Compare commits

...
6 Commits
Author SHA1 Message Date
Ansho ReiandClaude Opus 5 f557437f62 (277a527) Render the metadata section as an aligned table, and bump to 0.3.0
show printed the Metadata block as the markdown list the file stores, so with
seven fields the values did not line up and the block read as file contents
rather than as a summary. It now renders as two aligned columns: field names
left, values right. The file is untouched, this is display only.

content_trim_colored streamed one line at a time, so nothing ever saw the whole
section. The Metadata lines are now taken as a block, since the field column
cannot be sized until every name has been seen.

Column width is measured on the raw names, in characters, and padding is applied
before anything is styled. Measuring a coloured name counts its escape sequences
towards its width, which tilts the table with colour on and not with it off.
paint() is color_text() with the decision passed in, which is what lets a test
render both ways in one process and compare.

colorize_metadata is folded into the renderer, its only caller. A line in the
section that is not a field is carried through rather than dropped, so a hand
written note survives, and an unrecognised field still gets a row.

Plain columns, no border characters: nothing to degrade on a font that lacks
them, and the section rules already carry the only box drawing here.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:12:57 +02:00
Ansho ReiandClaude Opus 5 75fb2b3a6d (4b1e7e8) Print the ticket title once in show
cmd_show printed the resolved title with its rule, then content_trim_colored
printed the "# " heading again out of the file content, so every show output
carried the title twice.

The body now skips the heading, along with the blank line the template puts
under it so nothing is left where it was. cmd_show keeps the surviving copy and
colours it green, which is where the colour guideline puts a title.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:12:22 +02:00
Ansho ReiandClaude Opus 5 8b440593e2 (594c741) Measure heading rules on the displayed name
Section rules repeated the character for the byte length of the whole heading
line, so every rule ran three past its heading for the "## " prefix. The title
rule in cmd_show used byte length, which over-draws for a non-ASCII title.

Both now count characters of the text as displayed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:11:43 +02:00
Ansho ReiandClaude Opus 5 ab1dae098c (641e3d5) Scope metadata field lookup to the Metadata section, and bump to 0.2.1
parse_ticket_field searched every line of the file with contains, and
set_status_field rewrote the first line starting with the Status marker
wherever it sat. Tickets in this repo quote field markers in their
descriptions, so a description list shaped like metadata was read in place
of the real value and rewritten by mv, leaving the metadata stale.

Both now scan only the lines under the Metadata heading and match on a line
prefix rather than a substring. A file with no Metadata heading has no
fields, so mv reports the missing Status field instead of editing prose.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 16:38:35 +02:00
Ansho ReiandClaude Opus 5 2503f9aee9 (3b7edd7) Show priority as a glyph, and bump to 0.2.0
A bare digit in a listing is easy to skip over. Levels render as a
two-segment meter that empties as the level rises: ●● 1, ●◐ 2, ●○ 3,
◐○ 4, ○○ 5, with ·· for unset and ?? for a value outside the range.

Only ●, ◐, ○ and · are used, because they are what frig draws for its
status indicators and so are known to be in the terminal font. The first
cut of this used the quadrant circles ◕ and ◔, which are in a quarter as
many fonts, so terminals substituted them from a fallback that drew them
oversized and the column came out ragged. Two cells of a three-level ramp
gives five steps of ink, 2, 1.5, 1, 0.5, 0, without leaving that safe set.
Tests pin the safe set, the equal width and the monotonic emptying.

The mark carries the level on its own, because colour cannot. Output is
colourless whenever it is piped, which is how the opencode tools and every
script read it, and NO_COLOR turns it off in a terminal too. Colour only
accentuates: brightred, red, orange, cyan, grey, skipping green because
green means title.

The number counts up while the meter empties, since 1 is the most urgent.
That is the convention, but it reads as a bug unless written down, so it
is in AGENTS.md and in the legend.

Both the ramp and the legend come from priority_mark, and `ls --help`
prints the legend, since nothing in a listing explains a mark. brightred
is indexed like grey, for the same reason: it is the spelling that
renders.

Minor bump: two new flags, a new metadata field and a changed ls row,
covering dca0b61 and this ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:50:09 +02:00
Ansho ReiandClaude Opus 5 ddbd45e332 (dca0b61) Add priority as a ticket field
Priority lived in tags, as p1 to p3, which ls could neither sort nor
filter on, nothing validated, and a typo like P1 passed silently. ls
sorted by title only, so a backlog of any size gave no ordering signal.

Levels are 1 to 5 with 1 most urgent, matching what the tags meant.
Omitting the flag leaves the field _Not set_, like Due and Owner: there is
no implicit middle level, because a priority nobody chose is worse than
none. clap rejects anything outside the range before a ticket is written.

Priority parses to three states rather than two. A stored value outside
the range is Invalid, kept distinct from Unset, so a typo cannot read as
"no priority": it shows as ? and sorts just ahead of the unset tail.

ls sorts on priority and falls back to the old title sort, and --priority
filters, composing with the status filter in both the grouped and the
filtered listing. TicketItem becomes a struct, since a sixth tuple field
was past reading.

