Commit Graph
57 Commits
Author SHA1 Message Date
Ansho Rei f877e6dbf2 (c6a61b4) Resolve a board through a pointer file and a shared boards repo, and bump to 0.33.0 2026-09-01 17:41:05 +02:00
Ansho Rei 96cddc14ad (53ffb94) Run the command the prompt parsed, and redraw the board on what it wrote, and bump to 0.32.16
The prompt parsed a line and named what it resolved to. This is the half
that does it: the parsed command goes to the same cmd_* handler main.rs
hands it to, against the selected tab's own .worklane, with a Sink over a
buffer collecting what the handler says instead of stdout.

One dispatch table, not two. main.rs's match on Command is lifted into
`dispatch`, over the command, the start path and the sink, and both
callers go through it. A second copy in tui.rs would drift the first time
a command was added and would drift silently, since both halves go on
compiling; the match is exhaustive so a new verb cannot fall into an `_`
arm either. Only `tui` is matched outside it, in main, because the board
is that table's caller rather than an entry in it, and reached from the
prompt it is refused in those words.

Two things the board has to do that the CLI never had to. It reloads
unconditionally after a command returns rather than waiting for the
digest, so a reader does not watch their own mv take up to a poll
interval to appear, and either way, since a handler that failed part way
through has still written. And the selection is restored by uuid across
that reload: mv puts the card in another column, set --title renames its
file, and a filter can drop it out of view, so the slot is not the
ticket. Where the board cannot follow it, the notice says so and which
key shows it.

What the handler says is what the board reports, word for word. Notice
therefore holds as many lines as the command used, and notice_on_row is
the one rule for where they go: one line on the footer row where a copy's
notice has always gone, anything else as a box at the foot of the
columns. A box rather than more rows of footer, because a footer that
grew and shrank as notices came and went would reflow the columns on
every keypress. A handler that errors leaves the prompt open with the
line intact, the usual cause being an ambiguous id.

`without_escapes` in util.rs is the guard at the seam. A handler's own
output is plain because the sink is, but an error message is built with
color_text, which asks the process about its stdout and under the board
answers yes about a terminal the message is not going to; a ratatui
paragraph prints an escape rather than obeying it. That is 6d327df's
fault on a new path.

The merge tab is refused for now, resolved by index rather than by the
tab's name, which is a label two projects can share. Routing by the card
a command names is ebc5755.

Not done here, and both tracked: check with no criterion still reaches
ask_which_criterion and reads a raw-mode stdin, which is 6d37042's
criterion 4 and commented there; and check_blockers warns about a
dangling blocker with eprintln!, which reaches the alternate screen
because it never passes through dispatch's result, filed as c680e24.
2026-08-27 23:38:02 +02:00
Ansho ReiandClaude Opus 5 f16e2aba0c (3686dd6) Open a command prompt on the board with : and parse what is typed, and bump to 0.32.15
The board reads. Changing anything meant quitting it and retyping an id
that was already selected. So `:` opens a one line editor in the footer
and the line is a worklane command, spelled exactly as the shell spells
it.

This is the mode and the grammar check, not the doing. Enter tokenises
the line with split_line, prepends the binary's own name and hands the
arguments to the same Cli definition the shell reaches, so a flag added
to a command is typeable here the day it is added and no list of verbs
lives on the board to go stale. A line that resolves is named and the
prompt closes; a line that does not keeps the prompt open with the line
intact and clap's own message, cut back to what fits a row. Running it
is 53ffb94, and the notice and the `↵ check` key both say so rather than
reading like a move that happened.

The prompt owns the keyboard while it is open, the contract search_key
and picker_key already keep, and declines ctrl-c for the same reason
they do. A line that ends inside a quote never reaches clap, which is
what the splitter's Unclosed state is for. --help is caught, or clap's
page lands on the alternate screen the way an unsunk println! would.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-27 21:07:26 +02:00
Ansho ReiandClaude Opus 5 bf7d8e05d8 (54fde0b) Split a typed command line into arguments the way a shell does, and bump to 0.32.14
The command prompt reads one string and clap reads an argv, so a line has
to be tokenised before anything can parse it: `comment 1b78a24 the offset
was never passed` split on whitespace is five arguments and `comment`
takes two.

One pure function over the line and the cursor, in a module of its own
rather than in tui.rs. The rules are the shell's, because that is what
the prompt promises. Two answers a shell's own splitter does not owe
anybody come out of the same scan: what a half-typed line is still
inside, as a state to report rather than an error to raise, and which
argument the cursor is in with whether it begins one.

Nothing calls it yet. The prompt that will is 3686dd6, and the dead_code
allow on the module goes when it lands.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-27 20:13:01 +02:00
Ansho Rei 69bc2feef5 (fa5662a) Write handler output through a caller-supplied sink, and bump to 0.32.13 2026-08-27 08:13:32 +02:00
Ansho Rei e26e5893f7 (ca2a124) Add --actor-from-git beside every --actor, and bump to 0.32.8 2026-08-25 17:12:25 +02:00
Ansho Rei ab337ca7f8 (1f1b321) Record a move's reason in its history entry, and bump to 0.31.2 2026-08-25 10:38:04 +02:00
Ansho Rei 60b43a682e (a136d13) Draw the discarded column behind a three-state visibility rotation, and bump to 0.31.1 2026-08-25 03:33:38 +02:00
Ansho ReiandClaude Fable 5 c03f47c52d (f774a33) Record a campaign move in the history log, and bump to 0.30.0
assign was the only field writer without an entry: a ticket could leave one
campaign for another with nothing recording it. Kind gains Campaign, assign
gains the --actor flag the other four writers carry, and the entry is written
after the save and behind the no-change return, the rule every writer follows.

The entry records Campaign::name, the codename or failing that the title,
settled when the entry is written so a rename cannot change what an old entry
means. The uuid the field holds says nothing in a log line, and a before-uuid
the board no longer has reads _missing_, the way the Campaign field itself
renders a dangling one.

campaign is the longest mechanical label, so LABEL_WIDTH widens from 6 to 8
and every mechanical row moves two columns right, a deliberate output change
that makes this a minor alongside the new flag.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-08-24 15:49:50 +02:00
Ansho ReiandClaude Opus 5 f454d212a4 (d4ce964) Record status, owner and tag changes in a history log, and bump to 0.29.0
The comments directory was already an append-only log with one event
kind. It is now .worklane/history/<uuid>/, with the kind in the entry
and in the filename after the stamp, so a ticket says how it got where
it is and not only what was said about it.

mv, chown and set --tags each write an entry after their own save and
behind their own no-change return, so a refused or no-op edit records
nothing. --actor is on all four writers now. An old comments directory
is adopted on first access and a file with no marker reads as the
comment it is, so nothing is migrated or rewritten.

The log moves to src/history.rs, out of util.rs and handlers.rs, and
the card's counter counts comments only: a ticket that has moved three
times has not been talked about.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-24 13:19:09 +02:00
Ansho ReiandClaude Opus 5 a1bdb5df49 (87862df) Attribute an entry to WORKLANE_ACTOR, not to the git user, and bump to 0.28.0
Every comment the CLI wrote was attributed to the git user, so a board
several agents write to read as a list of things one human had done.
resolve_actor is now the single source: flag, then WORKLANE_ACTOR, then
get_git_user(), then unknown.

comment --owner is renamed to --actor with no alias, since it names the
writer of the entry and not the ticket's assignee, which is chown's.
add --owner and campaign add --owner still default to the git user.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-24 12:34:51 +02:00
Ansho ReiandClaude Opus 5 7126138d46 (0fd1ddc) Pick a tag in the tui, and bump to 0.27.1
The board could be cut by campaign and not by the axis `ls --tag` has answered
since 2f3796e. `t` opens a picker of every tag the board declares or carries,
and taking one filters every column to the cards carrying it, matched whole and
case sensitively the way the listing matches.

