Compare commits

..
11 Commits
Author SHA1 Message Date
Ansho ReiandClaude Opus 5 b28ddb9210 (eed7309) Die quietly on a truncated pipe, and bump to 0.3.1
Rust sets SIGPIPE to SIG_IGN at startup, so a write to a closed pipe returned
EPIPE and println panicked on it. `worklane ls | head -3` printed a panic and a
backtrace on stderr instead of three lines, which reads as a real fault and is
not what any other tool in a pipeline does.

main now restores the default disposition before any output, the same six lines
frig carries for the same reason. The cost is that a truncated pipe kills the
process with signal 13, so a shell reports 141 rather than 101. That is what
head and sort do, and it is now in the README next to the other exit codes.

The tests drop the read end rather than racing head for it, over a listing large
enough to exceed the 64 KiB a pipe holds, since a smaller one lands entirely in
the buffer and proves nothing. A shell pipeline into head is covered too, and
the exit codes for a real error and a usage mistake are pinned so the reset
cannot quietly change them.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:34:45 +02:00
Ansho ReiandClaude Opus 5 f557437f62 (277a527) Render the metadata section as an aligned table, and bump to 0.3.0
show printed the Metadata block as the markdown list the file stores, so with
seven fields the values did not line up and the block read as file contents
rather than as a summary. It now renders as two aligned columns: field names
left, values right. The file is untouched, this is display only.

content_trim_colored streamed one line at a time, so nothing ever saw the whole
section. The Metadata lines are now taken as a block, since the field column
cannot be sized until every name has been seen.

Column width is measured on the raw names, in characters, and padding is applied
before anything is styled. Measuring a coloured name counts its escape sequences
towards its width, which tilts the table with colour on and not with it off.
paint() is color_text() with the decision passed in, which is what lets a test
render both ways in one process and compare.

colorize_metadata is folded into the renderer, its only caller. A line in the
section that is not a field is carried through rather than dropped, so a hand
written note survives, and an unrecognised field still gets a row.

Plain columns, no border characters: nothing to degrade on a font that lacks
them, and the section rules already carry the only box drawing here.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:12:57 +02:00
Ansho ReiandClaude Opus 5 75fb2b3a6d (4b1e7e8) Print the ticket title once in show
cmd_show printed the resolved title with its rule, then content_trim_colored
printed the "# " heading again out of the file content, so every show output
carried the title twice.

The body now skips the heading, along with the blank line the template puts
under it so nothing is left where it was. cmd_show keeps the surviving copy and
colours it green, which is where the colour guideline puts a title.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:12:22 +02:00
Ansho ReiandClaude Opus 5 8b440593e2 (594c741) Measure heading rules on the displayed name
Section rules repeated the character for the byte length of the whole heading
line, so every rule ran three past its heading for the "## " prefix. The title
rule in cmd_show used byte length, which over-draws for a non-ASCII title.

Both now count characters of the text as displayed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:11:43 +02:00
Ansho ReiandClaude Opus 5 ab1dae098c (641e3d5) Scope metadata field lookup to the Metadata section, and bump to 0.2.1
parse_ticket_field searched every line of the file with contains, and
set_status_field rewrote the first line starting with the Status marker
wherever it sat. Tickets in this repo quote field markers in their
descriptions, so a description list shaped like metadata was read in place
of the real value and rewritten by mv, leaving the metadata stale.

Both now scan only the lines under the Metadata heading and match on a line
prefix rather than a substring. A file with no Metadata heading has no
fields, so mv reports the missing Status field instead of editing prose.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 16:38:35 +02:00
Ansho ReiandClaude Opus 5 2503f9aee9 (3b7edd7) Show priority as a glyph, and bump to 0.2.0
A bare digit in a listing is easy to skip over. Levels render as a
two-segment meter that empties as the level rises: ●● 1, ●◐ 2, ●○ 3,
◐○ 4, ○○ 5, with ·· for unset and ?? for a value outside the range.

Only ●, ◐, ○ and · are used, because they are what frig draws for its
status indicators and so are known to be in the terminal font. The first
cut of this used the quadrant circles ◕ and ◔, which are in a quarter as
many fonts, so terminals substituted them from a fallback that drew them
oversized and the column came out ragged. Two cells of a three-level ramp
gives five steps of ink, 2, 1.5, 1, 0.5, 0, without leaving that safe set.
Tests pin the safe set, the equal width and the monotonic emptying.

The mark carries the level on its own, because colour cannot. Output is
colourless whenever it is piped, which is how the opencode tools and every
script read it, and NO_COLOR turns it off in a terminal too. Colour only
accentuates: brightred, red, orange, cyan, grey, skipping green because
green means title.

The number counts up while the meter empties, since 1 is the most urgent.
That is the convention, but it reads as a bug unless written down, so it
is in AGENTS.md and in the legend.

