Files
worklane/src/main.rs
T
Ansho ReiandClaude Opus 5 af1ef1f97f (ebad2fa) Scroll the campaign description in the frame above the board
The frame showed the opening line of a description and the rest was only
readable through `campaign show`, which means leaving the board. It now
holds three rows of prose and pages through the remainder on `pgup` and
`pgdn`, reached by going up past the top card of a column.

Four decisions rather than four edits:

`section_prose` replaces `section_opening`. The campaign file is only in
hand while the campaigns directory is being read, so that read carries
the whole description and `CampaignRow::summary` takes the picker's one
line back off it. Two fields, one cut from the other, would be two
strings free to come from different reads of the same file.

`CAMPAIGN_PROSE_ROWS` is a constant. Fitting the frame to the
description would resize every column whenever the filter changed, so
the height is fixed at three rows and scrolling covers the rest. Two
more rows of cards spent than the one row cost.

`Focus` is the third place the selection can be, held on `Tab` beside
the filter and the new `frame_offset`. Every key that acts on a card
answers for it: `enter` is inert because `Tab::selected` hands back
nothing there, `left` and `right` are inert because the frame spans the
board, and `y` copies the campaign's short id, so `y copy id` means the
id of the selected thing in every state. No card is drawn reversed while
the frame holds the selection, since that highlight is what says which
ticket a key is about. The frame is out of reach from under an open
ticket, where up and down step through tickets and the overlay follows.

`Board::scroll_page` holds the precedence, not the `main.rs` arm: an
open ticket keeps both keys whatever holds the selection behind it, the
rule `dismiss` follows for the same reason. The page indicator, the
step and the clamp are the overlay's `page_indicator`, `scroll_step` and
`last_offset`, so the two places a reader presses these keys behave the
same. The indicator sits beside `q board` rather than up beside the
title, which would shorten a long campaign name whenever its
description grew.

Criterion 11 is not done: 2a83bd4 has not landed, so there is no tag
frame to give the same treatment. The model it inherits is in place and
named on the ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-23 17:47:09 +02:00