The picker is one piece of machinery over two lists rather than a second
picker. `PickerRow::key` is what made that cheap: a campaign is keyed by its
uuid and a tag by itself, both strings, so stepping over selectable rows,
keeping the highlight across a rebuild and taking a row with `enter` are
written once. Only the list and what the answer filters differ.

`Tab::campaign` became `Tab::filter`, an enum of whole, campaign or tag, with
`select_filter` its only writer. Picking either clears the other because they
are one field rather than because two setters remember to, which is also what
the shared frame slot needs: it holds one frame and can now only be asked to
name one thing.

The tag sections are declared above undeclared and neither is truncated, where
the completed campaigns are: a finished campaign is done with and that tail
only grows, while an undeclared tag is the row a reader most wants to see.
`campaign` and `campaigns` would have sat one under the other here the day the
second was invented.

The digest stamps `tags.md`, or a tag declared elsewhere would never reach an
open picker. The footer names the tag in its own colour beside `q board`,
because a tag draws no frame until 2a83bd4 and nothing else would say why the
cards are missing.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-24 10:03:29 +02:00
Ansho ReiandClaude Opus 5 3592584747 Edit a campaign's description, and bump to 0.27.0
`campaign set` reached the title and the codename, so the description a
campaign was filed with was the description it kept: fixing a typo in the
one field nothing could edit meant a hand edit of the file, or refiling the
campaign and reassigning every member.

Both halves arrive together, which is why d637288 left this out rather than
adding the flag. `campaign set --description` replaces the section and
`campaign append --description` adds a paragraph to it, because a `set` with
no `append` is the half that is easy to reach for and wrong: replacing a
description to add a sentence is how the rest of it gets lost.

`append` is a campaign's own subcommand rather than the top-level one, which
resolves a ticket. `resolve_in`'s tiers are the same over both directories,
so one positional naming either object could resolve in each with nothing
but a flag to say which was meant, and it would make a liar of the
explanation `resolve_ticket` gives a ticket search that names a campaign.

The section is the `DESCRIPTION` entry and the surgery is
`set_section_body`, `append_section_body` and `Section::normalise`, not a
copy scoped to campaigns. `SECTION_ORDER` needs no campaign variant: a
campaign holds one section where a ticket holds four, and the followers a
campaign does not have are simply not in the file, so its description
anchors against `## Metadata`, where `campaign_body` writes it.

Still no `--clear`, and that is now a decision rather than a deferral: a
campaign's description has no cleared form, so an empty `--description ""`
is a paragraph break here as it is everywhere else, and the refusal for an
all-blank value says there is nowhere to go back to instead of naming a flag
that does not exist. `replaced_items` and `appended_items` hold that check
once for both objects, with the way out as the caller's argument.

The section refusal no longer says "Ticket", since a campaign reaches it
too.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-24 04:53:49 +02:00
Ansho ReiandClaude Opus 5 dd2b457bff (9b7fa7d) Expand the campaign frame with enter
Three rows of prose was the right default and the wrong ceiling. enter
while the frame holds the selection gives it half the board, enter again
gives the rows back, and pgup and pgdn go on doing what they do against
whichever height it is at.

Half of what the frame and the columns divide, which is the screen less
the tab row and the footer. Half rather than most of it for the same
reason the frame is not an overlay: the columns below are the campaign's
members, and a reader inspecting the campaign has to go on seeing what
it is made of. So `Chrome::campaign` is an `Option<FrameSize>` rather
than a bool and `campaign_rows` takes a height, resolved in `frame_rows`
because that is the one place that already has an area to take a share
of, which keeps `Chrome` itself pure.

Bounded at both ends, and the upper bound is the one that matters:
`Constraint::Min(COLUMN_MIN_ROWS)` would take rows back from a frame
that asked for too many, silently, and the frame's own measurement would
then disagree with what is drawn. Floored at the collapsed height, since
expanding must never shrink the frame, so a board too short to divide
gives the collapsed height back rather than one nothing measured. Swept
over every height from 4 to 60, tabbed and not.

q does not gain a layer and the arrow keys do not take the height back.
The expanded frame is the frame at its other height, not a thing laid
over the board, so q goes on taking the campaign filter off from either
and enter is the only key that undoes what enter did. The height
outlives the selection for the same reason: it is a view of the campaign
the reader chose, so the columns stay short with the selection on a
card. `dismiss` and `select_card` are untouched, and two tests pin that.

`enter` routes through `Board::toggle_focused` rather than in the
`main.rs` arm, the rule `dismiss` and `scroll_page` follow. It was inert
on the frame for free before, because `Tab::selected` hands back nothing
there and `toggle_detail` had nothing to open; that answer is now the
thing in the way, and AGENTS.md and `Tab::selected`'s doc are amended
rather than left describing the key by what it used to do.

The toggle re-clamps the frame offset through `scroll_frame(0, screen)`.
A taller viewport has a smaller last offset, so where the reader was can
end up past the end of the frame they just asked for, and the next pgup
would count down from a number the frame never showed.

Criterion 13 is not done: 2a83bd4 has not landed, so there is no tag
frame to give a second height to. What it inherits is on the ticket, and
all of it is generic rather than campaign-specific.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-24 03:08:39 +02:00
Ansho ReiandClaude Opus 5 af1ef1f97f (ebad2fa) Scroll the campaign description in the frame above the board
The frame showed the opening line of a description and the rest was only
readable through `campaign show`, which means leaving the board. It now
holds three rows of prose and pages through the remainder on `pgup` and
`pgdn`, reached by going up past the top card of a column.

Four decisions rather than four edits:

`section_prose` replaces `section_opening`. The campaign file is only in
hand while the campaigns directory is being read, so that read carries
the whole description and `CampaignRow::summary` takes the picker's one
line back off it. Two fields, one cut from the other, would be two
strings free to come from different reads of the same file.

`CAMPAIGN_PROSE_ROWS` is a constant. Fitting the frame to the
description would resize every column whenever the filter changed, so
the height is fixed at three rows and scrolling covers the rest. Two
more rows of cards spent than the one row cost.

`Focus` is the third place the selection can be, held on `Tab` beside
the filter and the new `frame_offset`. Every key that acts on a card
answers for it: `enter` is inert because `Tab::selected` hands back
nothing there, `left` and `right` are inert because the frame spans the
board, and `y` copies the campaign's short id, so `y copy id` means the
id of the selected thing in every state. No card is drawn reversed while
the frame holds the selection, since that highlight is what says which
ticket a key is about. The frame is out of reach from under an open
ticket, where up and down step through tickets and the overlay follows.

`Board::scroll_page` holds the precedence, not the `main.rs` arm: an
open ticket keeps both keys whatever holds the selection behind it, the
rule `dismiss` follows for the same reason. The page indicator, the
step and the clamp are the overlay's `page_indicator`, `scroll_step` and
`last_offset`, so the two places a reader presses these keys behave the
same. The indicator sits beside `q board` rather than up beside the
title, which would shorten a long campaign name whenever its
description grew.

Criterion 11 is not done: 2a83bd4 has not landed, so there is no tag
frame to give the same treatment. The model it inherits is in place and
named on the ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 17:47:09 +02:00
Ansho ReiandClaude Opus 5 239d951b8c (9688d34) Add tags set, and bump to 0.26.0
A tag declared with the wrong annotation was stuck with it, which is 32e98ab's
hole arriving before the writer rather than after. The campaigns entry on this
board was already in that state: it reserved the singular for the campaign
command, and stopped being true the moment that tag was rolled in.

`worklane tags set <tag> --annotation` replaces the whole annotation.
`--annotation` is required, so a bare call is a usage error rather than a
silent no-op, and an empty one writes the placeholder, which is why there is
no `--clear`. `add` and `set` refuse what the other is for, each naming the
other, so which one wrote a line is never a question of which was typed.