Migrated the 31 tickets already carrying p1 to p3 tags: the level moves to
the field and the tag is dropped.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:36:19 +02:00
13 changed files with 1045 additions and 109 deletions
@@ -37,6 +37,7 @@ Add a new ticket to the backlog.
- `--tags` (or `-g`): Tags (comma-separated)
- `--due` (or `--due`): Due date in YYYY-MM-DD format
- `--owner` (or `-o`): Owner name
- `--priority`: Priority level, 1 (most urgent) to 5 (least). Unset if omitted
```bash
worklane add -t "Implement login" -d "Add user login page" -t login,auth -p "Design UI" "Build backend" "Write tests" --due 2026-06-01 --owner "ilya"
@@ -56,11 +57,15 @@ List tickets, optionally filtered by status.
**Valid statuses:** `backlog`, `committed`, `reviewing`, `done`
```
worklane ls # List all tickets
worklane ls backlog # List tickets in backlog
worklane ls done # List completed tickets
worklane ls # List all tickets
worklane ls backlog # List tickets in backlog
worklane ls done # List completed tickets
worklane ls --priority 1 # Only the most urgent, any status
worklane ls backlog --priority 2 # Composes with the status filter
```
Tickets are listed priority first, then by title. Tickets with no priority sort last.
### `worklane show`
Show the full details of a single ticket by UUID or title.
+11 -1
View File
@@ -76,6 +76,10 @@ export const add = tool({
owner: tool.schema
.string()
.describe("Ticket owner name. If omitted, defaults to the git user."),
priority: tool.schema
.string()
.describe("Priority level, 1 (most urgent) to 5 (least). Left unset if omitted.")
.optional(),
},
async execute(args: Record<string, any>, context: ToolContext) {
if (!args.title) {
@@ -109,6 +113,7 @@ export const add = tool({
if (args.tags) cmd.push("--tags", args.tags);
if (args.due) cmd.push("--due", args.due);
if (args.owner) cmd.push("--owner", args.owner);
if (args.priority) cmd.push("--priority", String(args.priority));
try {
return await run(cmd, context);
@@ -120,15 +125,20 @@ export const add = tool({
export const ls = tool({
description:
"List all worklane tickets. Optionally filter by status (backlog, committed, reviewing, done).",
"List all worklane tickets, sorted by priority then title. Optionally filter by status and by priority.",
args: {
status: tool.schema
.enum(["backlog", "committed", "reviewing", "done"])
.describe("Filter by status")
.optional(),
priority: tool.schema
.string()
.describe("Only show tickets at this priority, 1 (most urgent) to 5 (least)")
.optional(),
},
async execute(args: Record<string, any>, context: ToolContext) {
const cmd = args.status ? ["ls", args.status] : ["ls"];
if (args.priority) cmd.push("--priority", String(args.priority));
try {
return await run(cmd, context);
} catch (err: any) {
+8 -3
View File
@@ -8,7 +8,7 @@
## Ticket File Format
- Filenames: `<uuid_v4>_<slug>.md`
- Metadata fields parsed by `parse_ticket_field()`: `ID`, `Tags`, `Due`, `Owner`, `Created At`, `Status`
- Metadata fields parsed by `parse_ticket_field()`: `ID`, `Priority`, `Tags`, `Due`, `Owner`, `Created At`, `Status`
- Format: `**Field Name**: value`
- Ticket structure: `# Title` → `## Description` → `## Acceptance Criteria` → `## Implementation Plan` → `## Metadata`
- Comments stored in `.worklane/comments/<ticket_uuid>/<timestamp>.md` with `**Comment**`, `**Author**`, `**Time**` fields
@@ -33,7 +33,7 @@
### Color and Output
- Use `color_text()` helper for colored output — it respects `should_use_colors()` (terminal detection)
- Color codes are defined in `get_color()`: red (31), cyan (36), orange (33), green (32), grey (38;5;8), magenta (1;35)
- Color codes are defined in `get_color()`: red (31), cyan (36), orange (33), green (32), grey (38;5;8), magenta (1;35), brightred (38;5;9)
- Reset color with `\x1b[0m` after colored text
- Bold uses `\x1b[1;35m` (magenta bold)
- Always test color output works correctly in both terminal and pipe modes
@@ -44,12 +44,17 @@
- Timestamp → cyan (36)
- Title → green (32)
- Unknown values (`_None_`, `_Not set_`) → grey (38;5;8)
- Priority ramp → brightred (1), red (2), orange (3), cyan (4), grey (5). Green is deliberately absent: it means title
- Grey is indexed colour 8 in the 256-colour form, not SGR 90 or 37. Both of those failed on a real palette: 90 leans on the bright-black slot and 37 can sit on top of the default foreground. `\x1b[38;5;8m` is byte for byte what crossterm emits for ratatui's `Color::DarkGray`, the grey frig and pantop use for dimmed rows
### Code Organization
- Colorization functions (`colorize_line`, `colorize_metadata`, `colorize_ordered`, `content_trim_colored`) handle markdown formatting
- Colorization functions (`colorize_line`, `colorize_ordered`, `content_trim_colored`) handle markdown formatting
- `show` renders the Metadata section as a two column table via `render_metadata_table`, not line by line. Column width is measured on the raw field names in characters and padding is applied before anything is styled: measuring a coloured string counts its escapes towards its width. `paint()` is `color_text()` with the colour decision passed in, which is what lets a test render both ways in one process
- The title is printed once, by `cmd_show`. `content_trim_colored` skips the `# ` heading in the file content
- Rules under headings are measured on the displayed name in characters, never on the raw line or in bytes
- `resolve_ticket()` scans all status directories — it's the single source for ticket lookup by UUID prefix, title, or filename
- `parse_ticket_field()` handles extracting metadata values from markdown format
- Field lookup, read and write, is scoped to the lines under the `## Metadata` heading and anchored to the start of the line. Prose above it is free text: tickets in this repo quote field markers in their descriptions, and an unscoped search reads or rewrites those instead. `set_status_field()` carries the same scoping
### Ticket Resolution
- `resolve_ticket()` returns `(status, title, content)` tuple
Generated
+1 -1
View File
@@ -1029,7 +1029,7 @@ dependencies = [
[[package]]
name = "worklane"
version = "0.1.2"
version = "0.3.0"
dependencies = [
"anyhow",
"assert_cmd",
+1 -1
View File
@@ -1,6 +1,6 @@
[package]
name = "worklane"
version = "0.1.2"
version = "0.3.0"
edition = "2024"
[dependencies]
+2 -2
View File
@@ -6,8 +6,8 @@ Worklane is a local Kanban flow for agentic software development.
| Command | Description |
|---------|-------------|
| `worklane init` | Creates `.worklane/` with backlog, committed, reviewing, done directories |
| `worklane add` | Creates a ticket in backlog with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--owner` flags |
| `worklane ls` | Lists tickets, optionally filtered by `--status` |
| `worklane add` | Creates a ticket in backlog with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--owner`, `--priority` flags |