Both the ramp and the legend come from priority_mark, and `ls --help`
prints the legend, since nothing in a listing explains a mark. brightred
is indexed like grey, for the same reason: it is the spelling that
renders.

Minor bump: two new flags, a new metadata field and a changed ls row,
covering dca0b61 and this ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:50:09 +02:00
Ansho ReiandClaude Opus 5 ddbd45e332 (dca0b61) Add priority as a ticket field
Priority lived in tags, as p1 to p3, which ls could neither sort nor
filter on, nothing validated, and a typo like P1 passed silently. ls
sorted by title only, so a backlog of any size gave no ordering signal.

Levels are 1 to 5 with 1 most urgent, matching what the tags meant.
Omitting the flag leaves the field _Not set_, like Due and Owner: there is
no implicit middle level, because a priority nobody chose is worse than
none. clap rejects anything outside the range before a ticket is written.

Priority parses to three states rather than two. A stored value outside
the range is Invalid, kept distinct from Unset, so a typo cannot read as
"no priority": it shows as ? and sorts just ahead of the unset tail.

ls sorts on priority and falls back to the old title sort, and --priority
filters, composing with the status filter in both the grouped and the
filtered listing. TicketItem becomes a struct, since a sixth tuple field
was past reading.

Migrated the 31 tickets already carrying p1 to p3 tags: the level moves to
the field and the tag is dropped.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:36:19 +02:00
Ansho ReiandClaude Opus 5 b7781a830c (482ff01) Grey unset Due and Owner in ls, and bump to 0.1.2
display_ticket_items printed both fields raw, so a ticket with no due date
showed _Not set_ in the default foreground. show already honoured the
guideline through colorize_metadata, leaving the listing as the one place
that ignored it. Reuses is_unknown_value rather than matching the markers
a second time.

Grey is indexed colour 8 in the 256-colour form. Two SGR spellings were
tried against a real terminal and both read as white: 90 leans on the
palette's bright-black slot, and 37 can sit right on top of the default
foreground. \x1b[38;5;8m is byte for byte what crossterm emits for
ratatui's Color::DarkGray, which is the grey frig and pantop already use
for dimmed rows, so this is the spelling known to render here. Pinned by a
test and written down in AGENTS.md, since only an eye in a real terminal
would catch it drifting back.

Patch bump covering the three colour tickets, 9991698, 934bf1a and this
one, as one body of work: nothing new, three places where output did not
do what the guideline said.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:24:42 +02:00
Ansho ReiandClaude Opus 5 3abe8755c8 (934bf1a) Define magenta and keep bold markers when colour is off
colorize_line asked color_text for magenta, which get_color never
defined, so it returned an empty prefix: in a terminal the bold text got
a reset with no colour, and piped it lost the ** markers with nothing put
in their place. Every piped show and everything the opencode tools read
saw plain text where the ticket had emphasis.

Define magenta as the bold escape the guideline names, and leave the line
untouched when colour is off, because there the markers are the emphasis.
The scan is rewritten to hand back an unterminated run verbatim rather
than walking off the end, which used to drop the final character.

The scan now takes the enabled flag instead of asking for it, so both
paths are tested rather than only the one a test process happens to get.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:05:32 +02:00
Ansho ReiandClaude Opus 5 b6d0b55d4b (9991698) Respect NO_COLOR and non-capable terminals
should_use_colors only asked whether stdout was a terminal, so there was
no way to turn colour off in one, and it was re-evaluated on every
color_text call.

Honour NO_COLOR by the no-color.org rule, set and non-empty disables
whatever the value, with an empty value treated as unset so an inherited
one can be cleared. Treat TERM=dumb and an empty TERM as no colour.
Decide once in a OnceLock, since none of the three inputs change mid-run.

The decision itself is a pure function of its three inputs, so it is
tested without a pty. Verified under a real one as well: colour on by
default, absent with NO_COLOR=1, absent with TERM=dumb, present again
with NO_COLOR set to empty.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:04:41 +02:00
Ansho ReiandClaude Opus 5 3fcb0ddc0a Require a local tag alongside every version bump
Records the rule in the Version Bumps section: a bump carries a matching
annotated v<version> tag on the bump commit, kept local unless a push is
asked for. Tagged v0.1.1 on 8563218 retroactively, which was bumped
before the rule existed.

