Commit Graph
20 Commits
Author SHA1 Message Date
Ansho ReiandClaude Opus 5 b56b31d2d9 (f39b651) Add chown for the ticket owner, and bump to 0.10.0
The Owner field had no writer after `add`. It was folded into `set` in da03690
and comes out here as its own command, so no field is writable from two places,
the same reasoning that keeps status in `mv` alone.

`worklane chown alice 641e3d5`, user first, after Unix `chown`. That reverses
the ticket-first order `mv`, `comment` and `show` use, deliberately: the name
borrows the Unix association, so the argument order borrows it too.

The swap is left to resolution rather than checked for. Given `chown 641e3d5
alice` the second argument has to resolve as a ticket, and a bare username does
not, so the call fails on its own; a check on the first argument would only fire
where resolution already refuses and would stay silent on the one case it cannot
catch, a ticket whose title is the username. `cmd_chown` is therefore
`set_metadata_field` plus `save_ticket`, with the whole-file no-op comparison
`set` uses and the same `report()` line, so an owner set to the value it already
holds is reported unchanged and nothing is written.

Nothing new writes a file: the update goes through `write_then_replace`, scoped
to the lines under `## Metadata`, so a description quoting `**Owner**:` is left
as prose and a failure leaves the ticket whole. Tested for the change, the
no-op, all three resolution tiers, a swapped call, an empty user, a ticket with
no Owner field, and that the tick, the handwritten section and the filename all
survive.

The skill and the opencode tool carry it too, the tool with the argument order
in its description, since that is the one place a model can get it wrong
without failing.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 18:35:26 +02:00
Ansho ReiandClaude Opus 5 e6fe51e31e (996afd7) Monitor several boards in the tui as tabs, and bump to 0.9.0
`worklane tui` takes any number of paths, each resolved to the first `.worklane`
at or above it the way the working directory always was. With more than one board
there is a tab per project plus an `all` tab merging them, and `tab`/`shift+tab`
between them.

The selection moves onto `Tab`: sharing one column and card index across projects
would point it at whatever unrelated ticket sat in the same place. The merge is
sorted through `by_priority_then_title`, now exported, rather than concatenated,
so its order does not depend on the order of the arguments. On the merge a card
and the overlay border name the project after the id, since across boards seven
characters of uuid are not an address.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 17:25:21 +02:00
Ansho ReiandClaude Opus 5 8013c2b74d (d8e78cd) Clear the clippy warnings, and bump to 0.8.1
`cargo clippy --all-targets` was reporting 96 warnings, 14 of them in the
binary. It is now clean from a cold cache, and the 211 tests still pass.

`clippy --fix` took the mechanical ones: needless borrows, `map_or` that is
`is_some_and`, `push_str` of a single character, manual `split_once`, and
`&PathBuf` parameters in the test fixtures. It also moved the `handlers.rs`
test module to the end of the file, which is what `items_after_test_module`
was pointing at.

Three by hand. `cmd_add` took nine parameters threaded from `main`, and now
takes `AddArgs`, which is how `set`, `append` and `check` already pass theirs;
the handler destructures it so the body reads as before, and `add --help` is
unchanged. The collapsed `if` in `content_trim` needed reindenting, since
`--fix` left its body at the old depth. And the two `split_once` rewrites read
as `.split_once(..).map(|(_, value)| value)` rather than clippy's `.map(|x|
x.1)`.

The two eight-argument `create_ticket` test fixtures keep an
`allow(too_many_arguments)` carrying the reason: the lint is right that
twenty-five positional call sites read as a wall of strings, but replacing them
with a named-field struct is a refactor and not a warning sweep. a34a316 tracks
it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 15:37:11 +02:00
Ansho ReiandClaude Opus 5 6178d7bd3d (dd36e97) Add install-skill, shipping the agent skill in the binary, and bump to 0.8.0
worklane's agent instructions only existed for someone with the repo checked
out. Anyone who installed the binary with cargo install got no document at
all, because cargo install places binaries and nothing else.