| `worklane ls [status]` | Lists tickets, sorted by priority then title. Optional positional status, and `--priority <1-5>` |
| `worklane show <id>` | Shows ticket by UUID prefix (8+ chars) or title substring |
| `worklane mv <id> --status <target> [-f]` | Moves ticket between statuses. Default: forward only, one stage at a time. `-f` bypasses both restrictions |
| `worklane comment <ticket> <body>` | Adds a comment to a ticket by UUID or title |
+29
View File
@@ -1,5 +1,25 @@
use clap::Parser;
use std::sync::LazyLock;
use crate::util::{PRIORITY_RANGE, priority_legend};
/// clap wants a `&str` with a long enough lifetime, and the legend is built from
/// the same ramp the listing uses rather than spelled out a second time.
static PRIORITY_LEGEND: LazyLock<String> = LazyLock::new(priority_legend);
/// Reject a level outside the range at parse time, so no command has to.
fn priority_level(raw: &str) -> Result<u8, String> {
match raw.parse::<u8>() {
Ok(level) if PRIORITY_RANGE.contains(&level) => Ok(level),
_ => Err(format!(
"priority must be a whole number from {} to {}",
PRIORITY_RANGE.start(),
PRIORITY_RANGE.end()
)),
}
}
/// What `--version` prints: the crate version and the commit it was built from.
///
/// The sha is the part that matters. Two binaries built weeks apart both call
@@ -51,12 +71,21 @@ pub enum Command {
/// Owner
#[arg(short, long)]
owner: Option<String>,
/// Priority, 1 (most urgent) to 5 (least). Left unset if omitted.
#[arg(long, value_parser = priority_level)]
priority: Option<u8>,
},
/// List tickets, optionally filtered by status
#[command(after_help = PRIORITY_LEGEND.as_str())]
Ls {
/// Filter by status (backlog, committed, reviewing, done)
status: Option<String>,
/// Only show tickets at this priority, 1 (most urgent) to 5 (least)
#[arg(long, value_parser = priority_level)]
priority: Option<u8>,
},
/// Show a ticket by UUID or title
+31 -7
View File
@@ -29,7 +29,11 @@ pub fn cmd_init(start: &Path) -> Result<()> {
Ok(())
}
pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()> {
pub fn cmd_ls(
status_filter: &Option<String>,
priority_filter: Option<u8>,
worklane_dir: &Path,
) -> Result<()> {
if let Some(status) = status_filter {
let status_path = worklane_dir.join(status);
if !status_path.exists() {
@@ -39,7 +43,7 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
));
}
let items = collect_ticket_items(&status_path)?;
let items = filter_by_priority(collect_ticket_items(&status_path)?, priority_filter);
if items.is_empty() {
println!("No tickets in '{}' status.", status);
@@ -57,8 +61,8 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
if !status_path.exists() {
continue;
}
let entries: Vec<_> = fs::read_dir(&status_path)?.filter_map(|e| e.ok()).collect();
let count = entries.len();
let items = filter_by_priority(collect_ticket_items(&status_path)?, priority_filter);
let count = items.len();
let label = if count == 1 { "ticket" } else { "tickets" };
println!(" [{}] {} {}", status.to_uppercase(), count, label);
}
@@ -73,7 +77,7 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
continue;
}
let items = match collect_ticket_items(&status_path) {
Ok(items) => items,
Ok(items) => filter_by_priority(items, priority_filter),
Err(_) => continue,
};
if items.is_empty() {
@@ -88,6 +92,17 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
Ok(())
}
/// Keep only the tickets at `level`, or everything when no level was asked for.
fn filter_by_priority(items: Vec<TicketItem>, level: Option<u8>) -> Vec<TicketItem> {
match level {
Some(level) => items
.into_iter()
.filter(|item| item.priority == Priority::Level(level))
.collect(),
None => items,
}
}
pub fn cmd_add(
title: &str,
description: &[String],
@@ -96,6 +111,7 @@ pub fn cmd_add(
tags: &[String],
due: &Option<String>,
owner: &Option<String>,
priority: Option<u8>,
start: &Path,
) -> Result<()> {
let owner = match owner {
@@ -141,6 +157,7 @@ pub fn cmd_add(
## Metadata\n\
\n\
- **ID**: {}\n\
- **Priority**: {}\n\
- **Tags**: {}\n\
- **Due**: {}\n\
- **Owner**: {}\n\
@@ -168,6 +185,10 @@ pub fn cmd_add(
.join("\n")
},
id,
match priority {
Some(level) => level.to_string(),
None => "_Not set_".to_string(),
},
if tags.is_empty() {
"_None_".to_string()
} else {
@@ -273,8 +294,11 @@ pub fn cmd_show(search: &str, worklane_dir: &Path) -> Result<()> {
let (_status, title, content) = resolve_ticket(search, worklane_dir)?;
let ticket_uuid = parse_ticket_field(&content, "ID");
println!("{}", title);
println!("{}", "─".repeat(title.len()));
// The only title in the output: content_trim_colored used to print it a second
// time from the file content. Green per the colour guideline, and the rule is
// measured in characters so a non-ASCII title is not over-drawn.
println!("{}", color_text(&title, "green"));
println!("{}", "─".repeat(title.chars().count()));
println!("\n{}", content_trim_colored(&content));
if ticket_uuid != "_Not set_" {
+4 -2
View File
@@ -24,6 +24,7 @@ fn main() -> Result<()> {
tags,
due,
owner,
priority,
} => cmd_add(
&title,
&description,
@@ -32,11 +33,12 @@ fn main() -> Result<()> {
&tags,
&due,
&owner,
priority,
&start,
),
Command::Ls { status } => {
Command::Ls { status, priority } => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_ls(&status, &worklane_dir)
cmd_ls(&status, priority, &worklane_dir)
}
Command::Show { id } => {
let worklane_dir = find_worklane_dir(&start)?;
+715 -89
View File
@@ -67,18 +67,28 @@ pub fn get_color(color: &str) -> &'static str {
// Bold, per the guideline in AGENTS.md. Its absence meant colorize_line
// asked for a colour that did not exist and got an empty prefix.
"magenta" => "\x1b[1;35m",
// Indexed, for the same reason grey is: this is the spelling that renders.
"brightred" => "\x1b[38;5;9m",
_ => "",
}
}
pub fn color_text(text: &str, color: &str) -> String {
if should_use_colors() {
/// `color_text` with the decision passed in rather than asked for.
///
/// The seam matters for anything that aligns columns: a caller has to be able to
/// render both ways in one process to prove the padding does not depend on it.
pub fn paint(text: &str, color: &str, enabled: bool) -> String {
if enabled {
format!("{}{}{}", get_color(color), text, "\x1b[0m")
} else {
text.to_string()
}
}
pub fn color_text(text: &str, color: &str) -> String {
paint(text, color, should_use_colors())
}
pub fn find_worklane_dir(start: &Path) -> Result<std::path::PathBuf> {
let mut current = start.canonicalize()?;
@@ -249,30 +259,54 @@ pub fn format_comments(comments: &[(String, String, String, String)]) -> String
}
pub fn content_trim_colored(content: &str) -> String {
let lines: Vec<&str> = content.trim().lines().collect();
let colored = should_use_colors();
let mut result = String::new();
let mut current_section = "";
let mut i = 0;
while i < lines.len() {
let line = lines[i];
for line in &lines {
// Track current section
if line.starts_with("## ") {
if let Some(section_name) = line.strip_prefix("## ") {