Docs only, so no bump and no tag for this one.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:01:56 +02:00
14 changed files with 1431 additions and 122 deletions
@@ -37,6 +37,7 @@ Add a new ticket to the backlog.
- `--tags` (or `-g`): Tags (comma-separated)
- `--due` (or `--due`): Due date in YYYY-MM-DD format
- `--owner` (or `-o`): Owner name
- `--priority`: Priority level, 1 (most urgent) to 5 (least). Unset if omitted
```bash
worklane add -t "Implement login" -d "Add user login page" -t login,auth -p "Design UI" "Build backend" "Write tests" --due 2026-06-01 --owner "ilya"
@@ -56,11 +57,15 @@ List tickets, optionally filtered by status.
**Valid statuses:** `backlog`, `committed`, `reviewing`, `done`
```
worklane ls # List all tickets
worklane ls backlog # List tickets in backlog
worklane ls done # List completed tickets
worklane ls # List all tickets
worklane ls backlog # List tickets in backlog
worklane ls done # List completed tickets
worklane ls --priority 1 # Only the most urgent, any status
worklane ls backlog --priority 2 # Composes with the status filter
```
Tickets are listed priority first, then by title. Tickets with no priority sort last.
### `worklane show`
Show the full details of a single ticket by UUID or title.
+11 -1
View File
@@ -76,6 +76,10 @@ export const add = tool({
owner: tool.schema
.string()
.describe("Ticket owner name. If omitted, defaults to the git user."),
priority: tool.schema
.string()
.describe("Priority level, 1 (most urgent) to 5 (least). Left unset if omitted.")
.optional(),
},
async execute(args: Record<string, any>, context: ToolContext) {
if (!args.title) {
@@ -109,6 +113,7 @@ export const add = tool({
if (args.tags) cmd.push("--tags", args.tags);
if (args.due) cmd.push("--due", args.due);
if (args.owner) cmd.push("--owner", args.owner);
if (args.priority) cmd.push("--priority", String(args.priority));
try {
return await run(cmd, context);
@@ -120,15 +125,20 @@ export const add = tool({
export const ls = tool({
description:
"List all worklane tickets. Optionally filter by status (backlog, committed, reviewing, done).",
"List all worklane tickets, sorted by priority then title. Optionally filter by status and by priority.",
args: {
status: tool.schema
.enum(["backlog", "committed", "reviewing", "done"])
.describe("Filter by status")
.optional(),
priority: tool.schema
.string()
.describe("Only show tickets at this priority, 1 (most urgent) to 5 (least)")
.optional(),
},
async execute(args: Record<string, any>, context: ToolContext) {
const cmd = args.status ? ["ls", args.status] : ["ls"];
if (args.priority) cmd.push("--priority", String(args.priority));
try {
return await run(cmd, context);
} catch (err: any) {
+13 -4
View File
@@ -8,7 +8,7 @@
## Ticket File Format
- Filenames: `<uuid_v4>_<slug>.md`
- Metadata fields parsed by `parse_ticket_field()`: `ID`, `Tags`, `Due`, `Owner`, `Created At`, `Status`
- Metadata fields parsed by `parse_ticket_field()`: `ID`, `Priority`, `Tags`, `Due`, `Owner`, `Created At`, `Status`
- Format: `**Field Name**: value`
- Ticket structure: `# Title` → `## Description` → `## Acceptance Criteria` → `## Implementation Plan` → `## Metadata`
- Comments stored in `.worklane/comments/<ticket_uuid>/<timestamp>.md` with `**Comment**`, `**Author**`, `**Time**` fields
@@ -33,22 +33,29 @@
### Color and Output
- Use `color_text()` helper for colored output — it respects `should_use_colors()` (terminal detection)
- Color codes are defined in `get_color()`: red (31), cyan (36), orange (33), green (32), grey (90)
- Color codes are defined in `get_color()`: red (31), cyan (36), orange (33), green (32), grey (38;5;8), magenta (1;35), brightred (38;5;9)
- Reset color with `\x1b[0m` after colored text
- Bold uses `\x1b[1;35m` (magenta bold)
- Always test color output works correctly in both terminal and pipe modes
- `quiet_broken_pipe()` runs first in `main`, restoring the default `SIGPIPE` disposition. A truncated pipe therefore kills the process with signal 13, which a shell reports as 141, instead of making `println!` panic. Do not wrap prints to handle write errors and do not reinstate `SIG_IGN`; the exit codes are documented in the README
### Color Guideline
- UUID → red (31)
- Status → orange (33)
- Timestamp → cyan (36)
- Title → green (32)
- Unknown values (`_None_`, `_Not set_`) → grey (90)
- Unknown values (`_None_`, `_Not set_`) → grey (38;5;8)
- Priority ramp → brightred (1), red (2), orange (3), cyan (4), grey (5). Green is deliberately absent: it means title