The skill now lives at assets/SKILL.md and is embedded with include_str, so an
installed copy can never be a different version from the binary that describes
it. `worklane install-skill` writes it, `--print` sends it to stdout so a
modified copy can be diffed, and a copy that was edited is reported and left
alone unless --force: it may have been changed on purpose, and silently
discarding that is worse than stopping.

One path serves both agents, ~/.claude/skills/worklane/SKILL.md. That was
settled empirically rather than from documentation: opencode 1.15.10 loads
~/.claude/skills as an external skill source alongside its own
~/.config/opencode/skill, and with HOME pointed at a temp directory holding
only what install-skill wrote, `opencode debug skill` lists the document under
the name worklane. Writing opencode's own path as well would be two copies of
one document, free to drift, for no gain.

The document is new rather than the one under .opencode, which is the user's
and not this repo's to ship. The ticket-workflow prose moved out of AGENTS.md
into it, so how to use worklane has one writer, and AGENTS.md points there.

The mechanism is in install.rs rather than skill.rs, and install() takes its
root as an argument: install-tool is coming, it needs a different root and the
same compare-and-refuse logic, and passing the root is what lets the tests
install into a temp directory instead of the home of whoever runs the suite.

Three tests guard the document itself, which is the part that goes stale
quietly: the frontmatter has to parse, every `worklane <x>` it shows has to be
a real subcommand, and every subcommand outside NOT_FOR_AGENTS has to appear in
it, so a new command cannot ship invisible to an agent.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 15:25:31 +02:00
Ansho ReiandClaude Opus 5 78831f1a39 (f6af387) Add the board view, and bump to 0.7.0
worklane was one-shot commands only, so reading the board meant running ls again
and again and nothing ever showed the four statuses side by side, which is the
one view a kanban flow is for.

Four columns, a card per ticket carrying the priority mark, short id, title,
owner and due. Arrows or hjkl to move, enter for the detail view, q to quit.
Read only: moving a card by keypress is a follow-up, kept out until the watch
and render loop were solid.

Modelled on frig throughout, same crates and same shape: event poll on a 250ms
timeout so the tick runs when nobody is typing, a panic hook that leaves the
alternate screen before the backtrace, and the terminal restored on the error
path as well as on quit. A bare worklane opens it, as a bare frig does, so
Cli::command is now an Option.

The watch looks at files, not directories. A directory's mtime only moves on
create and rename, so a ticket edited in place would be missed; the digest
hashes every ticket and comment file's path, length and mtime. Comment files
are in it because a comment added elsewhere has to reach the detail view. It
guards the rescan rather than the draw, since ratatui diffs its buffer but
reading the tree every frame would not be free. notify is deliberately not a
dependency, and the reason is on the ticket.

Two orderings are deliberate. The worklane directory is looked for before the
terminal, so running outside one gives the usual message rather than a complaint
about the tty, and both errors stay testable without a pty. And a missing tty is
refused by name, since raw mode on a pipe fails with a bare "No such device or
address" that explains nothing.

The palette is now a Color enum rather than a string, so the escape the CLI
writes and the ratatui colour the board draws come from one definition and a
colour missing from either is a compile error. That retires the test which
existed only to catch a name with no entry, the failure that once left magenta
undefined.

Cards come from collect_ticket_items, so there is no second parser;
TicketItem gained the path the detail view opens. content_trim and
format_comments_with take the colour decision, because ratatui draws spans and
would print an escape as literal bytes.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 11:44:37 +02:00
Ansho ReiandClaude Opus 5 bbb1568a0f (eadaca9) Add check and uncheck for one acceptance criterion, and bump to 0.6.0
Criteria are stored as - [ ] lines and nothing could tick one, so marking
progress meant replacing the whole list through set, losing the state of every
other item.

check and uncheck are separate commands rather than one verb with a flag,
sharing CheckArgs and cmd_check. The criterion is an index first and a substring
second, so a criterion whose text is literally "2" is reachable only by
substring. A number out of range is reported as a bad index rather than as a
substring that missed.

Only the character between the brackets is spliced, so the text keeps whatever
indentation and spacing it had. Criteria are counted inside the Acceptance
Criteria section only, so a checkbox written into a description is not a
criterion and a handwritten line in the section takes no number.