current_section = line;
let section_name = &line[3..];
result.push_str(&color_text(section_name, "orange"));
result.push_str(&paint(section_name, "orange", colored));
result.push('\n');
result.push_str(&"─".repeat(line.len()));
// Measured on the name as displayed, in characters. The rule used to span
// the raw line, so it ran three past the heading for the "## ", and byte
// length over-drew for anything non-ASCII.
result.push_str(&"─".repeat(section_name.chars().count()));
result.push('\n');
result.push('\n');
i += 1;
// Metadata is rendered as a block, so it is consumed here rather than
// falling through to the line-at-a-time cases below.
if is_metadata_heading(line) {
let end = lines[i..]
.iter()
.position(|l| l.starts_with("## "))
.map_or(lines.len(), |offset| i + offset);
result.push_str(&render_metadata_table(&lines[i..end], colored));
i = end;
}
continue;
}
// First line is the title header - color it in green
// The title belongs to cmd_show, which prints it with its rule. Printing it
// again from the file content is what repeated it in every show output.
if line.starts_with("# ") && current_section.is_empty() {
let header = &line[2..]; // Remove "# "
result.push_str(&color_text(header, "green"));
result.push('\n');
i += 1;
// Along with the blank line the template puts under it, so dropping the
// title does not leave a gap where it used to be.
while i < lines.len() && lines[i].trim().is_empty() {
i += 1;
}
continue;
}
i += 1;
// Implementation Plan - color numbers in cyan
if current_section == "## Implementation Plan" {
result.push_str(&colorize_ordered(line));
@@ -280,16 +314,9 @@ pub fn content_trim_colored(content: &str) -> String {
continue;
}
// Metadata - color field names in RED
if current_section == "## Metadata" {
result.push_str(&colorize_metadata(line));
result.push('\n');
continue;
}
// Acceptance Criteria checkboxes
if line.starts_with("- [ ]") {
result.push_str(&color_text("- [ ]", "grey"));
result.push_str(&paint("- [ ]", "grey", colored));
result.push_str(&line[5..]);
result.push('\n');
continue;
@@ -344,41 +371,91 @@ pub fn colorize_ordered(line: &str) -> String {
line.to_string()
}
pub fn colorize_metadata(line: &str) -> String {
if !line.contains("**") {
return line.to_string();
/// Space between the field column and the value column.
const METADATA_GUTTER: &str = " ";
/// One line of the Metadata section, as the table sees it.
enum MetadataRow<'a> {
/// A `- **Name**: value` line, the shape the file stores fields in.
Field { name: &'a str, value: &'a str },
/// Anything else, carried through verbatim so a hand-written note in the
/// section is not dropped on the way to the screen.
Other(&'a str),
}
/// Split a metadata line into a field and its value, sharing the anchoring rules
/// `parse_ticket_field` uses: list marker optional, name matched at the start.
fn metadata_row(line: &str) -> MetadataRow<'_> {
let body = metadata_field_body(line);
let Some(rest) = body.strip_prefix("**") else {
return MetadataRow::Other(line);
};
let Some(close) = rest.find("**:") else {
return MetadataRow::Other(line);
};
MetadataRow::Field {
name: &rest[..close],
value: rest[close + "**:".len()..].trim(),
}
}
/// The value cell for a field, styled per the colour guideline.
fn metadata_value_cell(name: &str, value: &str, colored: bool) -> String {
if name == "Priority" {
// Reads as a glyph, while the file keeps storing the number.
let (glyph, colour) = priority_mark(priority_from_value(value));
return format!("{} {}", paint(glyph, colour, colored), value);
}
let content = line;
let open_pos = match content.find("**") {
Some(p) => p,
None => return content.to_string(),
};
if is_unknown_value(value) {
return paint(value, "grey", colored);
}
let after_open = open_pos + 2;
let remaining = &content[after_open..];
let close_pos = match remaining.find("**") {
Some(p) => p,
None => return content.to_string(),
};
value.to_string()
}
let field_name = &content[after_open..after_open + close_pos];
let after_field = &content[after_open + close_pos + 2..];
/// Render the Metadata section as two aligned columns.
///
/// Taken as a block rather than a line at a time because the field column cannot be
/// sized until every name has been seen. The file is untouched by this: it goes on
/// storing the markdown list, and this is only how the list is shown.
fn render_metadata_table(lines: &[&str], colored: bool) -> String {
// The heading already emits its own blank separator, so the one the template
// puts under it would otherwise open the section with a gap.
let start = lines
.iter()
.position(|line| !line.trim().is_empty())
.unwrap_or(lines.len());
let rows: Vec<MetadataRow> = lines[start..].iter().map(|line| metadata_row(line)).collect();
let colored_field = color_text(field_name, "red");
let value_text = after_field.strip_prefix(": ").map(|s| s.trim()).unwrap_or(after_field);
let after_field_colored = if is_unknown_value(value_text) {
color_text(after_field, "grey")
} else {
after_field.to_string()
};
// Measured on the raw names, in characters, and padded before anything is
// styled. Measuring a coloured name counts its escape sequences towards its
// width, which is what tilts a table when colour is on and not when it is off.
let field_width = rows
.iter()
.filter_map(|row| match row {
MetadataRow::Field { name, .. } => Some(name.chars().count()),
MetadataRow::Other(_) => None,
})
.max()
.unwrap_or(0);
format!(
"{}{}{}",
&content[..open_pos],
colored_field,
after_field_colored
)
let mut result = String::new();
for row in &rows {
match row {
MetadataRow::Field { name, value } => {
result.push_str(&paint(name, "red", colored));
result.push_str(&" ".repeat(field_width - name.chars().count()));
result.push_str(METADATA_GUTTER);
result.push_str(&metadata_value_cell(name, value, colored));
}
MetadataRow::Other(text) => result.push_str(&colorize_line(text)),
}
result.push('\n');
}
result
}
pub fn is_unknown_value(value: &str) -> bool {
@@ -434,33 +511,61 @@ fn is_delimiter(chars: &[char], at: usize) -> bool {
chars.get(at) == Some(&'*') && chars.get(at + 1) == Some(&'*')
}
pub fn parse_ticket_field(content: &str, field: &str) -> String {
let pattern = format!("**{}**:", field);
const METADATA_HEADING: &str = "## Metadata";
fn is_metadata_heading(line: &str) -> bool {
line.trim_end() == METADATA_HEADING
}
/// The lines of the Metadata section, or nothing when the heading is absent.
///
/// Field lookup has to be anchored here. Prose above the section is free text, so a
/// description quoting a field marker would otherwise shadow the real value below it.
fn metadata_lines(content: &str) -> impl Iterator<Item = &str> {
content
.lines()
.find(|line| line.contains(&pattern))
.map(|line| {
line.splitn(2, &pattern)
.nth(1)
.unwrap_or("_Not set_")
.trim()
.to_string()
})
.unwrap_or("_Not set_".to_string())
.skip_while(|line| !is_metadata_heading(line))