- Grey is indexed colour 8 in the 256-colour form, not SGR 90 or 37. Both of those failed on a real palette: 90 leans on the bright-black slot and 37 can sit on top of the default foreground. `\x1b[38;5;8m` is byte for byte what crossterm emits for ratatui's `Color::DarkGray`, the grey frig and pantop use for dimmed rows
### Code Organization
- Colorization functions (`colorize_line`, `colorize_metadata`, `colorize_ordered`, `content_trim_colored`) handle markdown formatting
- Colorization functions (`colorize_line`, `colorize_ordered`, `content_trim_colored`) handle markdown formatting
- `show` renders the Metadata section as a two column table via `render_metadata_table`, not line by line. Column width is measured on the raw field names in characters and padding is applied before anything is styled: measuring a coloured string counts its escapes towards its width. `paint()` is `color_text()` with the colour decision passed in, which is what lets a test render both ways in one process
- The title is printed once, by `cmd_show`. `content_trim_colored` skips the `# ` heading in the file content
- Rules under headings are measured on the displayed name in characters, never on the raw line or in bytes
- `resolve_ticket()` scans all status directories — it's the single source for ticket lookup by UUID prefix, title, or filename
- `parse_ticket_field()` handles extracting metadata values from markdown format
- Field lookup, read and write, is scoped to the lines under the `## Metadata` heading and anchored to the start of the line. Prose above it is free text: tickets in this repo quote field markers in their descriptions, and an unscoped search reads or rewrites those instead. `set_status_field()` carries the same scoping
### Ticket Resolution
- `resolve_ticket()` returns `(status, title, content)` tuple
@@ -68,4 +75,6 @@
- No bump for docs-only, tests-only or `--fixup` commits
- When one body of work spans several commits, bump once on the final commit rather than on each
- Bump `Cargo.toml` and the `worklane` entry in `Cargo.lock` together, in the commit that carries the bump
- Every bump gets a matching annotated tag, `v<version>`, on the bump commit — a bumped version is never left untagged
- Tag locally only; never push a tag unless asked
- `worklane --version` reports the crate version alongside the build sha, so the bump is what makes one release distinguishable from another
Generated
+2 -1
View File
@@ -1029,13 +1029,14 @@ dependencies = [
[[package]]
name = "worklane"
version = "0.1.1"
version = "0.3.1"
dependencies = [
"anyhow",
"assert_cmd",
"assert_fs",
"chrono",
"clap",
"libc",
"tempfile",
"uuid",
]
+2 -1
View File
@@ -1,6 +1,6 @@
[package]
name = "worklane"
version = "0.1.1"
version = "0.3.1"
edition = "2024"
[dependencies]
@@ -8,6 +8,7 @@ clap = { version = "4", features = ["derive"] }
anyhow = "1"
uuid = { version = "1", features = ["v4"] }
chrono = { version = "0.4", features = ["serde"] }
libc = "0.2"
[dev-dependencies]
assert_cmd = "2"
+15 -2
View File
@@ -6,8 +6,21 @@ Worklane is a local Kanban flow for agentic software development.
| Command | Description |
|---------|-------------|
| `worklane init` | Creates `.worklane/` with backlog, committed, reviewing, done directories |
| `worklane add` | Creates a ticket in backlog with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--owner` flags |
| `worklane ls` | Lists tickets, optionally filtered by `--status` |
| `worklane add` | Creates a ticket in backlog with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--owner`, `--priority` flags |
| `worklane ls [status]` | Lists tickets, sorted by priority then title. Optional positional status, and `--priority <1-5>` |
| `worklane show <id>` | Shows ticket by UUID prefix (8+ chars) or title substring |
| `worklane mv <id> --status <target> [-f]` | Moves ticket between statuses. Default: forward only, one stage at a time. `-f` bypasses both restrictions |
| `worklane comment <ticket> <body>` | Adds a comment to a ticket by UUID or title |
## Exit codes
| Code | Meaning |
|------|---------|
| 0 | Success |
| 1 | An error, such as no matching ticket or an ambiguous search |
| 2 | A usage mistake, such as an unknown flag |
| 141 | Output was piped to a reader that stopped early, for example `worklane ls \| head -3` |
141 is 128 + 13, the shell's way of reporting death by `SIGPIPE`. Worklane restores
the default signal disposition so a truncated pipe is quiet, the way `head` and
`sort` are, rather than printing a panic. A script using `set -o pipefail` will see
141 for a case that is not a failure, so guard for it there.
+29
View File
@@ -1,5 +1,25 @@
use clap::Parser;
use std::sync::LazyLock;
use crate::util::{PRIORITY_RANGE, priority_legend};
