog")).len(), 0);
assert_eq!(stray_files(&worklane), Vec::<String>::new());
}
/// The other criterion: one directory or the other, never both. An unwritable
/// target directory fails the move at the last step, which is the step that would
/// have to be reordered to break this.
#[test]
fn mv_leaves_the_ticket_in_one_place_when_the_move_fails() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let filename = create_ticket(
&worklane,
"backlog",
"Blocked Move",
"A description.",
"abc123def456789012345678901234567890",
"alice",
"2026-12-31",
"test",
);
let target = worklane.join("committed");
chmod(&target, 0o555);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
let assert = cmd
.current_dir(&temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.failure();
let stderr = String::from_utf8(assert.get_output().stderr.clone()).unwrap();
// Named, not a bare io error
assert!(stderr.contains("Blocked Move"), "{stderr}");
assert_eq!(
md_files(&worklane.join("backlog")),
vec![filename.clone()],
"the ticket left its own directory"
);
assert_eq!(md_files(&target).len(), 0, "the ticket is in both places");
assert_eq!(stray_files(&worklane), Vec::<String>::new());
// The documented worst case: still in its old directory, carrying a Status one
// move ahead because the content was written before the move was attempted.
let left = fs::read_to_string(worklane.join("backlog").join(&filename)).unwrap();
assert!(left.contains("- **Status**: committed"), "{left:?}");
// And the state is recoverable, because the directory is what decides the
// current status, so a retry moves it rather than refusing.
chmod(&target, 0o755);
let mut retry = Command::cargo_bin(BIN_NAME).unwrap();
retry
.current_dir(&temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.success();
assert_eq!(md_files(&target), vec![filename]);
assert_eq!(md_files(&worklane.join("backlog")).len(), 0);
}
#[test]
fn mv_leaves_nothing_behind_on_success() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(
&worklane,
"backlog",
"Clean Move",
"A description.",
"abc123def456789012345678901234567890",
"alice",
"2026-12-31",
"test",
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["mv", "abc123def4567", "--status", "committed"])
.assert()
.success();
assert_eq!(stray_files(&worklane), Vec::<String>::new());
}
/// Duplicate titles are allowed, so the file cannot be located by title. It used to be,
/// and `mv <uuid-of-second>` moved the first ticket that shared its title.
#[test]
fn mv_moves_the_resolved_ticket_when_two_share_a_title() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
for uuid in [
"11111111-aaaa-bbbb-cccc-dddddddddddd",
"22222222-aaaa-bbbb-cccc-dddddddddddd",
] {
fs::write(
worklane.join("backlog").join(format!("{}_foo.md", uuid)),
format!(
"# Foo\n\n## Metadata\n\n- **ID**: {}\n- **Status**: backlog\n",
uuid
),
)
.unwrap();
}
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["mv", "22222222", "--status", "committed"])
.assert()
.success();
assert_eq!(
md_files(&worklane.join("committed")),
vec!["22222222-aaaa-bbbb-cccc-dddddddddddd_foo.md".to_string()],
"the wrong ticket moved"
);
assert_eq!(
md_files(&worklane.join("backlog")),
vec!["11111111-aaaa-bbbb-cccc-dddddddddddd_foo.md".to_string()]
);
}
+417
View File
@@ -0,0 +1,417 @@
use assert_cmd::Command;
use assert_fs::TempDir;
use assert_fs::fixture::{PathChild, PathCreateDir};
use std::fs;
use std::path::PathBuf;
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
const UUID: &str = "475534a3-8a0d-45cb-9a97-39c251dd8e39";
fn setup_worklane(temp: &TempDir) -> PathBuf {
let worklane = temp.child(".worklane");
worklane.create_dir_all().unwrap();
for dir in ["backlog", "committed", "reviewing", "done"] {
worklane.child(dir).create_dir_all().unwrap();
}
worklane.path().to_path_buf()
}
/// A fully populated ticket, with one criterion already ticked and a section the tool
/// knows nothing about, so every test can check both survive.