.skip(1)
.take_while(|line| !line.starts_with("## "))
}
/// A metadata line without its list marker, so lookup can match on a prefix rather
/// than searching the whole line.
fn metadata_field_body(line: &str) -> &str {
let line = line.trim_start();
line.strip_prefix("- ").unwrap_or(line)
}
pub fn parse_ticket_field(content: &str, field: &str) -> String {
let prefix = format!("**{}**:", field);
metadata_lines(content)
.find_map(|line| metadata_field_body(line).strip_prefix(&prefix))
.map(|value| value.trim().to_string())
.unwrap_or_else(|| "_Not set_".to_string())
}
fn is_status_line(line: &str) -> bool {
let body = metadata_field_body(line);
// The second spelling is what earlier versions wrote, repair it on the way through.
line.starts_with("- **Status**:") || line.starts_with("- **-Status**:")
body.starts_with("**Status**:") || body.starts_with("**-Status**:")
}
// Rewrite the Status field in the Metadata section, leaving every other line untouched.
//
// Scoped to the section for the same reason as parse_ticket_field: a description line
// shaped like the Status field would otherwise be rewritten in its place, corrupting
// the prose and leaving the real metadata stale.
pub fn set_status_field(content: &str, target_status: &str, title: &str) -> Result<String> {
let mut updated = String::with_capacity(content.len());
let mut in_metadata = false;
let mut found = false;
for line in content.lines() {
if !found && is_status_line(line) {
if line.starts_with("## ") {
in_metadata = is_metadata_heading(line);
}
if in_metadata && !found && is_status_line(line) {
updated.push_str("- **Status**: ");
updated.push_str(target_status);
found = true;
@@ -496,36 +601,139 @@ pub fn status_dirs() -> Vec<&'static str> {
vec!["backlog", "committed", "reviewing", "done"]
}
pub type TicketItem = (String, String, String, String, String);
/// Lowest and highest level a ticket can carry. 1 is the most urgent, which is
/// what the `p1` to `p3` tags this replaced already meant.
pub const PRIORITY_RANGE: std::ops::RangeInclusive<u8> = 1..=5;
/// A ticket's priority as it comes off disk.
///
/// Three states, not two: a value outside the range has to stay distinguishable
/// from no value at all, or a typo silently reads as "no priority".
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Priority {
Level(u8),
Unset,
Invalid,
}
impl Priority {
/// Sort weight. Levels first in order, then anything wrong, then anything
/// absent, so a typo surfaces above the long tail of unset tickets.
pub fn rank(&self) -> u8 {
match self {
Priority::Level(level) => *level,
Priority::Invalid => u8::MAX - 1,
Priority::Unset => u8::MAX,
}
}
}
/// A priority from the value alone, for callers that already have it in hand.
pub fn priority_from_value(raw: &str) -> Priority {
let raw = raw.trim();
if is_unknown_value(raw) {
return Priority::Unset;
}
match raw.parse::<u8>() {
Ok(level) if PRIORITY_RANGE.contains(&level) => Priority::Level(level),
_ => Priority::Invalid,
}
}
pub fn parse_priority(content: &str) -> Priority {
priority_from_value(&parse_ticket_field(content, "Priority"))
}
pub struct TicketItem {
pub title: String,
pub owner: String,
pub due: String,
pub id: String,
pub created: String,
pub priority: Priority,
}
/// Grey for a value that is not set, per the colour guideline.
///
/// `show` already did this through `colorize_metadata`, so the listing was the
/// one place that ignored the rule.
fn dim_if_unset(value: &str) -> String {
/// `show` already did this in its metadata rendering, so the listing was the one
/// place that ignored the rule.
fn dim_if_unset(value: &str, colored: bool) -> String {
if is_unknown_value(value) {
color_text(value, "grey")
paint(value, "grey", colored)
} else {
value.to_string()
}
}
pub fn display_ticket_items(items: &Vec<TicketItem>) {
for (title, owner, due, uuid, ts) in items {
let uuid_colored = color_text(uuid, "red");
let owner = dim_if_unset(owner);
let due = dim_if_unset(due);
/// The mark and colour for a level, from one place.
///
/// A two-segment meter that empties as the level rises, so the level is legible
/// from shape alone: colour is off whenever output is piped, and NO_COLOR turns it
/// off in a terminal too, so colour accentuates and never encodes.
///
/// Only three glyphs, the ones frig uses for its status indicators and which are
/// therefore known to render here. The quadrant circles this first used are in a
/// quarter as many fonts, so terminals substituted them from a fallback font that
/// draws them oversized. Two cells of a three-level ramp gives five steps of ink,
/// 2, 1.5, 1, 0.5, 0, without leaving that safe set.
///
/// The number counts up while the mark empties out, because 1 is the most urgent.
/// That is the convention every tracker uses and what the p1 tags this replaced
/// already meant.
pub fn priority_mark(priority: Priority) -> (&'static str, &'static str) {
match priority {
Priority::Level(1) => ("\u{25cf}\u{25cf}", "brightred"),
Priority::Level(2) => ("\u{25cf}\u{25d0}", "red"),
Priority::Level(3) => ("\u{25cf}\u{25cb}", "orange"),
Priority::Level(4) => ("\u{25d0}\u{25cb}", "cyan"),
Priority::Level(5) => ("\u{25cb}\u{25cb}", "grey"),
// Unreachable while Level is only built by parse_priority, which checks
// the range, but a level added later should not silently render blank.
Priority::Level(_) | Priority::Invalid => ("??", "brightred"),
Priority::Unset => ("\u{b7}\u{b7}", "grey"),
}
}
if ts.is_empty() {
println!(
" ({}) {} | Owner: {} | Due: {}",
uuid_colored, title, owner, due
);
} else {
let ts_colored = color_text(ts, "cyan");
/// The legend, for help text. Nothing else in a listing explains the glyphs.
pub fn priority_legend() -> String {
let levels = PRIORITY_RANGE
.map(|level| {
let (glyph, _) = priority_mark(Priority::Level(level));
format!("{} {}", glyph, level)
})
.collect::<Vec<_>>()
.join(" ");
let (unset, _) = priority_mark(Priority::Unset);
format!("Priority: {levels} {unset} unset 1 is most urgent")
}
fn show_priority(priority: Priority, colored: bool) -> String {
let (glyph, colour) = priority_mark(priority);
paint(glyph, colour, colored)
}
pub fn display_ticket_items(items: &[TicketItem]) {
let colored = should_use_colors();
for item in items {
let id = paint(&item.id, "red", colored);
let owner = dim_if_unset(&item.owner, colored);
let due = dim_if_unset(&item.due, colored);
let priority = show_priority(item.priority, colored);
if item.created.is_empty() {
println!(
" {} ({}) {} | Owner: {} | Due: {}",
ts_colored, uuid_colored, title, owner, due
priority, id, item.title, owner, due
);
} else {
let created = paint(&item.created, "cyan", colored);
println!(
" {} {} ({}) {} | Owner: {} | Due: {}",
priority, created, id, item.title, owner, due
);
}
}
@@ -547,19 +755,25 @@ pub fn collect_ticket_items(status_path: impl AsRef<Path>) -> Result<Vec<TicketI
let due = parse_ticket_field(&content, "Due");