No `--force`: a codename is guarded because a campaign is addressed by it,
where an annotation is prose written to be revised. No rename: the tag is the
key, so changing it means rewriting the Tags field of every ticket carrying
it.

`report` grew `report_in`, which takes the colour. `report` paints its subject
green and green means title, so a tag could not reuse it: a tag is drawn in a
`TAG_COLORS` slot or it is drawn wrong. Same wording, decision passed in,
which is the trade `paint` makes with `color_text`.

The no-op compares the rendered file rather than the annotation, the way
`apply` compares content for a ticket field.

`tags set` takes a tag the board already has, so it joins the new
`TAG_NESTED_COMMANDS` and gets a fish rule offering `worklane tags`; `tags
add` stays ruleless in `TAG_NEW_COMMANDS`. The guard now names both lists, so
the next tag positional has to pick one.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 16:09:03 +02:00
Ansho ReiandClaude Opus 5 f515d69930 (1db02e5) Give the board a tags file, and bump to 0.25.0
The board carried twenty-four tags and defined none of them. `campaign` and
`campaigns` were both on it, one ticket each side, and nothing on disk could
have caught that.

`.worklane/tags.md` is the vocabulary: one level-two heading per tag, its
annotation as the prose under it, alphabetical by byte so a near-duplicate
lands next to what it duplicates. `worklane tags add <tag> --annotation`
writes it, `init` creates it empty, and `tags add` creates it on demand for a
board that predates it.

Declaring a tag tags no ticket, and tagging a ticket declares nothing. The
counts stay derived from the status directories, so the file and the board can
disagree; reporting that disagreement is 9564ac9.

`tags` becomes a group with an optional subcommand. The bare form is still the
listing, byte for byte, because the shipped fish completion calls it that way
to fill in `ls --tag`; `tags ls` is the same arm.

Every write re-renders the whole file from the parsed vocabulary rather than
splicing one section, which is why an unreadable file is an error in
`TagIndex::load` where an unreadable campaigns directory is an empty index:
empty here would mean erased.

`no_tag_taking_option_is_missing` used to panic on any tag positional. It now
allows what `TAG_NEW_COMMANDS` records, which is `tags add` alone: the tag it
takes does not exist yet, so completing it from `worklane tags` would offer
exactly the values it refuses.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 15:47:05 +02:00
Ansho ReiandClaude Opus 5 b1dbf3ed75 (4e4d88d) Split and search the campaign picker, and bump to 0.24.2
One flat list ordered by title put the completed campaigns among the open
ones forever. The tail only grows, so on a board that has run for a while
the campaigns worth picking were pushed towards the bottom of the box and
eventually off it, and nothing in the picker helped find one.

The rows are now two sections, open above completed, with completed by
Created At newest first and truncated to a couple behind a grey line
naming how many older ones are hidden. `/` starts a query, the key that
already searches the board's cards, filtering case insensitively on short
id, codename and title, and a query turns the truncation off: the
campaign a reader is searching for is exactly the one it hid.

`picker_list` is the one place that decides what a row is, so `Picker::row`
counts drawn rows and `stepped_picker_row` walks past the headings and the
truncation line rather than stopping on one. The highlight is placed by
uuid, the answer `Tab::campaign` already gives for the filter, so typing,
clearing the query and a tick that finishes a campaign all move it with its
campaign instead of leaving it at a number that now names another.

Every campaign's standing is settled at reload, counted by `standings_of`
in one pass over the cards the reload already holds rather than the walk
per campaign `campaign ls` pays. `Tab::standing` goes with it: the frame
reads the row's, since two counts of one number are two numbers free to
drift.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 15:10:49 +02:00
Ansho ReiandClaude Opus 5 11145b228e (c092ea7) Ship the opencode tool definitions with the binary, behind install-tool
`.opencode/tools/worklane.ts` was the second agent asset and the only one
that existed nowhere but a checkout. `cargo install` places binaries and
nothing else, so anyone who installed worklane got the skills and never the
tools, and the copy that did exist was reachable only from this repo. It is
now `assets/TOOL.ts`, embedded with `include_str!` like every other asset,
and `install-tool` writes it where opencode looks.

Its own command rather than a flag on `install-skill`, because the two
artifacts are not alike. A skill is inert markdown and one path serves both
agents. The tool is executable TypeScript and serves one: Claude Code has no
directory it scans for a tool definition, `claude mcp add` is the only way a
tool enters its list, and its plugin system adopts agents, hooks, monitors,
workflows, output-styles and themes and nothing named tools. Reaching it
would mean an MCP server, which is a different artifact and not this file.
So somebody on Claude Code takes the documents and never the wrapper, which
is the choice this command exists to give them.

The path was measured rather than guessed, as the ticket asked. 1.15.10
loads `~/.config/opencode/tool/` and `~/.config/opencode/tools/` both: each
was served in turn from a directory outside any project and
`/experimental/tool/ids` came back with all eleven worklane tools. Singular
is the target, the spelling opencode's own documentation puts first the way
it writes `agent(s)` and `skill(s)`. `tools_root()` follows
`XDG_CONFIG_HOME` where `skills_root()` does not, because opencode's config
root is an XDG path and `~/.claude` is not; `opencode debug paths` reports
`$XDG_CONFIG_HOME/opencode` with it set. An empty value counts as unset, the
convention `colors_wanted` already follows.

`opencode_tool_dir` takes both variables as arguments for the reason
`colors_wanted` does: a threaded test binary cannot mutate the process
environment to reach one branch at a time.

The file name is load bearing and now pinned by a test. opencode builds each
tool id as the file name then the export, so `worklane.ts` plus eleven
`export const` lines is what makes them `worklane_add` through
`worklane_uncheck`. Renaming the file renames every tool and every
permission rule naming one.

The closing line is not the skills' "on their next session". opencode reads
its config once at startup and never reloads it, so a running one keeps the
tools it began with and the honest instruction is to restart it.

Nothing else has to be installed, which is worth saying because the file is
executable and reads as though it wants a toolchain. Criterion 6 asked the
command to name the plugin package and Bun as runtime requirements and both
are wrong: a copy in a project with no `node_modules` above it registered
all eleven tools on a machine with no `bun` on `PATH`. opencode is a Bun
binary and the import resolves inside it. The message says the opposite, and
the reasoning is on the ticket.

`install_each` is the outcome loop both commands now share, with the
compare-and-refuse invocation passed in: that line is the only part of an
outcome that has to name the command it came from. What each command says
after the loop stays with the command.

`every_tool_the_wrapper_exports_is_a_real_subcommand` guards the direction
that breaks at call time, a tool wrapping a command that has been renamed or
dropped. Deliberately not the reverse: the wrapper has no tool for `relate`,
`campaign`, `assign` or `tags`, so an agent holding the tools cannot reach
campaigns or relations at all, and a test asserting that gap would fail on a
decision nobody has taken rather than on a mistake. Its own ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 14:14:14 +02:00
Ansho ReiandClaude Opus 5 72dbdec2ec (d637288) Add campaign set, and bump to 0.21.0
`campaign add --codename` was the only writer of the field, so a campaign
already on the board could not be given one without editing the file by
hand -- which is every campaign filed before 0.20.0.

A `campaign set`, not a flag on something narrower: the file has more than
one editable thing, and the moment somebody wants to fix a typo in a title
there would be a second command to design. It carries `--title`, which
renames the file the way `set --title` does, and `--codename`, through the
same parser `campaign add` takes. Built out of `set`'s own parts --
`set_title`, `apply`, `report`, and the whole-file no-op comparison -- so
nothing about writing a field lives twice.

The codename goes through `set_or_insert_metadata_field` rather than
`set_metadata_field`: a campaign filed before the field existed has no such
line, and those are exactly the campaigns this is for. That exposed a
second thing -- `Codename` was not in `METADATA_ORDER`, so an inserted line
landed at the end of the block while `campaign_body` writes it under the
ID, two shapes of one file. It is in the list now, directly after ID.