fn create_ticket(worklane: &PathBuf) -> String {
let filename = format!("{}_original-title.md", UUID);
fs::write(
worklane.join("backlog").join(&filename),
format!(
"# Original title\n\
\n\
## Description\n\
First paragraph.\n\
\n\
Second paragraph.\n\
\n\
## Acceptance Criteria\n\
- [x] Crit one\n\
- [ ] Crit two\n\
\n\
## Implementation Plan\n\
1. Step one\n\
2. Step two\n\
\n\
## Notes\n\
A handwritten note the tool knows nothing about.\n\
\n\
## Metadata\n\
\n\
- **ID**: {}\n\
- **Priority**: 3\n\
- **Tags**: alpha\n\
- **Due**: 2026-09-01\n\
- **Owner**: alice\n\
- **Created At**: 2026-08-21 02:10:17\n\
- **Status**: backlog\n",
UUID
),
)
.unwrap();
filename
}
fn run(temp: &TempDir, args: &[&str]) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(args);
cmd.assert().get_output().clone()
}
fn ticket(worklane: &PathBuf) -> String {
let entry = fs::read_dir(worklane.join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
.find(|e| e.file_name().to_string_lossy().ends_with(".md"))
.expect("no ticket file");
fs::read_to_string(entry.path()).unwrap()
}
fn stray_files(worklane: &PathBuf) -> Vec<String> {
fs::read_dir(worklane)
.unwrap()
.filter_map(|e| e.ok())
.map(|e| e.file_name().into_string().unwrap())
.filter(|name| {
!["backlog", "committed", "reviewing", "done", "comments"].contains(&name.as_str())
})
.collect()
}
#[test]
fn set_replaces_each_field_it_is_given() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(
&temp,
&[
"set", UUID,
"--description", "Only paragraph.",
"--acceptance", "New crit",
"--plan", "New step",
"--tags", "beta,gamma",
"--due", "2026-12-31",
"--priority", "1",
],
);
assert!(out.status.success(), "{:?}", String::from_utf8_lossy(&out.stderr));
let content = ticket(&worklane);
assert!(content.contains("## Description\nOnly paragraph.\n"), "{content}");
assert!(content.contains("## Acceptance Criteria\n- [ ] New crit\n"), "{content}");
assert!(content.contains("## Implementation Plan\n1. New step\n"), "{content}");
assert!(content.contains("- **Tags**: beta,gamma"), "{content}");
assert!(content.contains("- **Due**: 2026-12-31"), "{content}");
assert!(content.contains("- **Priority**: 1"), "{content}");
// The fields it was not given are untouched
assert!(content.contains("- **Owner**: alice"), "{content}");
assert!(content.contains("- **Status**: backlog"), "{content}");
}
/// The criterion is ticked in the fixture, so an unrelated edit must leave it ticked.
#[test]
fn set_leaves_a_ticked_criterion_and_an_unknown_section_alone() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["set", UUID, "--due", "2026-12-31"]);
let content = ticket(&worklane);
assert!(content.contains("- [x] Crit one"), "the tick was lost: {content}");
assert!(
content.contains("## Notes\nA handwritten note the tool knows nothing about.\n"),
"the unknown section was lost: {content}"
);
}
#[test]
fn set_renames_the_file_for_a_new_title_and_keeps_the_uuid() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["set", UUID, "--title", "A brand new title"]);
let names: Vec<String> = fs::read_dir(worklane.join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
.map(|e| e.file_name().into_string().unwrap())
.collect();
assert_eq!(names, vec![format!("{}_a-brand-new-title.md", UUID)]);
assert!(ticket(&worklane).starts_with("# A brand new title\n"));
// And the renamed ticket is still reachable, by the new title and by the uuid
for search in ["brand new", "475534a3"] {
let out = run(&temp, &["show", search]);
assert!(out.status.success(), "{search} did not resolve");
assert!(String::from_utf8_lossy(&out.stdout).contains("A brand new title"));
}
}
#[test]
fn set_reports_no_change_and_leaves_the_file_alone() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let before = ticket(&worklane);
let out = run(&temp, &["set", UUID, "--due", "2026-09-01", "--priority", "3"]);
assert!(out.status.success());
assert!(
String::from_utf8_lossy(&out.stdout).contains("No changes"),
"{:?}",
String::from_utf8_lossy(&out.stdout)
);
assert_eq!(ticket(&worklane), before, "the file was rewritten anyway");
}
/// Only the field that actually differs is claimed, so the report cannot overstate.
#[test]
fn set_reports_only_the_fields_that_changed() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(&temp, &["set", UUID, "--due", "2026-09-01", "--priority", "5"]);
let stdout = String::from_utf8_lossy(&out.stdout);
assert!(stdout.contains("priority"), "{stdout:?}");
assert!(!stdout.contains("due"), "{stdout:?}");
}
/// An empty scalar looks like a way to clear a field, and clearing is not supported.
#[test]
fn set_refuses_an_empty_scalar_as_a_usage_error() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let before = ticket(&worklane);
for flag in ["--title", "--due", "--tags"] {
let out = run(&temp, &["set", UUID, flag, ""]);
assert_eq!(out.status.code(), Some(2), "{flag} was accepted");
assert!(
String::from_utf8_lossy(&out.stderr).contains("clearing a field is not supported"),
"{flag}: {:?}",
String::from_utf8_lossy(&out.stderr)
);
}
assert_eq!(ticket(&worklane), before);
}
/// An empty value is a paragraph break for a section, so an all-blank one is a
/// clearing attempt rather than a break.