let filename = e.path().file_stem()?.to_string_lossy().to_string();
let created_at = parse_ticket_field(&content, "Created At");
let short_date = format_created_at(&created_at);
Some((
Some(TicketItem {
title,
owner,
due,
short_id(&filename).to_string(),
short_date,
))
id: short_id(&filename).to_string(),
created: format_created_at(&created_at),
priority: parse_priority(&content),
})
})
.collect();
items.sort_by(|a, b| a.0.to_lowercase().cmp(&b.0.to_lowercase()));
// Priority first, title as the tiebreak, which is what the sort used to be.
items.sort_by(|a, b| {
a.priority
.rank()
.cmp(&b.priority.rank())
.then_with(|| a.title.to_lowercase().cmp(&b.title.to_lowercase()))
});
Ok(items)
}
@@ -598,21 +812,433 @@ mod tests {
#[test]
fn unset_values_are_dimmed_and_set_ones_are_not() {
// Colour is off in a test process, so this asserts the decision, not the escape
// Both paths, now that the colour decision is a parameter: with colour off the
// text has to come back untouched, with it on only the unset values get wrapped
for unset in ["_Not set_", "_None_"] {
assert!(is_unknown_value(unset), "{unset} should count as unset");
assert_eq!(dim_if_unset(unset), unset);
assert_eq!(dim_if_unset(unset, false), unset);
assert_eq!(dim_if_unset(unset, true), paint(unset, "grey", true));
}
for set in ["alice", "2026-12-31", "bug,frontend"] {
assert!(!is_unknown_value(set));
assert_eq!(dim_if_unset(set), set);
assert_eq!(dim_if_unset(set, false), set);
assert_eq!(dim_if_unset(set, true), set);
}
}
fn ticket_with_priority(raw: &str) -> String {
format!("# T\n\n## Metadata\n\n- **Priority**: {}\n", raw)
}
/// A ticket whose prose quotes the field markers it also carries as metadata,
/// as a list so the quoted lines start with the marker. This repo files tickets
/// about the metadata format, so it is the normal case here rather than a corner.
fn ticket_shadowing_its_own_metadata() -> String {
"# Shadow\n\
\n\
## Description\n\
The current format is:\n\
- **Owner**: nobody\n\
- **Status**: backlog\n\
\n\
## Metadata\n\
\n\
- **ID**: real-id\n\
- **Owner**: alice\n\
- **Status**: backlog\n"
.to_string()
}
#[test]
fn prose_quoting_a_field_marker_does_not_shadow_the_metadata() {
let content = ticket_shadowing_its_own_metadata();
assert_eq!(parse_ticket_field(&content, "Owner"), "alice");
assert_eq!(parse_ticket_field(&content, "ID"), "real-id");
assert_eq!(parse_ticket_field(&content, "Status"), "backlog");
}
#[test]
fn a_field_only_mentioned_in_prose_reads_as_unset() {
let content = "# T\n\n## Description\n- **Due**: 2026-12-31\n\n## Metadata\n\n- **ID**: x\n";
assert_eq!(parse_ticket_field(content, "Due"), "_Not set_");
}
#[test]
fn a_field_lookup_needs_the_metadata_heading() {
// No section, no fields: there is nothing to anchor to.
assert_eq!(
parse_ticket_field("# T\n\n- **Owner**: alice\n", "Owner"),
"_Not set_"
);
}
#[test]
fn a_field_lookup_stops_at_the_next_section() {
let content = "# T\n\n## Metadata\n\n- **ID**: x\n\n## Notes\n\n- **Owner**: alice\n";
assert_eq!(parse_ticket_field(content, "Owner"), "_Not set_");
assert_eq!(parse_ticket_field(content, "ID"), "x");
}
/// Matching on a prefix, not a substring: a field name inside another field's
/// value is not that field.
#[test]
fn a_field_marker_inside_another_value_is_not_matched() {
let content = "# T\n\n## Metadata\n\n- **Tags**: mentions **Owner**: bob\n";
assert_eq!(parse_ticket_field(content, "Owner"), "_Not set_");
assert_eq!(parse_ticket_field(content, "Tags"), "mentions **Owner**: bob");
}
#[test]
fn setting_the_status_leaves_prose_that_looks_like_metadata_alone() {
let content = ticket_shadowing_its_own_metadata();
let updated = set_status_field(&content, "committed", "Shadow").unwrap();
assert!(
updated.contains("## Description\nThe current format is:\n- **Owner**: nobody\n- **Status**: backlog\n"),
"the description was rewritten:\n{updated}"
);
assert_eq!(parse_ticket_field(&updated, "Status"), "committed");
assert_eq!(updated.matches("**Status**: committed").count(), 1);
}
#[test]
fn setting_the_status_needs_the_field_in_the_metadata_section() {
// A Status line above the section is prose, so this is a ticket without the field.
let content = "# T\n\n## Description\n- **Status**: backlog\n\n## Metadata\n\n- **ID**: x\n";
assert!(set_status_field(content, "committed", "T").is_err());
}
/// SGR escapes removed, so a rendered cell can be measured as it lands on screen.
/// Test-only: production never measures a styled string, which is the point.
fn unstyled(text: &str) -> String {
let mut out = String::new();
let mut chars = text.chars();
while let Some(c) = chars.next() {
if c != '\x1b' {
out.push(c);
continue;
}
// Drop everything up to and including the 'm' that closes the sequence.
for c in chars.by_ref() {
if c == 'm' {
break;
}
}
}
out
}
#[test]
fn the_metadata_table_aligns_values_in_one_column() {
// The leading blank line is what the ticket template writes under the heading.
let rendered = render_metadata_table(
&[
"",
"- **ID**: abc",
"- **Created At**: 2026-08-20",
"- **Owner**: alice",
],
false,
);
assert_eq!(
rendered,
"ID abc\n\
Created At 2026-08-20\n\
Owner alice\n"
);
}
#[test]
fn a_long_field_name_widens_the_column_for_every_row() {
let rendered =
render_metadata_table(&["- **ID**: abc", "- **Handled By Team**: ops"], false);
assert_eq!(
rendered,
"ID abc\n\
Handled By Team ops\n"
);
}
/// The trap the ticket names: field names are coloured, unset values are greyed
/// and Priority carries a mark, so measuring the styled text would tilt the table
/// with colour on and not with it off.
#[test]
fn colour_does_not_change_the_alignment() {
let lines = [
"- **ID**: abc",
"- **Priority**: 2",
"- **Due**: _Not set_",
"- **Owner**: Ansho Rei",
];
let plain = render_metadata_table(&lines, false);
let coloured = render_metadata_table(&lines, true);
assert_ne!(coloured, plain, "colour produced no escapes at all");
assert_eq!(unstyled(&coloured), plain);
}
#[test]
fn a_non_ascii_field_name_is_measured_in_characters() {
// "Créé à" is 6 characters and 8 bytes, so a byte-width column pads it short
let rendered = render_metadata_table(&["- **Créé à**: oui", "- **ID**: abc"], false);
assert_eq!(
rendered,
"Créé à oui\n\
ID abc\n"
);
}
#[test]
fn a_non_ascii_value_leaves_the_column_alone() {
let lines = ["- **Owner**: 日本語", "- **ID**: abc"];
let rendered = render_metadata_table(&lines, false);
assert_eq!(
rendered,
"Owner 日本語\n\
ID abc\n"
);
}
#[test]
fn a_field_the_tool_does_not_know_still_gets_a_row() {
let rendered = render_metadata_table(&["- **ID**: abc", "- **Sprint**: 14"], false);
assert!(rendered.contains("Sprint 14"), "{rendered:?}");
}
#[test]
fn a_line_that_is_not_a_field_is_carried_through() {
let rendered =
render_metadata_table(&["- **ID**: abc", "a hand written note"], false);
assert_eq!(
rendered,
"ID abc\n\
a hand written note\n"
);
}
#[test]
fn the_priority_cell_carries_the_mark_and_the_stored_number() {
