Nothing could change a ticket after it was created. mv wrote status, comment appended a file, and that was the whole set of mutations, so correcting a typo or adding a criterion meant hand editing the markdown. Two commands rather than the one vague "edit" the ticket described. set replaces a field, append adds to a section, so the verb carries the meaning instead of a prefix on seven flag names, and append only offers the three sections that hold multiple lines. Owner is absent from both, it belongs to the chown command filed alongside this, and status stays mv's. One field, one writer. Sections are a table, DESCRIPTION, ACCEPTANCE and PLAN, each carrying a heading, a label, the placeholder add writes when empty, and a kind. Both commands walk it, so a section added later is one entry rather than edits in two places. Everything is targeted line surgery and never a regenerated file, which is what keeps a ticked criterion ticked and a handwritten section intact when an unrelated field changes. Appending to a numbered section continues from the count already there rather than renumbering above it, so a handwritten line survives exactly as written. Appending to an empty section replaces the placeholder instead of following it. An empty value is a paragraph break for a section and a usage error for a scalar, since it looks like a way to clear a field and clearing is not supported yet. No-op detection compares the whole file before and after each edit, so a field set to the value it already holds is reported unchanged and nothing is written. Two things came out of building it. move_ticket_file's staged write is extracted as write_then_replace, now the only way any ticket file is written. And the file is located by uuid rather than by title: titles are not unique, add allows duplicates on purpose, and the old title scan meant mv <uuid-of-second> moved the first ticket sharing its title. Reproduced, fixed, and pinned by a test. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
11 KiB
11 KiB
AGENTS.md
Project Structure
src/main.rs- All application logicsrc/command.rs- CLI argument definitions using clap derivetests/- Integration tests usingassert_cmdandassert_fs- Ticket files stored as
.mdin.worklane/<status>/directories
Ticket File Format
- Filenames:
<uuid_v4>_<slug>.md - Metadata fields parsed by
parse_ticket_field():ID,Priority,Tags,Due,Owner,Created At,Status - Format:
**Field Name**: value - Ticket structure:
# Title→## Description→## Acceptance Criteria→## Implementation Plan→## Metadata - Comments stored in
.worklane/comments/<ticket_uuid>/<timestamp>.mdwith**Comment**,**Author**,**Time**fields
Status Workflow
backlog → committed → reviewing → done
Testing
- Run:
cargo test - Tests use
assert_cmdandassert_fsfor CLI testing setup_worklane()creates temp.worklane/with all four status folders pre-createdcreate_ticket()writes fully-formed markdown files directly (no--separator for positional args in test commands)
Coding Guidelines
Rust Style
- Use
if matches!(expr, Variant)instead ofif let Some(Variant) = exprfor enum variant matching - Use
if let Some(x) = exprinstead ofif let Some(Some(x)) = expr— drop unnecessary nesting - Prefer explicit
matchoverunwrap_or_default()for clarity - Use
unwrap_or_else(|| expr)for lazy defaults,unwrap_or(val)for eager defaults - Use
anyhow!()with context strings that include identifying info (e.g. UUID, title) not bare values
CLI Arguments
- The prose arguments carry
allow_hyphen_values, via thePROSEconstant incommand.rs:add --title,--description,--acceptance,--plan, and thecommentbody. Ticket text quotes flag names constantly, and without it a criterion reading--print is supportedis parsed as a flag and the whole ticket is refused with nothing written - The trade: on those five arguments a genuinely mistyped flag now lands as content rather than raising a usage error. That is the right way round for prose and the wrong way round for anything else, which is why
due,priority,tags,ownerandstatusare deliberately left without it. A mistyped flag there is still a usage error, exit 2, and no ticket is written. Do not addPROSEto a new argument unless it holds prose - The ticket positionals (
show <id>,mv <ticket>,comment <ticket>) are also left alone, so a search term starting with a hyphen is a usage error. Reachable now that a hyphen-leading title can be stored: use the UUID, or put the flags first and separate with--, as inmv --status committed -- -leading-title - A bare
--is a value when it follows an option (--title --stores--) and clap's end-of-options marker when it sits in a positional. So acommentbody of exactly--needs its own separator,comment <ticket> -- --. Without it the body is reported missing and nothing is written, which is a clear failure rather than a silent drop addhas no positionals, so anything after a bare--is an unexpected argument and fails- A paragraph break in a description is an empty
--descriptionvalue.cmd_addjoins the values with a single newline, so-d "First." -d "" -d "Second."writes the blank line.trim_blank_ends()drops blank values at either end, so a break never lands against a section heading, and an all-blank description reads as no description. Interior runs are kept verbatim rather than collapsed --acceptanceand--planare lists, one criterium or step per value, so a blank there is spacing rather than content and the opencode wrapper drops it. Only--descriptionpreserves blanks
Editing a Ticket
setreplaces a field,appendadds to a section. The verb carries the meaning, so no flag needs a replace-or-append prefix, andappendonly offers the sections that hold multiple lines- One field, one writer.