/// clap wants a `&str` with a long enough lifetime, and the legend is built from
/// the same ramp the listing uses rather than spelled out a second time.
static PRIORITY_LEGEND: LazyLock<String> = LazyLock::new(priority_legend);
/// Reject a level outside the range at parse time, so no command has to.
fn priority_level(raw: &str) -> Result<u8, String> {
match raw.parse::<u8>() {
Ok(level) if PRIORITY_RANGE.contains(&level) => Ok(level),
_ => Err(format!(
"priority must be a whole number from {} to {}",
PRIORITY_RANGE.start(),
PRIORITY_RANGE.end()
)),
}
}
/// What `--version` prints: the crate version and the commit it was built from.
///
/// The sha is the part that matters. Two binaries built weeks apart both call
@@ -51,12 +71,21 @@ pub enum Command {
/// Owner
#[arg(short, long)]
owner: Option<String>,
/// Priority, 1 (most urgent) to 5 (least). Left unset if omitted.
#[arg(long, value_parser = priority_level)]
priority: Option<u8>,
},
/// List tickets, optionally filtered by status
#[command(after_help = PRIORITY_LEGEND.as_str())]
Ls {
/// Filter by status (backlog, committed, reviewing, done)
status: Option<String>,
/// Only show tickets at this priority, 1 (most urgent) to 5 (least)
#[arg(long, value_parser = priority_level)]
priority: Option<u8>,
},
/// Show a ticket by UUID or title
+31 -7
View File
@@ -29,7 +29,11 @@ pub fn cmd_init(start: &Path) -> Result<()> {
Ok(())
}
pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()> {
pub fn cmd_ls(
status_filter: &Option<String>,
priority_filter: Option<u8>,
worklane_dir: &Path,
) -> Result<()> {
if let Some(status) = status_filter {
let status_path = worklane_dir.join(status);
if !status_path.exists() {
@@ -39,7 +43,7 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
));
}
let items = collect_ticket_items(&status_path)?;
let items = filter_by_priority(collect_ticket_items(&status_path)?, priority_filter);
if items.is_empty() {
println!("No tickets in '{}' status.", status);
@@ -57,8 +61,8 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
if !status_path.exists() {
continue;
}
let entries: Vec<_> = fs::read_dir(&status_path)?.filter_map(|e| e.ok()).collect();
let count = entries.len();
let items = filter_by_priority(collect_ticket_items(&status_path)?, priority_filter);
let count = items.len();
let label = if count == 1 { "ticket" } else { "tickets" };
println!(" [{}] {} {}", status.to_uppercase(), count, label);
}
@@ -73,7 +77,7 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
continue;
}
let items = match collect_ticket_items(&status_path) {
Ok(items) => items,
Ok(items) => filter_by_priority(items, priority_filter),
Err(_) => continue,
};
if items.is_empty() {
@@ -88,6 +92,17 @@ pub fn cmd_ls(status_filter: &Option<String>, worklane_dir: &Path) -> Result<()>
Ok(())
}
/// Keep only the tickets at `level`, or everything when no level was asked for.
fn filter_by_priority(items: Vec<TicketItem>, level: Option<u8>) -> Vec<TicketItem> {
match level {
Some(level) => items
.into_iter()
.filter(|item| item.priority == Priority::Level(level))
.collect(),
None => items,
}
}
pub fn cmd_add(
title: &str,
description: &[String],
@@ -96,6 +111,7 @@ pub fn cmd_add(
tags: &[String],
due: &Option<String>,
owner: &Option<String>,
priority: Option<u8>,
start: &Path,
) -> Result<()> {
let owner = match owner {
@@ -141,6 +157,7 @@ pub fn cmd_add(
## Metadata\n\
\n\
- **ID**: {}\n\
- **Priority**: {}\n\
- **Tags**: {}\n\
- **Due**: {}\n\
- **Owner**: {}\n\
@@ -168,6 +185,10 @@ pub fn cmd_add(
.join("\n")
},
id,
match priority {
Some(level) => level.to_string(),
None => "_Not set_".to_string(),
},
if tags.is_empty() {
"_None_".to_string()
} else {
@@ -273,8 +294,11 @@ pub fn cmd_show(search: &str, worklane_dir: &Path) -> Result<()> {
let (_status, title, content) = resolve_ticket(search, worklane_dir)?;
let ticket_uuid = parse_ticket_field(&content, "ID");
println!("{}", title);
println!("{}", "─".repeat(title.len()));
// The only title in the output: content_trim_colored used to print it a second
// time from the file content. Green per the colour guideline, and the rule is
// measured in characters so a non-ASCII title is not over-drawn.
println!("{}", color_text(&title, "green"));
println!("{}", "─".repeat(title.chars().count()));
println!("\n{}", content_trim_colored(&content));
if ticket_uuid != "_Not set_" {
+25 -2
View File
@@ -9,7 +9,28 @@ use command::*;
use handlers::*;
use util::*;
/// Die quietly when stdout is closed early, the way every other Unix tool does.
///
/// Rust sets `SIGPIPE` to `SIG_IGN` at startup, which turns a closed pipe into an
/// io error that `println!` panics on. So `worklane ls | head -3` printed a panic