let rendered = render_metadata_table(&["- **Priority**: 2"], false);
let (glyph, _) = priority_mark(Priority::Level(2));
assert_eq!(rendered, format!("Priority {glyph} 2\n"));
}
#[test]
fn an_unset_priority_reads_as_unset_in_the_table() {
let rendered = render_metadata_table(&["- **Priority**: _Not set_"], false);
let (glyph, _) = priority_mark(Priority::Unset);
assert_eq!(rendered, format!("Priority {glyph} _Not set_\n"));
}
#[test]
fn a_section_rule_matches_the_width_of_its_name() {
let rendered = content_trim_colored("# T\n\n## Description\nbody\n");
// Eleven characters, not fourteen: the rule used to span "## Description"
assert!(
rendered.starts_with("Description\n───────────\n"),
"{rendered:?}"
);
}
#[test]
fn a_non_ascii_section_name_is_not_over_drawn() {
let rendered = content_trim_colored("# T\n\n## Résumé\nbody\n");
assert!(rendered.starts_with("Résumé\n──────\n"), "{rendered:?}");
}
#[test]
fn the_body_leaves_the_title_to_cmd_show() {
let rendered = content_trim_colored("# Only Once\n\n## Description\nbody\n");
assert!(!rendered.contains("Only Once"), "{rendered:?}");
// And no gap where it was
assert!(rendered.starts_with("Description"), "{rendered:?}");
}
#[test]
fn the_metadata_section_renders_as_a_table_inside_the_body() {
let content = "# T\n\n## Metadata\n\n- **ID**: abc\n- **Owner**: alice\n";
let rendered = content_trim_colored(content);
assert_eq!(rendered, "Metadata\n────────\n\nID abc\nOwner alice\n");
}
#[test]
fn a_section_after_metadata_still_renders() {
let content = "# T\n\n## Metadata\n\n- **ID**: abc\n\n## Notes\n\nafter\n";
let rendered = content_trim_colored(content);
assert!(rendered.contains("ID abc"), "{rendered:?}");
assert!(rendered.contains("Notes\n─────\n"), "{rendered:?}");
assert!(rendered.ends_with("after\n"), "{rendered:?}");
}
#[test]
fn a_level_in_range_parses() {
for level in 1..=5u8 {
let content = ticket_with_priority(&level.to_string());
assert_eq!(parse_priority(&content), Priority::Level(level));
}
}
#[test]
fn a_missing_or_unset_level_is_unset() {
assert_eq!(parse_priority("# T\n\n## Metadata\n"), Priority::Unset);
assert_eq!(parse_priority(&ticket_with_priority("_Not set_")), Priority::Unset);
assert_eq!(parse_priority(&ticket_with_priority("_None_")), Priority::Unset);
}
/// Distinct from unset on purpose: a typo must not read as "no priority".
#[test]
fn an_out_of_range_or_unparseable_level_is_invalid() {
for raw in ["0", "6", "42", "high", "-1", "1.5", "999999999999"] {
assert_eq!(
parse_priority(&ticket_with_priority(raw)),
Priority::Invalid,
"for {raw:?}"
);
}
}
#[test]
fn levels_sort_ahead_of_invalid_which_sorts_ahead_of_unset() {
let mut ranks = [Priority::Unset, Priority::Level(5), Priority::Invalid, Priority::Level(1)]
.map(|p| p.rank());
ranks.sort();
assert_eq!(
ranks,
[
Priority::Level(1).rank(),
Priority::Level(5).rank(),
Priority::Invalid.rank(),
Priority::Unset.rank()
]
);
}
#[test]
fn each_level_gets_its_own_glyph_and_colour() {
let marks: Vec<_> = PRIORITY_RANGE
.map(|level| priority_mark(Priority::Level(level)))
.collect();
let glyphs: std::collections::HashSet<_> = marks.iter().map(|(g, _)| *g).collect();
assert_eq!(glyphs.len(), marks.len(), "two levels share a glyph");
let colours: std::collections::HashSet<_> = marks.iter().map(|(_, c)| *c).collect();
assert_eq!(colours.len(), marks.len(), "two levels share a colour");
}
/// The glyph has to carry the level with colour off, which is how every pipe
/// and every opencode tool reads it.
#[test]
fn the_glyph_alone_distinguishes_every_state() {
let mut seen = std::collections::HashSet::new();
for state in PRIORITY_RANGE.map(Priority::Level).chain([Priority::Unset, Priority::Invalid]) {
let (glyph, _) = priority_mark(state);
assert!(seen.insert(glyph), "{glyph} is used for more than one state");
}
}
#[test]
fn the_fullest_mark_is_the_most_urgent() {
assert_eq!(priority_mark(Priority::Level(1)).0, "\u{25cf}\u{25cf}");
assert_eq!(priority_mark(Priority::Level(5)).0, "\u{25cb}\u{25cb}");
}
/// Every mark is the same width, or the column stops lining up.
#[test]
fn every_mark_is_the_same_width() {
let widths: std::collections::HashSet<usize> = PRIORITY_RANGE
.map(Priority::Level)
.chain([Priority::Unset, Priority::Invalid])
.map(|p| priority_mark(p).0.chars().count())
.collect();
assert_eq!(widths, std::collections::HashSet::from([2]));
}
/// The marks are built only from what frig already renders in this terminal:
/// the quadrant circles are in a quarter as many fonts and got substituted
/// from a fallback font that drew them oversized.
#[test]
fn marks_use_only_the_glyphs_known_to_render() {
let allowed = ['\u{25cf}', '\u{25d0}', '\u{25cb}', '\u{b7}', '?'];
for state in PRIORITY_RANGE
.map(Priority::Level)
.chain([Priority::Unset, Priority::Invalid])
{
for ch in priority_mark(state).0.chars() {
assert!(allowed.contains(&ch), "{ch:?} is outside the safe set");
}
}
}
#[test]
fn the_meter_empties_as_the_level_rises() {
let ink = |p: Priority| -> f32 {
priority_mark(p)
.0
.chars()
.map(|c| match c {
'\u{25cf}' => 1.0,
'\u{25d0}' => 0.5,
_ => 0.0,
})
.sum()
};
let mut previous = f32::MAX;
for level in PRIORITY_RANGE {
let current = ink(Priority::Level(level));
assert!(current < previous, "level {level} does not empty further");
previous = current;
}
}
#[test]
fn an_invalid_level_is_marked_wrong_not_unset() {
assert_eq!(priority_mark(Priority::Invalid).0, "??");
assert_ne!(
priority_mark(Priority::Invalid),
priority_mark(Priority::Unset)
);
}
#[test]
fn the_legend_covers_every_level_and_says_which_way_it_runs() {
let legend = priority_legend();
for level in PRIORITY_RANGE {
let (glyph, _) = priority_mark(Priority::Level(level));
assert!(legend.contains(glyph), "{glyph} missing from the legend");
assert!(legend.contains(&level.to_string()));
}
assert!(legend.contains("most urgent"), "direction not spelled out");
}
/// Green means title; a priority must not borrow it.
#[test]
fn the_ramp_avoids_green() {
for level in PRIORITY_RANGE {
assert_ne!(priority_mark(Priority::Level(level)).1, "green");
}
}
#[test]
fn every_colour_the_code_asks_for_exists() {
for colour in ["red", "cyan", "orange", "green", "grey", "magenta"] {
for colour in ["red", "cyan", "orange", "green", "grey", "magenta", "brightred"] {
assert!(!get_color(colour).is_empty(), "{colour} is not defined");
}
}
+63
View File
@@ -199,3 +199,66 @@ fn add_file_has_uuid_prefix() {
assert_eq!(parts[0].len(), 36);
assert_eq!(parts[0].chars().filter(|c| c.is_ascii_hexdigit()).count(), 32);
}
#[test]
fn add_writes_the_priority_field() {
let temp = TempDir::new().unwrap();
setup_worklane(&temp);
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.args(["add", "--title", "Urgent thing", "--priority", "1"])
.assert()
.success();
let files: Vec<_> = fs::read_dir(temp.child(".worklane").join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
.collect();