sethas no--owner(that ischown's, once it exists) and no--status(that ismv's). Do not add either - Sections are a table in
util.rs:DESCRIPTION,ACCEPTANCE,PLAN, each with a heading, a label, the placeholderaddwrites when empty, and aSectionKind. Adding a section later is one entry, not edits in both commands - Everything is targeted line surgery, never a regenerated file. That is what keeps a ticked criterion ticked and a handwritten
## Notessection intact when an unrelated field changes.section_body()finds the lines to touch,set_metadata_line()does the metadata, and every other byte is copied through - Appending to a numbered section continues from the count of steps already there and does not renumber what is above it, so a handwritten line in the section survives exactly as written
- Appending to an empty section replaces the placeholder rather than following it, or the ticket would read
_No description provided._above its description - An empty value is a paragraph break for the three sections and a usage error for the scalars, via
non_emptyincommand.rs. Clearing a field is not supported yet, and the error says so rather than guessing - No-op detection compares the whole file before and after each edit, so a field set to the value it already holds is reported unchanged and nothing is written
find_ticket_file()matches on the uuid, never the title. Duplicate titles are allowed, so a title scan can land on a different ticket than the one resolved:mv <uuid-of-second>used to move the first ticket sharing its titlewrite_then_replace()is the only way a ticket file is written. Content first, rename second, so a failure leaves a correct ticket under a stale name rather than a half-written one
Color and Output
- Use
color_text()helper for colored output — it respectsshould_use_colors()(terminal detection) - Color codes are defined in
get_color(): red (31), cyan (36), orange (33), green (32), grey (38;5;8), magenta (1;35), brightred (38;5;9) - Reset color with
\x1b[0mafter colored text - Bold uses
\x1b[1;35m(magenta bold) - Always test color output works correctly in both terminal and pipe modes
quiet_broken_pipe()runs first inmain, restoring the defaultSIGPIPEdisposition. A truncated pipe therefore kills the process with signal 13, which a shell reports as 141, instead of makingprintln!panic. Do not wrap prints to handle write errors and do not reinstateSIG_IGN; the exit codes are documented in the README
Color Guideline
- UUID → red (31)
- Status → orange (33)
- Timestamp → cyan (36)
- Title → green (32)
- Unknown values (
_None_,_Not set_) → grey (38;5;8) - Priority ramp → brightred (1), red (2), orange (3), cyan (4), grey (5). Green is deliberately absent: it means title
- Grey is indexed colour 8 in the 256-colour form, not SGR 90 or 37. Both of those failed on a real palette: 90 leans on the bright-black slot and 37 can sit on top of the default foreground.
\x1b[38;5;8mis byte for byte what crossterm emits for ratatui'sColor::DarkGray, the grey frig and pantop use for dimmed rows
Code Organization
- Colorization functions (
colorize_line,colorize_ordered,content_trim_colored) handle markdown formatting showrenders the Metadata section as a two column table viarender_metadata_table, not line by line. Column width is measured on the raw field names in characters and padding is applied before anything is styled: measuring a coloured string counts its escapes towards its width.paint()iscolor_text()with the colour decision passed in, which is what lets a test render both ways in one process- The title is printed once, by
cmd_show.content_trim_coloredskips the#heading in the file content - Rules under headings are measured on the displayed name in characters, never on the raw line or in bytes
resolve_ticket()scans all status directories — it's the single source for ticket lookup by UUID prefix, title, or filenameparse_ticket_field()handles extracting metadata values from markdown formatmove_ticket_file()stages the updated content in a temp file under.worklane/, renames it over the source, and only then renames the file into the target directory. Do not reorder these: renaming first and writing second leaves a ticket in its new directory claiming the old status, and writing to the target then deleting the source puts it in two directories at once. The temp lives outside the status directories so a leftover is never read as a ticket. A failure at the last step leaves the ticket in its old directory with a Status one move ahead, which the nextmvcorrects- Field lookup, read and write, is scoped to the lines under the
## Metadataheading and anchored to the start of the line. Prose above it is free text: tickets in this repo quote field markers in their descriptions, and an unscoped search reads or rewrites those instead.set_status_field()carries the same scoping
Ticket Resolution
resolve_ticket()returns(status, title, content)tuple- Three tiers, evaluated in order: UUID prefix > title substring > filename substring. The first non-empty tier wins outright and later tiers are not consulted. This is not cosmetic: ticket titles reference other tickets by id, so a flat OR of the three reported an exact prefix match as ambiguous against whichever title mentioned it
- The UUID tier applies from
MIN_ID_SEARCH(4) characters up. Not 8:lsprintsSHORT_ID_WIDTH(7) characters, so a longer minimum would drop the printed id out of the UUID tier and let any title quoting it win instead. Below the minimum the search is text, soshow 641is a title search - The filename tier earns its place by reaching the middle of a UUID, which the prefix tier cannot. It is also why a short UUID search still resolves under a longer minimum, just at the wrong precedence, so a test for the minimum needs a decoy title to be meaningful
- Ambiguous matches (multiple results) print options and exit(1)
- Never return empty strings for required fields — use
_Not set_or_None_as defaults
Git Workflow
- Commit format:
([ticketID]) [short description] - Use
--fixupfor incremental changes - Test before moving to reviewing status
Version Bumps
- Before every commit, decide whether the change warrants a version bump in
Cargo.toml - Always ask the user to confirm the bump and its kind before making it — never bump silently, and never skip the question because the answer looks obvious
- Pre-1.0, so: patch for fixes and internal changes, minor for a new command, flag or changed output, major only for a deliberate 1.0
- No bump for docs-only, tests-only or
--fixupcommits - When one body of work spans several commits, bump once on the final commit rather than on each
- Bump
Cargo.tomland theworklaneentry inCargo.locktogether, in the commit that carries the bump - Every bump gets a matching annotated tag,
v<version>, on the bump commit — a bumped version is never left untagged - Tag locally only; never push a tag unless asked
worklane --versionreports the crate version alongside the build sha, so the bump is what makes one release distinguishable from another