#[test]
fn set_refuses_to_clear_a_section() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let before = ticket(&worklane);
let out = run(&temp, &["set", UUID, "--description", ""]);
assert_eq!(out.status.code(), Some(1));
assert!(
String::from_utf8_lossy(&out.stderr).contains("clearing is not supported"),
"{:?}",
String::from_utf8_lossy(&out.stderr)
);
assert_eq!(ticket(&worklane), before);
}
/// A bare `set <ticket>` would otherwise be a silent no-op.
#[test]
fn set_requires_at_least_one_field() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(&temp, &["set", UUID]);
assert_eq!(out.status.code(), Some(2));
}
/// Interior blanks are paragraph breaks, per 4c516e6, so they have to reach the file.
#[test]
fn set_keeps_a_paragraph_break_in_a_replaced_description() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(
&temp,
&["set", UUID, "-d", "One.", "-d", "", "-d", "Two."],
);
assert!(
ticket(&worklane).contains("## Description\nOne.\n\nTwo.\n\n## Acceptance"),
"{}",
ticket(&worklane)
);
}
#[test]
fn set_accepts_prose_that_begins_with_a_hyphen() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(
&temp,
&["set", UUID, "-a", "--print should be supported", "-t", "-t is the title flag"],
);
assert!(out.status.success(), "{:?}", String::from_utf8_lossy(&out.stderr));
let content = ticket(&worklane);
assert!(content.contains("- [ ] --print should be supported"), "{content}");
assert!(content.starts_with("# -t is the title flag\n"), "{content}");
}
#[test]
fn set_leaves_nothing_behind() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["set", UUID, "--due", "2026-12-31"]);
assert_eq!(stray_files(&worklane), Vec::<String>::new());
}
#[test]
fn append_adds_a_paragraph_items_and_numbered_steps() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let out = run(
&temp,
&[
"append", UUID,
"-d", "A third paragraph.",
"-a", "Crit three",
"-a", "Crit four",
"-p", "Step three",
],
);
assert!(out.status.success(), "{:?}", String::from_utf8_lossy(&out.stderr));
let content = ticket(&worklane);
assert!(
content.contains("Second paragraph.\n\nA third paragraph.\n"),
"no paragraph break: {content}"
);
assert!(
content.contains("- [x] Crit one\n- [ ] Crit two\n- [ ] Crit three\n- [ ] Crit four\n"),
"{content}"
);
// Numbered on from the last step, and the steps above are untouched
assert!(
content.contains("1. Step one\n2. Step two\n3. Step three\n"),
"{content}"
);
}
#[test]
fn append_replaces_an_empty_section_rather_than_following_its_placeholder() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let mut add = Command::cargo_bin(BIN_NAME).unwrap();
add.current_dir(&temp.path())
.args(["add", "--title", "Bare ticket"])
.assert()
.success();
let uuid = fs::read_dir(worklane.join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
.map(|e| e.file_name().into_string().unwrap())
.next()
.map(|name| name.split('_').next().unwrap().to_string())
.unwrap();
run(
&temp,
&["append", &uuid, "-d", "A description arrives late.", "-a", "First crit", "-p", "First step"],
);
let content = ticket(&worklane);
assert!(!content.contains("_No description provided._"), "{content}");
assert!(!content.contains("_No acceptance criteria provided._"), "{content}");
assert!(!content.contains("_No implementation plan provided._"), "{content}");
assert!(content.contains("## Description\nA description arrives late.\n"), "{content}");
assert!(content.contains("## Implementation Plan\n1. First step\n"), "{content}");
}
#[test]
fn append_leaves_a_ticked_criterion_and_an_unknown_section_alone() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
run(&temp, &["append", UUID, "-a", "Crit three"]);
let content = ticket(&worklane);
assert!(content.contains("- [x] Crit one"), "{content}");
assert!(
content.contains("## Notes\nA handwritten note the tool knows nothing about.\n"),
"{content}"
);
}
#[test]
fn append_refuses_when_every_value_is_blank() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
let before = ticket(&worklane);
let out = run(&temp, &["append", UUID, "-a", " "]);
assert_eq!(out.status.code(), Some(1));
assert!(
String::from_utf8_lossy(&out.stderr).contains("Nothing to append"),
"{:?}",
String::from_utf8_lossy(&out.stderr)
);
assert_eq!(ticket(&worklane), before);
}
#[test]
fn append_requires_at_least_one_section() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
assert_eq!(run(&temp, &["append", UUID]).status.code(), Some(2));
}
/// Owner belongs to chown and status to mv, so neither command offers them.