/// and a backtrace instead of three lines, which is both alarming and easy to
/// mistake for a real fault. Restoring the default handler makes `| head` behave.
///
/// The cost is that a truncated pipe now kills the process with signal 13 rather
/// than returning a code, so `pipefail` sees 141 instead of 101. That is what
/// `head` and `sort` do, and it is recorded in the README.
fn quiet_broken_pipe() {
// SAFETY: setting a signal disposition to the default is always valid, and
// this runs before any thread is spawned.
unsafe {
libc::signal(libc::SIGPIPE, libc::SIG_DFL);
}
}
fn main() -> Result<()> {
// Before any output, so no write can beat it to a closed pipe.
quiet_broken_pipe();
let cli = Cli::parse();
let start = std::env::current_dir()?;
@@ -24,6 +45,7 @@ fn main() -> Result<()> {
tags,
due,
owner,
priority,
} => cmd_add(
&title,
&description,
@@ -32,11 +54,12 @@ fn main() -> Result<()> {
&tags,
&due,
&owner,
priority,
&start,
),
Command::Ls { status } => {
Command::Ls { status, priority } => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_ls(&status, &worklane_dir)
cmd_ls(&status, priority, &worklane_dir)
}
Command::Show { id } => {
let worklane_dir = find_worklane_dir(&start)?;
+887 -101
View File
File diff suppressed because it is too large Load Diff
+173
View File
@@ -0,0 +1,173 @@
use assert_fs::TempDir;
use assert_fs::fixture::{PathChild, PathCreateDir};
use std::fs;
use std::os::unix::process::ExitStatusExt;
use std::process::{Command, Stdio};
const BIN_NAME: &str = env!("CARGO_BIN_EXE_worklane");
/// What a truncated pipe costs: the process dies by signal rather than returning a
/// code, so a shell reports 128 + 13. Asserted here so the README and the code stay
/// honest about what `pipefail` sees.
const SIGPIPE: i32 = 13;
/// A pipe holds 64 KiB on Linux before a write blocks. Below that the whole listing
/// lands in the buffer, the writer never notices the reader is gone, and a test
/// proves nothing. Every ticket here is one `ls` row of roughly a hundred bytes.
const TICKETS: usize = 1200;
fn setup_crowded_board(temp: &TempDir) -> std::path::PathBuf {
let worklane = temp.child(".worklane");
worklane.create_dir_all().unwrap();
for dir in ["backlog", "committed", "reviewing", "done"] {
worklane.child(dir).create_dir_all().unwrap();
}
let backlog = worklane.path().join("backlog");
for i in 0..TICKETS {
let id = format!("{:08x}-0000-4000-8000-000000000000", i);
let title = format!("A ticket with a title long enough to fill a row {}", i);
fs::write(
backlog.join(format!("{}_ticket-{}.md", id, i)),
format!(
"# {}\n\n## Metadata\n\n\
- **ID**: {}\n\
- **Owner**: someone with a name\n\
- **Status**: backlog\n",
title, id
),
)
.unwrap();
}
temp.path().to_path_buf()
}
fn panic_text(stderr: &str) -> bool {
stderr.contains("panicked")
|| stderr.contains("failed printing to stdout")
|| stderr.contains("Broken pipe")
}
/// The reader closed before the writer finished: dropping the read end here is the
/// same thing `head` does when it has seen enough, without the timing luck.
fn run_with_stdout_dropped(dir: &std::path::Path, args: &[&str]) -> std::process::Output {
let mut child = Command::new(BIN_NAME)
.args(args)
.current_dir(dir)
.stdout(Stdio::piped())
.stderr(Stdio::piped())
.spawn()
.unwrap();
drop(child.stdout.take().unwrap());
child.wait_with_output().unwrap()
}
#[test]
fn ls_says_nothing_when_the_reader_goes_away() {
let temp = TempDir::new().unwrap();
let dir = setup_crowded_board(&temp);
let output = run_with_stdout_dropped(&dir, &["ls", "backlog"]);
let stderr = String::from_utf8_lossy(&output.stderr);
assert!(!panic_text(&stderr), "stderr was {stderr:?}");
assert_ne!(output.status.code(), Some(101), "panicked instead of dying");
assert_eq!(
output.status.signal(),
Some(SIGPIPE),
"expected death by SIGPIPE, got {:?}",
output.status
);
}
#[test]
fn show_says_nothing_when_the_reader_goes_away() {
let temp = TempDir::new().unwrap();
let dir = setup_crowded_board(&temp);
// A ticket carrying more comments than a pipe will hold, since the comment list
// is the longest thing show prints and the last thing it reaches.
let comments = temp
.path()
.join(".worklane")
.join("comments")
.join("00000000-0000-4000-8000-000000000000");
fs::create_dir_all(&comments).unwrap();
for i in 0..800 {
fs::write(
comments.join(format!("2026082{}_120000_{:06}.md", i % 10, i)),
format!(
"**Comment**\nA comment body long enough to be worth buffering, number {}.\n\n\
**Author**: someone\n**Time**: 2026-08-20 12:00:00\n",
i
),
)
.unwrap();
}
let output = run_with_stdout_dropped(&dir, &["show", "00000000-0000-4000"]);
let stderr = String::from_utf8_lossy(&output.stderr);