let content = fs::read_to_string(files[0].path()).unwrap();
assert!(content.contains("- **Priority**: 1"), "was {content:?}");
}
#[test]
fn add_leaves_priority_unset_when_omitted() {
let temp = TempDir::new().unwrap();
setup_worklane(&temp);
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.args(["add", "--title", "Whenever"])
.assert()
.success();
let files: Vec<_> = fs::read_dir(temp.child(".worklane").join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
.collect();
let content = fs::read_to_string(files[0].path()).unwrap();
assert!(content.contains("- **Priority**: _Not set_"), "was {content:?}");
}
/// Rejected at parse time, so no ticket is written at all.
#[test]
fn add_rejects_a_level_outside_the_range() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
// The `=` form, so a negative value reaches the validator instead of being
// read as a flag.
for bad in ["0", "6", "high", "-1"] {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["add", "--title", "Bad level", &format!("--priority={bad}")])
.assert()
.failure();
let stderr = String::from_utf8(cmd.assert().get_output().stderr.clone()).unwrap();
assert!(stderr.contains("priority must be"), "for {bad}: {stderr}");
}
let count = fs::read_dir(worklane.join("backlog")).unwrap().count();
assert_eq!(count, 0, "a ticket was written despite a bad level");
}
+80
View File
@@ -216,3 +216,83 @@ fn ls_survives_a_malformed_created_at() {
// Unparseable, so the timestamp column is dropped rather than printed raw
assert!(!stdout.contains("日本語"));
}
fn create_ticket_with_priority(worklane_dir: &std::path::PathBuf, title: &str, priority: &str) {
let slug: String = title.to_lowercase().replace(' ', "-");
let body = format!(
"# {}\n\n## Metadata\n\n- **ID**: 00000000-0000-0000-0000-00000000000{}\n\
- **Priority**: {}\n- **Tags**: test\n- **Due**: _Not set_\n\
- **Owner**: alice\n- **Status**: backlog\n",
title,
slug.len() % 10,
priority
);
let filename = format!("0000000{}-0000-0000-0000-000000000001_{}.md", slug.len() % 10, slug);
fs::write(worklane_dir.join("backlog").join(filename), body).unwrap();
}
#[test]
fn ls_sorts_by_priority_then_title() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket_with_priority(&worklane, "Zebra urgent", "1");
create_ticket_with_priority(&worklane, "Apple later", "4");
create_ticket_with_priority(&worklane, "Middle one", "2");
create_ticket(&worklane, "backlog", "No priority at all", "alice", "_Not set_");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog");
let stdout = get_stdout(&mut cmd);
let at = |needle: &str| stdout.find(needle).unwrap_or_else(|| panic!("{needle} missing"));
assert!(at("Zebra urgent") < at("Middle one"), "priority 1 must lead");
assert!(at("Middle one") < at("Apple later"), "2 before 4");
// Unset sorts last even though its title would come first alphabetically
assert!(at("Apple later") < at("No priority at all"), "unset must trail");
}
#[test]
fn ls_filters_by_priority_and_composes_with_status() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket_with_priority(&worklane, "Urgent one", "1");
create_ticket_with_priority(&worklane, "Lower one", "3");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["ls", "backlog", "--priority", "1"]);
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("Urgent one"));
assert!(!stdout.contains("Lower one"), "filter let a level 3 through");
// Same filter without a status, through the grouped listing
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(["ls", "--priority", "3"]);
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("Lower one"));
assert!(!stdout.contains("Urgent one"));
}
#[test]
fn ls_shows_a_mark_for_the_level() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket_with_priority(&worklane, "Top level", "1");
create_ticket_with_priority(&worklane, "Bottom level", "5");
create_ticket(&worklane, "backlog", "Nothing set", "alice", "_Not set_");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog");
let stdout = get_stdout(&mut cmd);
// Piped, so no escapes: the glyph is carrying the level by itself
assert!(!stdout.contains('\u{1b}'));
assert!(stdout.contains("\u{25cf}\u{25cf} "), "no full meter for level 1 in {stdout:?}");
assert!(stdout.contains("\u{25cb}\u{25cb} "), "no empty meter for level 5");
assert!(stdout.contains("\u{b7}\u{b7} "), "no unset mark");
// The raw number is not what the listing shows
assert!(!stdout.contains(" 1 "), "the digit leaked into the row");
}
+92
View File
@@ -393,3 +393,95 @@ fn show_searches_across_all_statuses() {
assert!(stdout.contains("Committed Task"));
assert!(stdout.contains("This is in committed."));
}
#[test]
fn show_renders_the_priority_mark_beside_the_number() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let filename = "abc123def456789012345678901234567890_prio.md";
fs::write(
worklane.join("backlog").join(filename),
"# Prio Ticket\n\n## Metadata\n\n- **ID**: abc123def456789012345678901234567890\n\
- **Priority**: 2\n- **Status**: backlog\n",
)
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Prio");
let stdout = get_stdout(&mut cmd);
// Mark for the eye, number still there for the file's sake
assert!(stdout.contains("\u{25cf}\u{25d0}"), "no mark in {stdout:?}");
assert!(stdout.contains("Priority"));
assert!(stdout.contains('2'));
// And the file itself is untouched
let content = fs::read_to_string(worklane.join("backlog").join(filename)).unwrap();
assert!(content.contains("- **Priority**: 2"));
}
#[test]
fn show_prints_the_title_once() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(
&worklane,
"backlog",
"Once Only",
"A description that does not name the title.",
"abc123def456789012345678901234567890",
"alice",
"2026-12-31",
"test",
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Once Only");
let stdout = get_stdout(&mut cmd);
assert_eq!(
stdout.matches("Once Only").count(),
1,
"title repeated in {stdout:?}"
);
// The rule under it is still the width of the title
assert!(stdout.contains("Once Only\n─────────\n"), "{stdout:?}");
}
#[test]
fn show_renders_the_metadata_as_an_aligned_table() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let filename = "abc123def456789012345678901234567890_table.md";
fs::write(
worklane.join("backlog").join(filename),
"# Table Ticket\n\n## Metadata\n\n\
- **ID**: abc123def456789012345678901234567890\n\
- **Created At**: 2026-08-20 15:51:01\n\
- **Owner**: alice\n\
- **Status**: backlog\n",
)
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Table");
let stdout = get_stdout(&mut cmd);
// Every value starts in the same column, sized by the longest field name
assert!(
stdout.contains(
"ID abc123def456789012345678901234567890\n\
Created At 2026-08-20 15:51:01\n\
Owner alice\n\
Status backlog\n"
),
"{stdout:?}"
);
// Display only: the file is still the markdown list it was
let content = fs::read_to_string(worklane.join("backlog").join(filename)).unwrap();
assert!(content.contains("- **Owner**: alice"));
}