#[test]
fn neither_command_can_write_owner_or_status() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(&worklane);
for args in [
vec!["set", UUID, "--owner", "bob"],
vec!["set", UUID, "--status", "committed"],
vec!["append", UUID, "--owner", "bob"],
] {
let out = run(&temp, &args);
assert_eq!(out.status.code(), Some(2), "{args:?} was accepted");
}
let content = ticket(&worklane);
assert!(content.contains("- **Owner**: alice"));
assert!(content.contains("- **Status**: backlog"));
}
+190
View File
@@ -485,3 +485,193 @@ fn show_renders_the_metadata_as_an_aligned_table() {
let content = fs::read_to_string(worklane.join("backlog").join(filename)).unwrap();
assert!(content.contains("- **Owner**: alice"));
}
/// Write a ticket with an exact uuid and title, since both matter to resolution.
fn ticket_with(worklane: &std::path::Path, status: &str, uuid: &str, title: &str, slug: &str) {
fs::write(
worklane.join(status).join(format!("{}_{}.md", uuid, slug)),
format!(
"# {}\n\n## Metadata\n\n- **ID**: {}\n- **Status**: {}\n",
title, uuid, status
),
)
.unwrap();
}
fn show(temp: &TempDir, search: &str) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg(search);
cmd.assert().get_output().clone()
}
/// The bug. A flat OR of the three predicates put an exact uuid prefix and a title
/// that merely mentions it in the same list, so the search reported as ambiguous
/// the very id the listing had just printed.
#[test]
fn show_prefers_a_uuid_prefix_over_a_title_that_mentions_it() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
ticket_with(
&worklane,
"backlog",
"641e3d5d-ef23-4213-8346-e8b0114b84e9",
"Alpha",
"alpha",
);
ticket_with(
&worklane,
"backlog",
"aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee",
"Notes on 641e3d5 regression",
"notes",
);
let out = show(&temp, "641e3d5");
let stdout = String::from_utf8_lossy(&out.stdout);
assert!(out.status.success(), "{:?}", String::from_utf8_lossy(&out.stderr));
assert!(stdout.contains("Alpha"), "{stdout:?}");
assert!(!stdout.contains("Notes on"), "{stdout:?}");
}
/// `ls` prints SHORT_ID_WIDTH characters, so pasting that back has to resolve. This
/// is the guard against reinstating an eight character minimum.
#[test]
fn show_resolves_the_short_id_the_listing_prints() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let uuid = "641e3d5d-ef23-4213-8346-e8b0114b84e9";
ticket_with(&worklane, "backlog", uuid, "Alpha", "alpha");
let mut ls = Command::cargo_bin(BIN_NAME).unwrap();
ls.current_dir(&temp.path()).args(["ls", "backlog"]);
let listing = String::from_utf8(ls.assert().success().get_output().stdout.clone()).unwrap();
// Take the id exactly as printed, so this couples to the display width rather
// than to a hardcoded number
let printed = listing
.split('(')
.nth(1)
.and_then(|rest| rest.split(')').next())
.expect("no id in the listing")
.to_string();
assert!(printed.len() < 8, "the listing prints {} chars", printed.len());
// A decoy whose title quotes that id. Without it the search would still land on
// Alpha through the filename tier, since the filename contains the uuid, and the
// test would pass under a minimum longer than the printed id.
ticket_with(
&worklane,
"backlog",
"aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee",
&format!("Notes on {} regression", printed),
"notes",
);
let out = show(&temp, &printed);
let stdout = String::from_utf8_lossy(&out.stdout);
assert!(out.status.success(), "{printed} did not resolve");
assert!(stdout.contains("Alpha"), "{stdout:?}");
assert!(!stdout.contains("Notes on"), "{stdout:?}");
}
#[test]
fn show_resolves_a_four_character_uuid_prefix() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
ticket_with(
&worklane,
"backlog",
"641e3d5d-ef23-4213-8346-e8b0114b84e9",
"Alpha",
"alpha",
);
let out = show(&temp, "641e");
assert!(out.status.success());
assert!(String::from_utf8_lossy(&out.stdout).contains("Alpha"));
}
/// Below four characters the search is text, so it must not be read as a prefix
/// matching a large slice of the board.