assert!(!panic_text(&stderr), "stderr was {stderr:?}");
assert_ne!(output.status.code(), Some(101), "panicked instead of dying");
assert_eq!(
output.status.signal(),
Some(SIGPIPE),
"expected death by SIGPIPE, got {:?}",
output.status
);
}
/// The real invocation, through a shell into `head`, which is how this was found.
/// Whether the writer gets far enough to notice is up to the scheduler, so this
/// asserts only what must hold either way: `head` gets its lines and nothing
/// alarming reaches stderr.
#[test]
fn a_shell_pipeline_into_head_prints_lines_and_not_a_panic() {
let temp = TempDir::new().unwrap();
let dir = setup_crowded_board(&temp);
let output = Command::new("sh")
.arg("-c")
.arg(format!("{} ls backlog | head -3", BIN_NAME))
.current_dir(&dir)
.output()
.unwrap();
let stdout = String::from_utf8_lossy(&output.stdout);
let stderr = String::from_utf8_lossy(&output.stderr);
assert_eq!(stdout.lines().count(), 3, "stdout was {stdout:?}");
assert!(!panic_text(&stderr), "stderr was {stderr:?}");
}
/// The reset must not touch anything else: a real failure still returns its code.
#[test]
fn real_exit_codes_are_unchanged() {
let temp = TempDir::new().unwrap();
let dir = setup_crowded_board(&temp);
let ok = Command::new(BIN_NAME)
.args(["ls", "backlog"])
.current_dir(&dir)
.output()
.unwrap();
assert_eq!(ok.status.code(), Some(0));
let missing = Command::new(BIN_NAME)
.args(["show", "no-such-ticket-anywhere"])
.current_dir(&dir)
.output()
.unwrap();
assert_eq!(missing.status.code(), Some(1));
let misuse = Command::new(BIN_NAME)
.arg("--bogus")
.current_dir(&dir)
.output()
.unwrap();
assert_eq!(misuse.status.code(), Some(2));
}
+63
View File
@@ -199,3 +199,66 @@ fn add_file_has_uuid_prefix() {
assert_eq!(parts[0].len(), 36);
assert_eq!(parts[0].chars().filter(|c| c.is_ascii_hexdigit()).count(), 32);
}
#[test]
fn add_writes_the_priority_field() {
let temp = TempDir::new().unwrap();
setup_worklane(&temp);
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.args(["add", "--title", "Urgent thing", "--priority", "1"])
.assert()
.success();
let files: Vec<_> = fs::read_dir(temp.child(".worklane").join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
.collect();
let content = fs::read_to_string(files[0].path()).unwrap();
assert!(content.contains("- **Priority**: 1"), "was {content:?}");
}
#[test]
fn add_leaves_priority_unset_when_omitted() {
let temp = TempDir::new().unwrap();
setup_worklane(&temp);
Command::cargo_bin(BIN_NAME)
.unwrap()
.current_dir(&temp.path())
.args(["add", "--title", "Whenever"])
.assert()
.success();
let files: Vec<_> = fs::read_dir(temp.child(".worklane").join("backlog"))
.unwrap()
.filter_map(|e| e.ok())
.collect();
let content = fs::read_to_string(files[0].path()).unwrap();
assert!(content.contains("- **Priority**: _Not set_"), "was {content:?}");
}
/// Rejected at parse time, so no ticket is written at all.
#[test]
fn add_rejects_a_level_outside_the_range() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
// The `=` form, so a negative value reaches the validator instead of being
// read as a flag.
for bad in ["0", "6", "high", "-1"] {
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["add", "--title", "Bad level", &format!("--priority={bad}")])
.assert()
.failure();
let stderr = String::from_utf8(cmd.assert().get_output().stderr.clone()).unwrap();
assert!(stderr.contains("priority must be"), "for {bad}: {stderr}");
}
let count = fs::read_dir(worklane.join("backlog")).unwrap().count();
assert_eq!(count, 0, "a ticket was written despite a bad level");
}
+80
View File
@@ -216,3 +216,83 @@ fn ls_survives_a_malformed_created_at() {
// Unparseable, so the timestamp column is dropped rather than printed raw
assert!(!stdout.contains("日本語"));
}
fn create_ticket_with_priority(worklane_dir: &std::path::PathBuf, title: &str, priority: &str) {
let slug: String = title.to_lowercase().replace(' ', "-");
let body = format!(
"# {}\n\n## Metadata\n\n- **ID**: 00000000-0000-0000-0000-00000000000{}\n\
- **Priority**: {}\n- **Tags**: test\n- **Due**: _Not set_\n\
- **Owner**: alice\n- **Status**: backlog\n",
title,
slug.len() % 10,
priority
);
let filename = format!("0000000{}-0000-0000-0000-000000000001_{}.md", slug.len() % 10, slug);
fs::write(worklane_dir.join("backlog").join(filename), body).unwrap();
}
#[test]
fn ls_sorts_by_priority_then_title() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket_with_priority(&worklane, "Zebra urgent", "1");
create_ticket_with_priority(&worklane, "Apple later", "4");
create_ticket_with_priority(&worklane, "Middle one", "2");