With the criterion omitted, the criteria are listed and the number asked for
when stdin is a terminal. Where it is not, the same list comes back as an error
instead. Prompting regardless would leave the opencode wrapper blocked on a
stdin that never closes, and that is the choice resolve_ticket already makes for
an ambiguous match, for the same reason: the wrapper keeps stderr and throws on
the code, so a list printed to stdout would be discarded.

Any listing of a subset keeps the real numbers. Renumbering the matches from one
would contradict the advice to use the number and point at the wrong criterion.

show now numbers the criteria as "1. [x] text", so the index is visible where
the ticket is read. That also drops a manual prefix strip, so clippy is one
warning below where it started.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 10:46:07 +02:00
Ansho ReiandClaude Opus 5 3810e442c6 (da03690) Add set and append for editing a ticket, and bump to 0.5.0
Nothing could change a ticket after it was created. mv wrote status, comment
appended a file, and that was the whole set of mutations, so correcting a typo
or adding a criterion meant hand editing the markdown.

Two commands rather than the one vague "edit" the ticket described. set replaces
a field, append adds to a section, so the verb carries the meaning instead of a
prefix on seven flag names, and append only offers the three sections that hold
multiple lines. Owner is absent from both, it belongs to the chown command filed
alongside this, and status stays mv's. One field, one writer.

Sections are a table, DESCRIPTION, ACCEPTANCE and PLAN, each carrying a heading,
a label, the placeholder add writes when empty, and a kind. Both commands walk
it, so a section added later is one entry rather than edits in two places.

Everything is targeted line surgery and never a regenerated file, which is what
keeps a ticked criterion ticked and a handwritten section intact when an
unrelated field changes. Appending to a numbered section continues from the
count already there rather than renumbering above it, so a handwritten line
survives exactly as written. Appending to an empty section replaces the
placeholder instead of following it.

An empty value is a paragraph break for a section and a usage error for a
scalar, since it looks like a way to clear a field and clearing is not supported
yet. No-op detection compares the whole file before and after each edit, so a
field set to the value it already holds is reported unchanged and nothing is
written.

Two things came out of building it. move_ticket_file's staged write is extracted
as write_then_replace, now the only way any ticket file is written. And the file
is located by uuid rather than by title: titles are not unique, add allows
duplicates on purpose, and the old title scan meant mv <uuid-of-second> moved
the first ticket sharing its title. Reproduced, fixed, and pinned by a test.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-21 02:36:20 +02:00
Ansho ReiandClaude Opus 5 f5204f6d8b (866a4eb) Accept prose values that begin with a hyphen, and bump to 0.3.2
clap read any value starting with a hyphen as a flag, so a criterion quoting
--print was refused with "unexpected argument found" and no ticket was written
at all. Ticket text quotes flag names constantly, and the space form is what
both a person and the opencode wrapper produce, so the failure was routine.

allow_hyphen_values on the five arguments that carry prose: add --title,
--description, --acceptance, --plan, and the comment body. The trade is that a
genuinely mistyped flag there now lands as content instead of raising a usage
error, which is the right way round for prose and the wrong way round for
anything else, so due, priority, tags, owner and status are left alone and still
fail with exit 2. Written down in AGENTS.md.

The bare double hyphen is the one shape this does not reach: as an option value
it is stored as text, but in a positional it is clap's end-of-options marker and
is consumed before assignment. A comment body of exactly -- therefore needs its
own separator. Without it the body is reported missing and nothing is written,
so it is a clear failure rather than a silent drop. Tested, along with the
ordering that lets mv reach a hyphen-leading title.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 18:00:52 +02:00
Ansho ReiandClaude Opus 5 2503f9aee9 (3b7edd7) Show priority as a glyph, and bump to 0.2.0
A bare digit in a listing is easy to skip over. Levels render as a
two-segment meter that empties as the level rises: ●● 1, ●◐ 2, ●○ 3,
◐○ 4, ○○ 5, with ·· for unset and ?? for a value outside the range.