259 lines
12 KiB
Rust

use anyhow::Result;
use clap::Parser;
mod campaign;
mod clipboard;
mod command;
mod completions;
mod handlers;
mod install;
mod tag;
mod tui;
mod util;
use command::*;
use handlers::*;
use util::*;
/// Die quietly when stdout is closed early, the way every other Unix tool does.
///
/// Rust sets `SIGPIPE` to `SIG_IGN` at startup, which turns a closed pipe into an
/// io error that `println!` panics on. So `worklane ls | head -3` printed a panic
/// and a backtrace instead of three lines, which is both alarming and easy to
/// mistake for a real fault. Restoring the default handler makes `| head` behave.
///
/// The cost is that a truncated pipe now kills the process with signal 13 rather
/// than returning a code, so `pipefail` sees 141 instead of 101. That is what
/// `head` and `sort` do, and it is recorded in the README.
fn quiet_broken_pipe() {
// SAFETY: setting a signal disposition to the default is always valid, and
// this runs before any thread is spawned.
unsafe {
libc::signal(libc::SIGPIPE, libc::SIG_DFL);
}
}
fn main() -> Result<()> {
// Before any output, so no write can beat it to a closed pipe.
quiet_broken_pipe();
let cli = Cli::parse();
let start = std::env::current_dir()?;
match cli.command {
// No subcommand opens the board, the way a bare `frig` does, and with no path
// it opens the board above the working directory.
None => run_tui(&[], &start),
Some(Command::Tui { paths }) => run_tui(&paths, &start),
Some(Command::Init) => cmd_init(&start),
Some(Command::Add(args)) => cmd_add(&args, &start),
Some(Command::Ls(args)) => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_ls(&args, &worklane_dir)
}
Some(Command::Show { id }) => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_show(&id, &worklane_dir)
}
Some(Command::Mv { ticket, status, force }) => cmd_mv(&ticket, status, force, &start),
Some(Command::Set(args)) => cmd_set(&args, &start),
Some(Command::Append(args)) => cmd_append(&args, &start),
Some(Command::Relate(args)) => cmd_relate(&args, &start),
Some(Command::Chown(args)) => cmd_chown(&args, &start),
Some(Command::Check(args)) => cmd_check(&args, true, &start),
Some(Command::Uncheck(args)) => cmd_check(&args, false, &start),
Some(Command::Comment { ticket, body, owner }) => {
cmd_comment(&ticket, &body, &owner, &start)
}
Some(Command::Campaign { command }) => match command {
CampaignCommand::Add(args) => cmd_campaign_add(&args, &start),
CampaignCommand::Ls { ids } => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_campaign_ls(&worklane_dir, ids)
}
CampaignCommand::Set(args) => cmd_campaign_set(&args, &start),
CampaignCommand::Show { campaign } => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_campaign_show(&campaign, &worklane_dir)
}
},
Some(Command::Assign { campaign, ticket }) => cmd_assign(&campaign, &ticket, &start),
// The bare form and `ls` are one arm: `worklane tags` was the listing before the
// group existed and the fish completion still calls it that way, so the two
// spellings cannot be allowed to drift into two behaviours.
Some(Command::Tags { command }) => match command {
None | Some(TagCommand::Ls) => {
let worklane_dir = find_worklane_dir(&start)?;
cmd_tags(&worklane_dir)
}
Some(TagCommand::Add(args)) => cmd_tag_add(&args, &start),
Some(TagCommand::Set(args)) => cmd_tag_set(&args, &start),
},
// No board either, for the reason `install-skill` has none: a completion script
// is generated from the clap definition and is the same wherever it is run.
Some(Command::Completions { shell }) => {
completions::generate(shell, &mut std::io::stdout()).map_err(Into::into)
}
// No board is looked for: the point of the skill is to teach an agent worklane
// before there is a `.worklane` anywhere.
Some(Command::InstallSkill { skill, force, print }) => {
cmd_install_skill(skill.as_deref(), force, print)
}
// No board either, and one agent rather than both: opencode loads the tool file,
// Claude Code has no path for one.
Some(Command::InstallTool { force, print }) => cmd_install_tool(force, print),
}
}
// ---------------------------------------------------------------------- tui --
/// Restore the terminal whatever happens.
///
/// A panic inside the draw loop with raw mode still on leaves the shell unusable and
/// the backtrace unreadable, so the hook runs before the default one.
fn install_panic_hook() {
let previous = std::panic::take_hook();
std::panic::set_hook(Box::new(move |info| {
let _ = restore_terminal();
previous(info);
}));
}
fn restore_terminal() -> std::io::Result<()> {
crossterm::terminal::disable_raw_mode()?;
crossterm::execute!(std::io::stdout(), crossterm::terminal::LeaveAlternateScreen)
}
fn run_tui(paths: &[std::path::PathBuf], start: &std::path::Path) -> Result<()> {
use crossterm::event::{self, Event, KeyCode, KeyEventKind, KeyModifiers};
use std::io::IsTerminal;
// The boards are looked for before the terminal is, so running this outside a
// worklane directory gives the same message every other command gives rather than
// a complaint about the terminal.
let projects = tui::projects(paths, start)?;
// Without this, entering raw mode on a pipe fails with a bare "No such device or
// address (os error 6)", which says nothing about the actual mistake. A bare