create_ticket(&worklane, "backlog", "No priority at all", "alice", "_Not set_");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog");
let stdout = get_stdout(&mut cmd);
let at = |needle: &str| stdout.find(needle).unwrap_or_else(|| panic!("{needle} missing"));
assert!(at("Zebra urgent") < at("Middle one"), "priority 1 must lead");
assert!(at("Middle one") < at("Apple later"), "2 before 4");
// Unset sorts last even though its title would come first alphabetically
assert!(at("Apple later") < at("No priority at all"), "unset must trail");
}
#[test]
fn ls_filters_by_priority_and_composes_with_status() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket_with_priority(&worklane, "Urgent one", "1");
create_ticket_with_priority(&worklane, "Lower one", "3");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path())
.args(["ls", "backlog", "--priority", "1"]);
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("Urgent one"));
assert!(!stdout.contains("Lower one"), "filter let a level 3 through");
// Same filter without a status, through the grouped listing
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).args(["ls", "--priority", "3"]);
let stdout = get_stdout(&mut cmd);
assert!(stdout.contains("Lower one"));
assert!(!stdout.contains("Urgent one"));
}
#[test]
fn ls_shows_a_mark_for_the_level() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket_with_priority(&worklane, "Top level", "1");
create_ticket_with_priority(&worklane, "Bottom level", "5");
create_ticket(&worklane, "backlog", "Nothing set", "alice", "_Not set_");
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("ls").arg("backlog");
let stdout = get_stdout(&mut cmd);
// Piped, so no escapes: the glyph is carrying the level by itself
assert!(!stdout.contains('\u{1b}'));
assert!(stdout.contains("\u{25cf}\u{25cf} "), "no full meter for level 1 in {stdout:?}");
assert!(stdout.contains("\u{25cb}\u{25cb} "), "no empty meter for level 5");
assert!(stdout.contains("\u{b7}\u{b7} "), "no unset mark");
// The raw number is not what the listing shows
assert!(!stdout.contains(" 1 "), "the digit leaked into the row");
}
+92
View File
@@ -393,3 +393,95 @@ fn show_searches_across_all_statuses() {
assert!(stdout.contains("Committed Task"));
assert!(stdout.contains("This is in committed."));
}
#[test]
fn show_renders_the_priority_mark_beside_the_number() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let filename = "abc123def456789012345678901234567890_prio.md";
fs::write(
worklane.join("backlog").join(filename),
"# Prio Ticket\n\n## Metadata\n\n- **ID**: abc123def456789012345678901234567890\n\
- **Priority**: 2\n- **Status**: backlog\n",
)
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Prio");
let stdout = get_stdout(&mut cmd);
// Mark for the eye, number still there for the file's sake
assert!(stdout.contains("\u{25cf}\u{25d0}"), "no mark in {stdout:?}");
assert!(stdout.contains("Priority"));
assert!(stdout.contains('2'));
// And the file itself is untouched
let content = fs::read_to_string(worklane.join("backlog").join(filename)).unwrap();
assert!(content.contains("- **Priority**: 2"));
}
#[test]
fn show_prints_the_title_once() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
create_ticket(
&worklane,
"backlog",
"Once Only",
"A description that does not name the title.",
"abc123def456789012345678901234567890",
"alice",
"2026-12-31",
"test",
);
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Once Only");
let stdout = get_stdout(&mut cmd);
assert_eq!(
stdout.matches("Once Only").count(),
1,
"title repeated in {stdout:?}"
);
// The rule under it is still the width of the title
assert!(stdout.contains("Once Only\n─────────\n"), "{stdout:?}");
}
#[test]
fn show_renders_the_metadata_as_an_aligned_table() {
let temp = TempDir::new().unwrap();
let worklane = setup_worklane(&temp);
let filename = "abc123def456789012345678901234567890_table.md";
fs::write(
worklane.join("backlog").join(filename),
"# Table Ticket\n\n## Metadata\n\n\
- **ID**: abc123def456789012345678901234567890\n\
- **Created At**: 2026-08-20 15:51:01\n\
- **Owner**: alice\n\
- **Status**: backlog\n",
)
.unwrap();
let mut cmd = Command::cargo_bin(BIN_NAME).unwrap();
cmd.current_dir(&temp.path()).arg("show").arg("Table");
let stdout = get_stdout(&mut cmd);
// Every value starts in the same column, sized by the longest field name
assert!(
stdout.contains(
"ID abc123def456789012345678901234567890\n\
Created At 2026-08-20 15:51:01\n\
Owner alice\n\
Status backlog\n"
),
"{stdout:?}"
);
// Display only: the file is still the markdown list it was
let content = fs::read_to_string(worklane.join("backlog").join(filename)).unwrap();
assert!(content.contains("- **Owner**: alice"));
}