`save_ticket` split into `save_entry` with `save_ticket` and
`save_campaign` as named wrappers, so a campaign gets the same write-then-
rename a ticket has rather than a second copy of it. `write_then_replace`
and `find_entry_file` take the noun, so a failure says "campaign" where it
is one.

No `--description`, filed as 32e98ab: `set` and `append` are a pair for a
prose section, and replacing a description with no way to add a paragraph
is the half that loses the rest of it. No `--owner` and no `--clear`, each
for a reason recorded on the ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 12:22:59 +02:00
Ansho ReiandClaude Opus 5 528566d103 (61879a4) Surface campaigns on the board, and bump to 0.20.0
A card label and a frame, not a campaign tab. A tab had to say what its
columns are, and a campaign groups across the flow rather than within one
status, so the answer is the four columns filtered: a filter on the board
it already has, not a fifth tab.

So a card names its campaign on the label row, before the tags, marked ~
and bold, and the row drops the tags whole before it drops the campaign.
`c` opens a picker; taking a campaign filters every column to its members
and draws a frame above them carrying the id, the codename, the name, the
opening line of the description and the standing. The standing comes from
the columns, since while a campaign is selected the columns are its
members. `q` takes off one layer at a time: the overlay, the filter, the
board.

The label needs something to say, which the stored uuid is not, so
campaigns gained `Codename`: one word, `v1` or `beaver`, written by
`campaign add --codename` and validated at parse time. `campaign ls`
prints it and `resolve_in` gained an exact-codename tier above the uuid
prefix, or it would be a field you can read and cannot type. Only
campaigns carry the field, so the tier is empty for a ticket and ticket
resolution is unchanged.

The campaigns index is read once per project in `columns_of`, on the pass
that already builds the cards, and `digest` now watches the campaigns
directory: without it a campaign filed elsewhere never reached the picker.
`frame_rows` grew a row, so the two bools deciding the geometry became one
`Chrome` and the row indices are named.

Left out and filed as d637288: nothing can give a codename to a campaign
that is already on the board.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 12:09:07 +02:00
Ansho ReiandClaude Opus 5 c65e1b4ed7 (55ee6e3) Complete campaigns and tags, and bump to 0.19.0
Every argument naming a campaign or a tag fell through to nothing: `campaign
show <TAB>`, `assign <TAB>`, `ls --campaign <TAB>` and `ls --tag <TAB>`. Neither
value had a listing a completion could parse.

`campaign ls --ids` is the same flag and the same two fields as `ls --ids`,
since it answers the same question about a different object. It skips the member
counting the decorated listing does, because `members()` reads every ticket on
the board and the caller is a shell on a keypress, and it prints nothing on an
empty board where the decorated listing prints a sentence.

Tags get a command rather than a mode on `ls`. `ls --tag <tag>` answers what
carries a tag and cannot answer what tags exist, which is the question a
grooming sweep starts from, and a `--tags` beside a `--tag` is one letter from a
filter that means something else. `worklane tags` prints the tag, a tab and the
count, alphabetical and case sensitive like the filter, so `bug` and `Bug` list
separately and land next to each other. assets/PLAN.md used to tell the agent to
count the vocabulary with a `show` per ticket; it now points here.

The fish half gains `__worklane_nested_arg_of`, which matches a parent and a
child, because `campaign show <TAB>` and `chown alice <TAB>` sit at the same
token count and the two counting helpers cannot tell them apart.

It also gains `__worklane_command_is`, which fixes a leak the campaign and tag
rules would have joined. A bare `complete -c worklane -l tag` does not only
complete that option's values, it tells fish the whole tool accepts `--tag`:
`worklane init --<TAB>` offered `--blocked-by`, `--regression-of`,
`--relates-to` and three others. `relate`'s three were already leaking that way,
so all of them are scoped now rather than leaving a correctly scoped twin beside
a wrong one. `__fish_seen_subcommand_from ls` is not the scope to use, since
`campaign ls` is an `ls` fish has seen.

The honesty tests grow to five lists and one walker, `every_argument`, since
they differ only in the id they look for. Each asserts how many arguments it
found, so a walker that stopped finding them fails rather than passing every
assertion by never running it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 01:16:51 +02:00
Ansho ReiandClaude Opus 5 73ffcad733 Reformat with cargo fmt, and nothing else
Layout only, no behaviour and no wording. 161 hunks across 22 files, 98 of them
rustfmt joining a call or a message onto the one line it fits on. The config it
formats to, and how its four numbers were arrived at, is the commit before this
one.

Separate so that it is reviewable by not being read: nothing here is a decision,
and every decision is next door.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 00:23:04 +02:00
Ansho ReiandClaude Opus 5 cc5f9b8a46 (74904dc) Let a ticket field be cleared back to unset, and bump to 0.18.0
`set --clear <field>` is the one way to take a value away, repeatable, with
the field as a `ValueEnum` value: an unknown one is a usage error listing the
six that are not, and the shells complete them for free. Not a per-field
`--clear-due`, which is a flag per field to keep in step with the one it
undoes, and not an empty value, which is already a paragraph break for a
section and would make an accidentally empty variable a silent delete.

What goes back is what `add` writes for a field it was never given, through
the new `NOT_SET` and `NONE` constants and each section's placeholder, so a
cleared ticket and one filed without the field read the same. Sections are in
scope and go back through `clear_section_body` rather than
`set_section_body`: the latter runs its items through `Section::render`, which
would have written `- [ ] _No acceptance criteria provided._`.

Owner is `chown --clear <ticket>`, so the field keeps its one writer. The flag
carries the ticket because the ticket is chown's second positional and a bare
flag would land it in the user's slot for the handler to read back out, which
is hand-parsing what clap can state. It writes `_Not set_` rather than the git
user: `add` falls back to the git user because it is filing something new, and
an owner taken away says nobody owns this.

The empty-value error split in two rather than being reworded. `non_empty`
says only that the value cannot be empty, for the arguments with no empty
form; `clearable` names `--clear`, for the arguments whose field has one. One
message for both would have lied about `ls --tag`.

Replacing and clearing one field in a single call is refused rather than
resolved by whichever was applied last, and cleared fields are reported as
`Cleared due on '...'` beside `Updated priority on '...'`, since one list
would say `Updated` of a field that was emptied.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 00:04:28 +02:00
Ansho ReiandClaude Opus 5 373ba519b3 Add a worklane completions command, and bump to 0.17.0
Every argument worklane takes names a ticket, a status, a shell or a skill, and
the shell offered a directory listing for all of them. `completions <shell>`
prints a script for fish, bash, zsh, elvish and powershell, following what frig
does, which is where the shape of this comes from.

Two halves, because neither alone is enough. `clap_complete` generates the
structure from the clap definition, so a flag added to `command.rs` is completed
without anyone touching `completions.rs`, and fish gets a hand-written block
appended for what only the board knows. That block runs `worklane ls --ids` in a
command substitution, one run per keypress, 2.5ms in release on a board of
seventy-five tickets.

A status is a `util::Status` value enum now rather than a string, which was the
plan's third step and pays for itself three ways. clap refuses an unknown one at
parse time naming the four, so `cmd_mv`'s `valid_statuses` and the status half of
`cmd_ls`'s error are gone and exit 2 is what an unreal status gets, the bargain
`--due` and `--priority` already take. `status_dirs()` and `DONE` are derived
from `Status::ALL`, so the flow is written once. And clap emits the four for `mv
--status` itself. Only half free: the fish generator emits nothing for the
possible values of a *positional*, so `ls <status>` and `completions <shell>` are
listed in the appended half after all, read off the enums with `possible_values`
rather than by hand.