// `worklane` is how the board is opened, so a script that reaches it by accident
// has to be pointed at a subcommand.
if !std::io::stdin().is_terminal() {
return Err(anyhow::anyhow!(
"`worklane` with no subcommand opens the board, which needs a terminal.\n\
For scripted use try `worklane ls` or `worklane show`; `worklane --help` \
lists everything."
));
}
let mut board = tui::Board::new(projects)?;
install_panic_hook();
crossterm::terminal::enable_raw_mode()?;
crossterm::execute!(std::io::stdout(), crossterm::terminal::EnterAlternateScreen)?;
let mut terminal =
ratatui::Terminal::new(ratatui::backend::CrosstermBackend::new(std::io::stdout()))?;
let result = (|| -> Result<()> {
while !board.should_quit {
board.tick()?;
terminal.draw(|frame| tui::draw(frame, &board))?;
// Taken after the draw, so a scroll measures the overlay that is on screen.
let screen = terminal.size()?;
// Bounded, so the tick still runs when nobody is typing.
if !event::poll(tui::POLL)? {
continue;
}
let Event::Key(key) = event::read()? else {
continue;
};
if key.kind != KeyEventKind::Press {
continue;
}
// Every keypress takes away what the last one said, so a notice never
// outlives the moment it belongs to. Ahead of the prompt as well as the
// arms: a key typed into a query is still a key. The rule is
// `Board::clear_notice`, where a test can reach it, and the arm below that
// sets one runs after this.
board.clear_notice();
// Ahead of the arms, because a prompt has to swallow every key it is
// given: typing `d` into a query must not toggle the done column and `q`
// must not quit. It reports what it took, so the arms below stay a plain
// match on the keys it did not, and it takes nothing when no prompt is open.
// The rule is `Board::search_key`, where a test can reach it.
if board.search_key(key, screen) {
continue;
}
// The same contract for the campaign picker, which is the other mode that owns
// the keyboard while it is open. Two calls rather than one combined pre-branch,
// because only one of the two can be open at a time and each reports for
// itself; the rules are `Board::search_key` and `Board::picker_key`, where a
// test can reach them.
if board.picker_key(key, screen) {
continue;
}
match key.code {
// One arm, because the two keys mean one thing: close what is open, and
// quit when there is nothing left to close. Two arms carrying one rule
// is how a later edit changes it for one key and not the other, which is
// what `q` quitting out from under an open ticket already was. The rule
// itself is `Board::dismiss`, where a test can reach it.
KeyCode::Esc | KeyCode::Char('q') => board.dismiss(screen),
// The only key that leaves the board from an open ticket, which is why
// the footer names it there.
KeyCode::Char('c') if key.modifiers.contains(KeyModifiers::CONTROL) => {
board.should_quit = true
}
KeyCode::Enter | KeyCode::Char(' ') => board.toggle_detail(),
KeyCode::Left | KeyCode::Char('h') => board.select_column(-1, screen),
KeyCode::Right | KeyCode::Char('l') => board.select_column(1, screen),
// Up and down stay on the selection, open detail view or not, so a
// column can be read through without closing the modal. Scrolling the
// open ticket is a page at a time, and so is scrolling the campaign
// frame that up reaches from the top card of a column.
KeyCode::Up | KeyCode::Char('k') => board.select_card(-1, screen),
KeyCode::Down | KeyCode::Char('j') => board.select_card(1, screen),
// The open ticket first and the campaign frame behind it, which is
// `Board::scroll_page` rather than a condition written here: the arms in
// this dispatch are not reachable from a test.
KeyCode::PageUp => board.scroll_page(-1, screen),
KeyCode::PageDown => board.scroll_page(1, screen),
// Tabs cycle rather than clamp, the way tabs everywhere do, and are
// a no-op with a single board. Free of every other binding: the
// columns took hjkl and the arrows.
KeyCode::Tab => board.select_tab(1, screen),
KeyCode::BackTab => board.select_tab(-1, screen),
// Free of the other bindings, and the footer names it in both states.
KeyCode::Char('d') => board.toggle_done(screen),
// An ordinary single-shot action like the rest: it opens the prompt, and
// from the next keypress on `search_key` above has the keyboard. A `/`
// typed into an open prompt is taken there as a character, and one pressed
// at an open picker is taken by `picker_key` to open the picker's own
// query, so this arm is only ever the way in to the board's prompt.
KeyCode::Char('/') => board.open_search(),
// `y` as in yank, for the readers this board is for, and the only letter
// left that a vim hand would reach for. The clipboard is handed in rather
// than reached for inside `Board`, so the suite can drive both answers.
KeyCode::Char('y') => board.copy_selected_id(clipboard::copy),
// The way in to the campaign picker, like `/` is to the search prompt: from
// the next keypress on `picker_key` above has the keyboard. Free of every
// other binding, and `ctrl-c` is matched above this so quitting still wins.
KeyCode::Char('c') => board.open_picker(),
_ => {}
}
}
Ok(())
})();
// Before the error surfaces, so a failure does not leave the shell in raw mode.
restore_terminal()?;
result
}