Only ●, ◐, ○ and · are used, because they are what frig draws for its
status indicators and so are known to be in the terminal font. The first
cut of this used the quadrant circles ◕ and ◔, which are in a quarter as
many fonts, so terminals substituted them from a fallback that drew them
oversized and the column came out ragged. Two cells of a three-level ramp
gives five steps of ink, 2, 1.5, 1, 0.5, 0, without leaving that safe set.
Tests pin the safe set, the equal width and the monotonic emptying.

The mark carries the level on its own, because colour cannot. Output is
colourless whenever it is piped, which is how the opencode tools and every
script read it, and NO_COLOR turns it off in a terminal too. Colour only
accentuates: brightred, red, orange, cyan, grey, skipping green because
green means title.

The number counts up while the meter empties, since 1 is the most urgent.
That is the convention, but it reads as a bug unless written down, so it
is in AGENTS.md and in the legend.

Both the ramp and the legend come from priority_mark, and `ls --help`
prints the legend, since nothing in a listing explains a mark. brightred
is indexed like grey, for the same reason: it is the spelling that
renders.

Minor bump: two new flags, a new metadata field and a changed ls row,
covering dca0b61 and this ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:50:09 +02:00
Ansho ReiandClaude Opus 5 ddbd45e332 (dca0b61) Add priority as a ticket field
Priority lived in tags, as p1 to p3, which ls could neither sort nor
filter on, nothing validated, and a typo like P1 passed silently. ls
sorted by title only, so a backlog of any size gave no ordering signal.

Levels are 1 to 5 with 1 most urgent, matching what the tags meant.
Omitting the flag leaves the field _Not set_, like Due and Owner: there is
no implicit middle level, because a priority nobody chose is worse than
none. clap rejects anything outside the range before a ticket is written.

Priority parses to three states rather than two. A stored value outside
the range is Invalid, kept distinct from Unset, so a typo cannot read as
"no priority": it shows as ? and sorts just ahead of the unset tail.

ls sorts on priority and falls back to the old title sort, and --priority
filters, composing with the status filter in both the grouped and the
filtered listing. TicketItem becomes a struct, since a sixth tuple field
was past reading.

Migrated the 31 tickets already carrying p1 to p3 tags: the level moves to
the field and the tag is dropped.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:36:19 +02:00
Ansho ReiandClaude Opus 5 32a43b5201 (c28bc04) Report the version and the commit it was built from
worklane --version exited 2: the Cli derive set name and about but never
version, so clap generated no flag. Nothing could say what a given binary
was, which matters here because the opencode tools shell out to whatever
worklane is on PATH, so an agent can be driving a stale build with no way
to notice.

The crate version alone would not have answered it. Cargo.toml is pinned
at 0.1.0 and nobody bumps it per install, so a stale install and a fresh
build both claim the same thing. A build script stamps the short sha
alongside it, giving "worklane 0.1.0 (df97b06)", and falls back to
"unknown" where there is no git directory, as when installing from a
published crate.

propagate_version lets subcommands answer too. This overrides the ticket's
own plan step, which said to skip the sha if it needed a build script.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 14:48:37 +02:00
Anshorei 12f34a3442 Fix 'add' tool command 2026-08-20 13:20:15 +02:00
Anshorei 73e5aee2a2 (415e1c3) Fix worklane.ts tool when passed multi-line args 2026-05-15 20:59:29 +02:00
Anshorei dd5692d0a3 (724dc03) Add -o <owner> flag to comment subcommand 2026-05-15 16:32:03 +02:00
Anshorei bc3ee0c53b (339c65a) Add comment command 2026-05-15 11:11:40 +02:00
Anshorei d668a24a3d (0b1a129) Add the mv command 2026-05-15 01:52:59 +02:00
Anshorei 94da69a1b2 Make ls status non-flag argument 2026-05-14 22:32:17 +02:00
Anshorei 7d40159959 (e97d55) Add show command 2026-05-14 22:28:00 +02:00
Anshorei fd216b056c (177665) Add ls command 2026-05-14 21:37:11 +02:00
Anshorei 17a02b906e Initial commit 2026-05-14 20:41:40 +02:00