`ls --ids` is the machine-readable listing, and prints the short id, a tab and
the title rather than the id alone. Both readers want both fields: fish takes
what follows a tab as the description, which is what makes `worklane show <TAB>`
a list of titles instead of hex, and a script takes the id back with `cut -f1`.
It includes done, where the decorated listing leaves done out, because a
completion has to be able to name a finished ticket and `show` is most often
pointed at one. It skips a missing status directory rather than refusing, since
an error printed over a shell prompt is worse than no candidates, and the
listing still refuses one so a person can act on it. The filters all still
apply, and an unknown `--campaign` is still refused ahead of everything.

Adding the mode tipped `cmd_ls` over the boundary AGENTS.md names, so it takes an
`LsArgs`, the way `add` took `AddArgs`.

More than the criteria asked, since the cost of each was a name in a list:
tickets are completed for `set`, `append`, `relate`, `check`, `uncheck`, the
second argument of `chown` and `assign`, and `relate`'s three target flags, plus
the skill names read off `install::SKILLS`. The three lists are kept honest by
tests that walk the clap definition and fail on a ticket-taking subcommand
missing from them, or listed at the wrong position. Nested subcommands are not
walked: `campaign` is the only one, none of its three takes a ticket, and the
token counting could not tell them apart if one did.

Position is counted rather than inferred. `__worklane_first_arg_of` reads
`$tokens[2]` and the token count instead of `__fish_seen_subcommand_from`,
because `campaign ls` and `campaign show` are also an `ls` and a `show` that fish
has seen, and matching against the ticket list to find the position would run
worklane again inside the condition.

Files are turned off for the command and back on for `tui`, which is the one
argument that really is a path. The ticket said worklane takes no file arguments;
it takes those.

Campaigns and tags are completed nowhere, which needs a listing they do not have:
55ee6e3. And since fish runs whatever is on PATH, the completions are only as
current as the installed binary, an older one without `--ids` completing
nothing. That is in the README beside the install line.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 20:02:37 +02:00
Ansho ReiandClaude Opus 5 c437d87e9e (2f3796e) Add a --tag filter to worklane ls, and bump to 0.14.0
Tickets carry a Tags field, but ls could not select on it: finding what is
tagged bug meant reading the board. Step 1 of the plan was already done by
e41802b, which put tags: Vec<String> on TicketItem through parse_tags, so this
is the flag, the filter and the tests.

Whole values, not the field. parse_tags has already split and trimmed the
comma-separated field, so filter_by_tag compares against those values: --tag
bug is not answered by a ticket tagged bugfix, --tag "cli, filter" matches
nothing because the field as written is not itself a tag, and a ticket with no
tags matches none, however it spells it.

Case sensitive, which is the opinion the field already takes everywhere else.
tag_color draws Bug and bug in two colours because they are two tags to the
field, and a filter that folded them would list tickets carrying a tag nobody
asked for while hiding exactly the split a grooming sweep is looking for.

One tag per invocation. Several would have to decide between and and or, and
that decision is its own ticket, along with substring or regex matching and a
tag filter on the board.

A tag nothing carries lists nothing rather than being refused, deliberately
the opposite of --campaign. A campaign is an object that exists or does not,
so it is resolved before anything is read; a tag is free text with no
registry, and refusing an unknown one would mean maintaining a vocabulary the
format does not have. An emptied status keeps the message ls already gives
rather than one per filter naming what excluded them, which is what --priority
and --campaign already do.

The filter goes through filtered, the one call the three collect sites share,
so the counts are filtered by the same set as the rows. Every filter is an
Option and none asked for keeps everything, which is what makes them compose
in any combination. cmd_ls is now at four filters and the directory, two of
them adjacent &Option<String> parameters a caller can swap silently: left as
positionals rather than refactored mid-feature, with AGENTS.md recording that
the next filter takes an LsArgs struct the way add took AddArgs.

assets/PLAN.md said in as many words that there was no tag filter yet, so it
would have been actively wrong. It now says what --tag can and cannot answer:
it finds what is tagged bug, it does not enumerate the vocabulary, which is
the question a grooming sweep starts from. The README's ls row also gained
--campaign, which had never been documented there.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 14:54:50 +02:00
Ansho ReiandClaude Opus 5 0ce3fdb246 (0546fc5) Copy the selected id with y in the tui, and bump to 0.13.7
The board is where a ticket is found and the CLI is where it is acted on, and
the only thing joining them was seven characters retyped off the screen. y
reads as yank to the readers a keyboard board is for, and was the letter left
after q, esc, enter, space, hjkl, the arrows, pgup, pgdn, tab, backtab, d and
/ took theirs.

The mechanism was chosen against ssh, which is where a board is often read.
OSC 52 crosses the connection, because it is the terminal at the reader's own
end that owns the clipboard. A crate wants X11 and Wayland libraries at build
time and, on X11, hands the selection to the process that set it: copy an id,
quit, and the paste buffer is empty, which is precisely the flow this key
exists for. Shelling out to wl-copy, xclip or pbcopy is platform sniffing plus
a spawn, and does nothing where none of them is installed. crossterm 0.28 is
what ratatui 0.29 pins and ships no clipboard command, so the sequence and its
base64 are twenty lines in src/clipboard.rs, pinned on the RFC 4648 vectors.

The cost is recorded rather than hidden, in AGENTS.md under The Copy Key: a
terminal that ignores OSC 52 ignores it silently, and tmux needs set-clipboard
on. What clipboard::copy reports is whether the sequence was written, and the
footer says no more than that. There is no reply to read either, since the
query form is refused by most emulators.

What is copied is ticket.id, the seven characters the card already prints and
every command already resolves, decided by Board::copy_text so the string is a
question the suite can ask without a clipboard. None on an empty column: an
empty string would take away whatever the reader had there and give nothing
back. The project is left off even on the merge tab, since a second word would
have to be deleted out of every paste.

Board::copy_selected_id takes the clipboard as an argument, clipboard::copy
from the dispatch and a closure from a test, which is what makes the hit and
the refusal both drivable. A failure is said in the footer rather than
returned: there is nobody above it to handle one, and an error swallowed there
would look exactly like a copy that worked until the paste came out wrong.

Notice is the board's first channel for saying something in words, and it has
to be, because a copy leaves nothing on screen to look at. failed means
nothing reached the clipboard, so an empty column and a refused write are one
answer to the reader, both in brightred like the search's no match. It takes
the whole footer row, since a message squeezed in beside the keys would move
every key in it. Cleared by the next keypress rather than on a timer: no clock
on the board, no wakeup in the loop, and never in tick, which runs four times
a second. clear_notice goes ahead of search_key as well as the arms, because a
key typed into a query is still a key.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 14:36:09 +02:00
Ansho ReiandClaude Opus 5 37dbd722e0 (3b16540) Open a search with / in the tui, and bump to 0.13.6
Finding a ticket meant scrolling four columns and reading, which is what the
id and the title are for.

The real work was the input mode: every key in the dispatch was a single-shot
action, and a query needs one that swallows the keys bound to them. That is
Board::search_key, offered every key ahead of the action arms and reporting
what it took. With no prompt open it takes nothing, so every other state's
dispatch is unchanged. On Board for the reason dismiss is: the arm is not
reachable from a test.

ctrl-c is the one key the prompt declines, since a terminal application
always honours it. Every other control combination is swallowed and does
nothing: it must not type its letter, and it must not fall through either,
because the action arms match on the code alone and ctrl-d would reach the
arm bound to d.

first_match runs over every card in the visible columns, in reading order,
not the rows on screen: a query that answered differently on a tall terminal
and a short one is not a search, and the jump scrolls the match into view. A
hidden done column stays out, or the highlight would land on a ticket that is
not on the board. Id and title only, both lowercased.