#[test]
fn show_treats_a_search_below_four_characters_as_text() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
ticket_with(
&worklane,
"backlog",
"641e3d5d-ef23-4213-8346-e8b0114b84e9",
"Alpha",
"alpha",
);
ticket_with(
&worklane,
"backlog",
"aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee",
"Notes on 641 regression",
"notes",
);
// "641" prefixes Alpha's uuid, but it is too short to be read as one, so the
// title match is the only match
let out = show(&temp, "641");
let stdout = String::from_utf8_lossy(&out.stdout);
assert!(out.status.success(), "{:?}", String::from_utf8_lossy(&out.stderr));
assert!(stdout.contains("Notes on"), "{stdout:?}");
assert!(!stdout.contains("Alpha"), "{stdout:?}");
}
/// The last tier earns its place: it reaches the middle of a uuid, which the prefix
/// tier cannot.
#[test]
fn show_falls_back_to_the_filename_for_a_mid_uuid_substring() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
ticket_with(
&worklane,
"backlog",
"641e3d5d-ef23-4213-8346-e8b0114b84e9",
"Alpha",
"alpha",
);
let out = show(&temp, "ef23");
assert!(out.status.success());
assert!(String::from_utf8_lossy(&out.stdout).contains("Alpha"));
}
/// Tiering removes false ambiguity across tiers, not real ambiguity inside one.
#[test]
fn show_still_reports_ambiguity_within_the_uuid_tier() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
ticket_with(
&worklane,
"backlog",
"5eeddeed-1111-2222-3333-444444444444",
"Beta",
"beta",
);
ticket_with(
&worklane,
"backlog",
"5eedbeef-9999-8888-7777-666666666666",
"Gamma",
"gamma",
);
let out = show(&temp, "5eed");
let stderr = String::from_utf8_lossy(&out.stderr);
assert!(!out.status.success());
assert!(stderr.contains("Multiple tickets found"), "{stderr:?}");
assert!(stderr.contains("Beta") && stderr.contains("Gamma"), "{stderr:?}");
}
+82
View File
@@ -0,0 +1,82 @@
use assert_cmd::Command;
use assert_fs::TempDir;
use assert_fs::fixture::{PathChild, PathCreateDir};
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
fn setup_worklane(temp: &TempDir) {
let worklane = temp.child(".worklane");
worklane.create_dir_all().unwrap();
for dir in ["backlog", "committed", "reviewing", "done"] {
worklane.child(dir).create_dir_all().unwrap();
}
}
fn run(temp: &TempDir, args: &[&str]) -> std::process::Output {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(args);
cmd.assert().get_output().clone()
}
/// Same message every other command gives. Checked before the terminal is, so the
/// missing board is what gets reported rather than the missing tty.
#[test]
fn the_tui_outside_a_worklane_directory_gives_the_usual_message() {
let temp = TempDir::new().unwrap();
for args in [vec!["tui"], vec![]] {
let out = run(&temp, &args);
let stderr = String::from_utf8_lossy(&out.stderr);
assert_eq!(out.status.code(), Some(1), "{args:?}");
assert!(
stderr.contains("No .worklane directory found"),
"{args:?}: {stderr:?}"
);
}
}
/// Raw mode on a pipe fails with a bare "No such device or address", which says nothing
/// about the mistake. A bare `worklane` is how the board opens, so a script that lands
/// here by accident has to be pointed at a subcommand.
#[test]
fn the_tui_without_a_terminal_says_so_and_names_an_alternative() {
let temp = TempDir::new().unwrap();
setup_worklane(&temp);
for args in [vec!["tui"], vec![]] {
let out = run(&temp, &args);
let stderr = String::from_utf8_lossy(&out.stderr);
assert_eq!(out.status.code(), Some(1), "{args:?}");
assert!(stderr.contains("needs a terminal"), "{args:?}: {stderr:?}");
assert!(stderr.contains("worklane ls"), "{args:?}: {stderr:?}");
assert!(
!stderr.contains("os error"),
"the raw mode error leaked: {stderr:?}"
);
}
}
/// The subcommands must keep working now that the subcommand is optional.
#[test]
fn an_unknown_subcommand_is_still_a_usage_error() {
let temp = TempDir::new().unwrap();
setup_worklane(&temp);
assert_eq!(run(&temp, &["nonsense"]).status.code(), Some(2));
assert_eq!(run(&temp, &["--bogus"]).status.code(), Some(2));
}
/// `tui` has to appear in the help, or nothing points at it.
#[test]
fn the_help_lists_the_tui_command() {
let temp = TempDir::new().unwrap();
let out = run(&temp, &["--help"]);
let stdout = String::from_utf8_lossy(&out.stdout);
assert!(out.status.success());
assert!(stdout.contains("tui"), "{stdout:?}");
}