The jump goes through select_at, extracted as the tail select_card already
used, so follow_selection scrolls the match's own column and refresh_detail
keeps an open overlay on it. Nothing calculates either a second way.

A hit closes the prompt; a miss keeps it open, marked in brightred beside the
query it is about, with the selection untouched, so the query can be
corrected in place rather than retyped from /. The mark clears on the next
edit. An empty query matches nothing rather than everything.

The prompt takes the whole footer row, since the key list it replaces
describes nothing that works while every key goes into the buffer. The real
terminal cursor sits after the query: ratatui shows it only for a frame that
asked, so it is also what says "you are typing" on an empty query. Both
closed footers now name / search.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 13:29:30 +02:00
Ansho ReiandClaude Opus 5 4502de7ee3 (e7612de) Close the detail overlay on q instead of quitting, and bump to 0.13.5
q set should_quit outright, so a reader who pressed it to put a ticket away
lost the whole board instead. That is not what q means anywhere else that
lays a document over a list, and esc two arms below already did the right
thing.

The rule is Board::dismiss: close what is open, quit when there is nothing
left to close. On Board rather than in the match arm because the dispatch in
main.rs is not reachable from a test, so a rule written there is a rule
nothing can check. q and esc now share one arm, since two arms carrying one
rule is how a later edit changes it for one key and not the other.

The footer is the other half. Its last slot answers the same question in
both states, how to get out, and with a ticket open the honest answer is
ctrl-c: it is the only key left that quits in one press. Going on saying
q quit there would be 1b78a24 in the other direction, a footer describing a
key by what it used to do. The close entry names both keys as enter/q close
rather than repeating close twice.

Criteria 3 and 7 live in a dispatch no test can reach, so
the_dispatch_gives_q_and_esc_one_arm_and_leaves_ctrl_c_quitting scans
main.rs for them, over whitespace-collapsed source so rustfmt cannot fail
it, the way util.rs is already scanned for colour_text callers.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 13:13:58 +02:00
Ansho ReiandClaude Opus 5 d5fb22cfd8 (16c2bed) Add a worklane-review skill, and bump to 0.13.0
install-skill now writes every document the binary carries, with an optional
name to narrow it. Requiring a name per document would mean a skill added
later never reaches anyone who already knows the invocation, which is the
drift the command exists to prevent. --print is the exception and requires
the name: a diff is against one document.

The review skill is its own document rather than a section of SKILL.md,
because the frontmatter description is the whole of what decides loading and
one description cannot name both "anything touching a ticket" and "only when
a review is asked for".

The reviewer never ticks a criterion and never moves the ticket. A tick is
the implementer's claim and unticking is the review disagreeing; one mark for
both loses the disagreement. mv belongs to whoever does the work.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 02:40:37 +02:00
Ansho ReiandClaude Opus 5 5b0bac9c2d (7bfb9fc) Add campaigns, a ticket container assigned through worklane assign, and bump to 0.12.0
There was no way to group the tickets that have to be finished together. A
goal such as a v1 release was either one ticket that could not describe its
parts, or a set of tickets with the goal restated in every description and
nothing tying them together.

A campaign is a file of its own under `.worklane/campaigns/`, with a title, a
description and metadata, and it sits in no status directory. Its state is
derived instead: open until every member is done. Deriving it means there is
no such thing as a done campaign holding an open ticket, and no second
forward-only ruleset beside `mv`'s. An empty campaign is neither open nor
done, since calling it done would make a container nothing has been filed
against the most complete thing on the board.

Membership is one field on the *member*, Campaign in the ticket Metadata,
written only by `assign`. The member list is deliberately not on the campaign:
that would put membership in two places and make one file that every
assignment edits, contended the moment two agents share a board. So `add`
gains no `--campaign` and neither does `set`.

`add` does not write the field either. Every ticket written before campaigns
existed has none, so the insertion path has to exist regardless, and leaving
it out of `add` means one path that is always exercised rather than two. That
is the Relations argument from 4179958, applied to a field instead of a
section. `set_or_insert_metadata_field` is the upsert and `METADATA_ORDER` is
its anchor list, the way `SECTION_ORDER` is `ensure_section`'s, so Campaign
lands beside Status rather than at the end and Status stays last. A file with
no Metadata heading is an error rather than an insertion, per 641e3d5.

The three tiers came out of `resolve_ticket` into `resolve_in`, shared by both
kinds. A campaign is addressed exactly the way a ticket is, and a second
resolver would be a second copy of the precedence rules to keep in step. Two
things fell out of that. `Found.dir` is the status for a ticket and empty for
a campaign, which is what drops the bracket from the ambiguity listing for
one. And `resolve_ticket` can now explain a search that names a campaign, so
`mv`, `show`, `chown` and everything else that takes a ticket give the same
reason instead of a bare "no ticket found" — one place rather than a check per
command. Only on the zero-match path, so an ambiguous ticket error is never
replaced by a complaint about a directory the caller never mentioned.

The stored value is the full uuid, per the same rule the Relations section
follows, and the title is resolved for display. `reference_cell` is now shared
between the two, so a dangling campaign and a dangling relation target are
both `_missing_` rather than each inventing a spelling. `Resolved` carries
what `content_trim` cannot render from the file alone: a struct rather than
two more parameters, so the next such field is one entry instead of an edit at
every call site.

`campaign show` lists done members, unlike `ls`, which leaves the done column
out of its listing. What is finished against what is left is the whole
question a campaign asks. `ls --campaign` is the other way round and keeps
every rule `ls` already has.

Deliberately out of scope. The derived progress figure is 1cb999f, now
recorded as blocked by this, since nothing here can compute it yet.
Unassigning needs a field cleared back to unset, which is 74904dc. And the
board gets neither a campaign tab nor a card marker: the detail view resolves
the field because it renders the body, and that is all. A marker would want a
read per reload and the four corners are already spent, which is the b8ce18c
reasoning; filed as 61879a4.

Twenty-four integration tests and eleven unit tests, covering assign,
reassign, the no-op, a dangling campaign, the ls filter, `mv` refusing a
campaign, insertion placement, and a handwritten section and unknown metadata
field surviving an assignment verbatim.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-22 00:52:57 +02:00
Ansho ReiandClaude Opus 5 3085b0226f (4179958) Add a Relations section for blocked by, regression of and relates to, and bump to 0.11.0
`relate` is the only writer of the section, the way `chown` is the only writer of
Owner: a relation names a target that has to be resolved to a uuid first, so `set`
and `append` are deliberately kept out of it. One flag per kind, so an unknown kind
is a usage error rather than a line refused on the way back out.

One direction is stored and the inverse is derived by a scan. `blocked by` goes on
the gated ticket, whose move `mv` now refuses while the target is not done, naming
every open blocker; `-f` bypasses it beside the backward and skipping moves. A
target that is not on the board warns and allows the move.

The rendered block is built outside `content_trim` and passed in, since half of it
comes from other tickets. The section is created on demand rather than by `add`, so
a ticket written before it existed gains it without being regenerated.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 22:33:12 +02:00
Ansho ReiandClaude Opus 5 b56b31d2d9 (f39b651) Add chown for the ticket owner, and bump to 0.10.0
The Owner field had no writer after `add`. It was folded into `set` in da03690
and comes out here as its own command, so no field is writable from two places,
the same reasoning that keeps status in `mv` alone.

`worklane chown alice 641e3d5`, user first, after Unix `chown`. That reverses
the ticket-first order `mv`, `comment` and `show` use, deliberately: the name
borrows the Unix association, so the argument order borrows it too.

The swap is left to resolution rather than checked for. Given `chown 641e3d5
alice` the second argument has to resolve as a ticket, and a bare username does
not, so the call fails on its own; a check on the first argument would only fire
where resolution already refuses and would stay silent on the one case it cannot
catch, a ticket whose title is the username. `cmd_chown` is therefore
`set_metadata_field` plus `save_ticket`, with the whole-file no-op comparison
`set` uses and the same `report()` line, so an owner set to the value it already
holds is reported unchanged and nothing is written.

Nothing new writes a file: the update goes through `write_then_replace`, scoped
to the lines under `## Metadata`, so a description quoting `**Owner**:` is left
as prose and a failure leaves the ticket whole. Tested for the change, the
no-op, all three resolution tiers, a swapped call, an empty user, a ticket with
no Owner field, and that the tick, the handwritten section and the filename all
survive.

The skill and the opencode tool carry it too, the tool with the argument order
in its description, since that is the one place a model can get it wrong
without failing.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 18:35:26 +02:00
Ansho ReiandClaude Opus 5 e6fe51e31e (996afd7) Monitor several boards in the tui as tabs, and bump to 0.9.0
`worklane tui` takes any number of paths, each resolved to the first `.worklane`
at or above it the way the working directory always was. With more than one board
there is a tab per project plus an `all` tab merging them, and `tab`/`shift+tab`
between them.

The selection moves onto `Tab`: sharing one column and card index across projects
would point it at whatever unrelated ticket sat in the same place. The merge is
sorted through `by_priority_then_title`, now exported, rather than concatenated,
so its order does not depend on the order of the arguments. On the merge a card
and the overlay border name the project after the id, since across boards seven
characters of uuid are not an address.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 17:25:21 +02:00
Ansho ReiandClaude Opus 5 2298d3373a (8528c50) Hide the done column in the tui until d asks for it, and bump to 0.8.2
Done only grows. It already holds more tickets than the other three columns
together, so a quarter of the width was going to the column least often read
while the ones being worked got squeezed for it.

Not a new opinion: `ls` already counts done in its summary and leaves it out of
the listing below. The board now does the same, and the footer carries the
count while the column is hidden, which is the board's version of that summary
line. It reads `d show done (17)` while hidden and `d hide done` while shown,
so the count only appears where a column heading is not already carrying it.
The modal footer names the key too, since it works with a ticket open.

Hiding is a change to what is drawn, never to what is read. `reload` still
scans the done directory and `digest` still watches it, so the count is right
and revealing the column needs no rescan.

`visible()` returns a prefix of the columns rather than a filter, which is what
keeps `column` and `offsets` valid as indices into either. It is derived from
where DONE actually sits rather than assuming the last slot, and a test pins
done as last: a status inserted after it would otherwise hide two columns in
silence. DONE is now a constant, since `ls` and the board are two readers of
the same rule.

Hiding the column under the selection moves the selection to the last drawn
column and closes an open detail view. Refreshing the modal onto whichever
ticket the selection landed on was the alternative, and it swaps what someone
is reading without saying so, which is how a person acts on the wrong ticket.
Showing done again is a no-op for the selection, since a column is appended
rather than inserted.

Three existing tests asserted a column heading with `screen.contains("done
(0)")` over the whole render, and the new footer holds that string whether the
column is drawn or not, so all three passed for the wrong reason the moment
done was hidden. They now assert against the top border row through a
`headings()` helper, with `footer()` beside it.

The choice is not remembered between runs: worklane has no config file, and one
flag is not a reason to start one.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 16:30:06 +02:00
Ansho ReiandClaude Opus 5 8013c2b74d (d8e78cd) Clear the clippy warnings, and bump to 0.8.1
`cargo clippy --all-targets` was reporting 96 warnings, 14 of them in the
binary. It is now clean from a cold cache, and the 211 tests still pass.

`clippy --fix` took the mechanical ones: needless borrows, `map_or` that is
`is_some_and`, `push_str` of a single character, manual `split_once`, and
`&PathBuf` parameters in the test fixtures. It also moved the `handlers.rs`
test module to the end of the file, which is what `items_after_test_module`
was pointing at.

Three by hand. `cmd_add` took nine parameters threaded from `main`, and now
takes `AddArgs`, which is how `set`, `append` and `check` already pass theirs;
the handler destructures it so the body reads as before, and `add --help` is
unchanged. The collapsed `if` in `content_trim` needed reindenting, since
`--fix` left its body at the old depth. And the two `split_once` rewrites read
as `.split_once(..).map(|(_, value)| value)` rather than clippy's `.map(|x|
x.1)`.

The two eight-argument `create_ticket` test fixtures keep an
`allow(too_many_arguments)` carrying the reason: the lint is right that
twenty-five positional call sites read as a wall of strings, but replacing them
with a named-field struct is a refactor and not a warning sweep. a34a316 tracks
it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 15:37:11 +02:00
Ansho ReiandClaude Opus 5 6178d7bd3d (dd36e97) Add install-skill, shipping the agent skill in the binary, and bump to 0.8.0
worklane's agent instructions only existed for someone with the repo checked
out. Anyone who installed the binary with cargo install got no document at
all, because cargo install places binaries and nothing else.

The skill now lives at assets/SKILL.md and is embedded with include_str, so an
installed copy can never be a different version from the binary that describes
it. `worklane install-skill` writes it, `--print` sends it to stdout so a
modified copy can be diffed, and a copy that was edited is reported and left
alone unless --force: it may have been changed on purpose, and silently
discarding that is worse than stopping.

One path serves both agents, ~/.claude/skills/worklane/SKILL.md. That was
settled empirically rather than from documentation: opencode 1.15.10 loads
~/.claude/skills as an external skill source alongside its own
~/.config/opencode/skill, and with HOME pointed at a temp directory holding
only what install-skill wrote, `opencode debug skill` lists the document under
the name worklane. Writing opencode's own path as well would be two copies of
one document, free to drift, for no gain.

The document is new rather than the one under .opencode, which is the user's
and not this repo's to ship. The ticket-workflow prose moved out of AGENTS.md
into it, so how to use worklane has one writer, and AGENTS.md points there.

The mechanism is in install.rs rather than skill.rs, and install() takes its
root as an argument: install-tool is coming, it needs a different root and the
same compare-and-refuse logic, and passing the root is what lets the tests
install into a temp directory instead of the home of whoever runs the suite.

Three tests guard the document itself, which is the part that goes stale
quietly: the frontmatter has to parse, every `worklane <x>` it shows has to be
a real subcommand, and every subcommand outside NOT_FOR_AGENTS has to appear in
it, so a new command cannot ship invisible to an agent.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 15:25:31 +02:00
Ansho Rei 220789efea (6b8f4d13) Scroll the tui board columns with the selection, and bump to 0.7.2 2026-08-21 14:24:19 +02:00
Ansho ReiandClaude Opus 5 c1137f29cf (1b78a24) Scroll the tui detail view on pgup and pgdn, and bump to 0.7.1
The detail view had no scrolling at all: no offset on Board, nothing passed
to Paragraph::scroll, so anything past the height of the overlay was
unreachable. Every ticket in this repo is longer than that. The footer read
"↑↓ scroll" while up and down moved the selection, so it named a key that did
nothing and sent the reader looking for their own mistake.

The scroll goes on pgup and pgdn rather than taking up and down. Up and down
stay on the selection with the modal open, so a whole column can be read
without closing it and the modal follows the selection. That is worth more
than the two keys.

The offset is clamped against the wrapped line count from
Paragraph::line_count, which is why ratatui now carries the
unstable-rendered-line-info feature. The paragraph wraps on words, so a clamp
on the raw lines would stop short of the end or run past it into blank space,
and counting the wrapping by hand would only agree with the widget until one
of the two changed. The clamp runs on the keypress and again in the draw,
since the terminal can be resized between them and a tick can shorten the
ticket under a reader who is already at the end.

The offset resets when the selection moves and when the modal is closed, so a
ticket opens at its top. It deliberately does not reset on a tick: an edit
elsewhere in the tree must not throw the reader back to the top of what they
are reading.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 12:38:54 +02:00
Ansho ReiandClaude Opus 5 78831f1a39 (f6af387) Add the board view, and bump to 0.7.0
worklane was one-shot commands only, so reading the board meant running ls again
and again and nothing ever showed the four statuses side by side, which is the
one view a kanban flow is for.

Four columns, a card per ticket carrying the priority mark, short id, title,
owner and due. Arrows or hjkl to move, enter for the detail view, q to quit.
Read only: moving a card by keypress is a follow-up, kept out until the watch
and render loop were solid.

Modelled on frig throughout, same crates and same shape: event poll on a 250ms
timeout so the tick runs when nobody is typing, a panic hook that leaves the
alternate screen before the backtrace, and the terminal restored on the error
path as well as on quit. A bare worklane opens it, as a bare frig does, so
Cli::command is now an Option.

The watch looks at files, not directories. A directory's mtime only moves on
create and rename, so a ticket edited in place would be missed; the digest
hashes every ticket and comment file's path, length and mtime. Comment files
are in it because a comment added elsewhere has to reach the detail view. It
guards the rescan rather than the draw, since ratatui diffs its buffer but
reading the tree every frame would not be free. notify is deliberately not a
dependency, and the reason is on the ticket.

Two orderings are deliberate. The worklane directory is looked for before the
terminal, so running outside one gives the usual message rather than a complaint
about the tty, and both errors stay testable without a pty. And a missing tty is
refused by name, since raw mode on a pipe fails with a bare "No such device or
address" that explains nothing.

The palette is now a Color enum rather than a string, so the escape the CLI
writes and the ratatui colour the board draws come from one definition and a
colour missing from either is a compile error. That retires the test which
existed only to catch a name with no entry, the failure that once left magenta
undefined.

Cards come from collect_ticket_items, so there is no second parser;
TicketItem gained the path the detail view opens. content_trim and
format_comments_with take the colour decision, because ratatui draws spans and
would print an escape as literal bytes.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 11:44:37 +02:00
Ansho ReiandClaude Opus 5 bbb1568a0f (eadaca9) Add check and uncheck for one acceptance criterion, and bump to 0.6.0
Criteria are stored as - [ ] lines and nothing could tick one, so marking
progress meant replacing the whole list through set, losing the state of every
other item.

check and uncheck are separate commands rather than one verb with a flag,
sharing CheckArgs and cmd_check. The criterion is an index first and a substring
second, so a criterion whose text is literally "2" is reachable only by
substring. A number out of range is reported as a bad index rather than as a
substring that missed.

Only the character between the brackets is spliced, so the text keeps whatever
indentation and spacing it had. Criteria are counted inside the Acceptance
Criteria section only, so a checkbox written into a description is not a
criterion and a handwritten line in the section takes no number.

With the criterion omitted, the criteria are listed and the number asked for
when stdin is a terminal. Where it is not, the same list comes back as an error
instead. Prompting regardless would leave the opencode wrapper blocked on a
stdin that never closes, and that is the choice resolve_ticket already makes for
an ambiguous match, for the same reason: the wrapper keeps stderr and throws on
the code, so a list printed to stdout would be discarded.

Any listing of a subset keeps the real numbers. Renumbering the matches from one
would contradict the advice to use the number and point at the wrong criterion.

show now numbers the criteria as "1. [x] text", so the index is visible where
the ticket is read. That also drops a manual prefix strip, so clippy is one
warning below where it started.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 10:46:07 +02:00
Ansho ReiandClaude Opus 5 3810e442c6 (da03690) Add set and append for editing a ticket, and bump to 0.5.0
Nothing could change a ticket after it was created. mv wrote status, comment
appended a file, and that was the whole set of mutations, so correcting a typo
or adding a criterion meant hand editing the markdown.

Two commands rather than the one vague "edit" the ticket described. set replaces
a field, append adds to a section, so the verb carries the meaning instead of a
prefix on seven flag names, and append only offers the three sections that hold
multiple lines. Owner is absent from both, it belongs to the chown command filed
alongside this, and status stays mv's. One field, one writer.

Sections are a table, DESCRIPTION, ACCEPTANCE and PLAN, each carrying a heading,
a label, the placeholder add writes when empty, and a kind. Both commands walk
it, so a section added later is one entry rather than edits in two places.

Everything is targeted line surgery and never a regenerated file, which is what
keeps a ticked criterion ticked and a handwritten section intact when an
unrelated field changes. Appending to a numbered section continues from the
count already there rather than renumbering above it, so a handwritten line
survives exactly as written. Appending to an empty section replaces the
placeholder instead of following it.

An empty value is a paragraph break for a section and a usage error for a
scalar, since it looks like a way to clear a field and clearing is not supported
yet. No-op detection compares the whole file before and after each edit, so a
field set to the value it already holds is reported unchanged and nothing is
written.

Two things came out of building it. move_ticket_file's staged write is extracted
as write_then_replace, now the only way any ticket file is written. And the file
is located by uuid rather than by title: titles are not unique, add allows
duplicates on purpose, and the old title scan meant mv <uuid-of-second> moved
the first ticket sharing its title. Reproduced, fixed, and pinned by a test.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 02:36:20 +02:00
Ansho ReiandClaude Opus 5 b28ddb9210 (eed7309) Die quietly on a truncated pipe, and bump to 0.3.1
Rust sets SIGPIPE to SIG_IGN at startup, so a write to a closed pipe returned
EPIPE and println panicked on it. `worklane ls | head -3` printed a panic and a
backtrace on stderr instead of three lines, which reads as a real fault and is
not what any other tool in a pipeline does.

main now restores the default disposition before any output, the same six lines
frig carries for the same reason. The cost is that a truncated pipe kills the
process with signal 13, so a shell reports 141 rather than 101. That is what
head and sort do, and it is now in the README next to the other exit codes.

The tests drop the read end rather than racing head for it, over a listing large
enough to exceed the 64 KiB a pipe holds, since a smaller one lands entirely in
the buffer and proves nothing. A shell pipeline into head is covered too, and
the exit codes for a real error and a usage mistake are pinned so the reset
cannot quietly change them.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:34:45 +02:00
Ansho ReiandClaude Opus 5 ddbd45e332 (dca0b61) Add priority as a ticket field
Priority lived in tags, as p1 to p3, which ls could neither sort nor
filter on, nothing validated, and a typo like P1 passed silently. ls
sorted by title only, so a backlog of any size gave no ordering signal.

Levels are 1 to 5 with 1 most urgent, matching what the tags meant.
Omitting the flag leaves the field _Not set_, like Due and Owner: there is
no implicit middle level, because a priority nobody chose is worse than
none. clap rejects anything outside the range before a ticket is written.

Priority parses to three states rather than two. A stored value outside
the range is Invalid, kept distinct from Unset, so a typo cannot read as
"no priority": it shows as ? and sorts just ahead of the unset tail.

ls sorts on priority and falls back to the old title sort, and --priority
filters, composing with the status filter in both the grouped and the
filtered listing. TicketItem becomes a struct, since a sixth tuple field
was past reading.

Migrated the 31 tickets already carrying p1 to p3 tags: the level moves to
the field and the tag is dropped.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:36:19 +02:00
Anshorei dd5692d0a3 (724dc03) Add -o <owner> flag to comment subcommand 2026-05-15 16:32:03 +02:00
Anshorei 443586a583 (523c9fe) Split monolithic main.rs file 2026-05-15 16:07:02 +02:00
Anshorei cd19e4e6cf (a0dc5e3) Display comments under worklane show 2026-05-15 12:00:22 +02:00
Anshorei bc3ee0c53b (339c65a) Add comment command 2026-05-15 11:11:40 +02:00
Anshorei a1bf4df880 (dd8a0c9) Add git user as default owner 2026-05-15 02:42:50 +02:00
Anshorei aef8002d23 (101c2444) Add colours to ls command 2026-05-15 02:18:04 +02:00