a6023e2 made the three stamps mutually exclusive: entering a status wrote
its field and leaving removed it, so a finished ticket carried exactly one
of the three and the journey behind it was invisible. A reader asking when
this was filed, when it was picked up, when it went out for review and when
it finished got one answer and three absences, and nothing could tell that
committed had ever happened.
So the removal rule is replaced by an accumulation rule. `mv` stamps the
target's field on entry, re-entering restamps, and arriving anywhere removes
the fields of every status *after* the target. That is one arrival rule off
the flow order `Status::ALL` already holds, not a case per move, and it is
also what a forward skip under `-f` wants: backlog straight to done stamps
`Completed On` alone and leaves the stages it jumped unwritten rather than
fabricated. A backward move truncates the journey at the target, so done
back to reviewing drops `Completed On` and keeps the two before it, and
anything back to backlog drops all three.
Presence therefore changes meaning. A field no longer says the ticket sits
in that status now, it says the ticket got that far and has not been sent
back past it. `Status` is what says where it is.
This is still not d4ce964's history log. These answer how far and when,
once per stage; every status change, every owner and every tag along the way
is the log's job.
The placement a6023e2 chose already holds: the three sit directly after
`Created At` in `METADATA_ORDER`, so a ticket that has walked the whole flow
reads as one block of four timestamps in flow order ahead of Campaign and
Status. Nothing but `mv` writes them, pinned by a test over `add`, `set`,
`append` and `chown`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Layout only, no behaviour and no wording. 161 hunks across 22 files, 98 of them
rustfmt joining a call or a message onto the one line it fits on. The config it
formats to, and how its four numbers were arrived at, is the commit before this
one.
Separate so that it is reviewable by not being read: nothing here is a decision,
and every decision is next door.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
mv writes Committed On, Submitted On or Completed On for the status it
enters, so the board answers how long a ticket has been where it is
without guessing from file mtimes.
The three are mutually exclusive: entering stamps, leaving removes and
re-entering restamps, so a backward move under -f leaves no stale
Completed On behind. These fields are current state, like Status itself;
the trail of how the ticket got there belongs to the history log.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every argument worklane takes names a ticket, a status, a shell or a skill, and
the shell offered a directory listing for all of them. `completions <shell>`
prints a script for fish, bash, zsh, elvish and powershell, following what frig
does, which is where the shape of this comes from.
Two halves, because neither alone is enough. `clap_complete` generates the
structure from the clap definition, so a flag added to `command.rs` is completed
without anyone touching `completions.rs`, and fish gets a hand-written block
appended for what only the board knows. That block runs `worklane ls --ids` in a
command substitution, one run per keypress, 2.5ms in release on a board of
seventy-five tickets.
A status is a `util::Status` value enum now rather than a string, which was the
plan's third step and pays for itself three ways. clap refuses an unknown one at
parse time naming the four, so `cmd_mv`'s `valid_statuses` and the status half of
`cmd_ls`'s error are gone and exit 2 is what an unreal status gets, the bargain
`--due` and `--priority` already take. `status_dirs()` and `DONE` are derived
from `Status::ALL`, so the flow is written once. And clap emits the four for `mv
--status` itself. Only half free: the fish generator emits nothing for the
possible values of a *positional*, so `ls <status>` and `completions <shell>` are
listed in the appended half after all, read off the enums with `possible_values`
rather than by hand.
`ls --ids` is the machine-readable listing, and prints the short id, a tab and
the title rather than the id alone. Both readers want both fields: fish takes
what follows a tab as the description, which is what makes `worklane show <TAB>`
a list of titles instead of hex, and a script takes the id back with `cut -f1`.
It includes done, where the decorated listing leaves done out, because a
completion has to be able to name a finished ticket and `show` is most often
pointed at one. It skips a missing status directory rather than refusing, since
an error printed over a shell prompt is worse than no candidates, and the
listing still refuses one so a person can act on it. The filters all still
apply, and an unknown `--campaign` is still refused ahead of everything.
Adding the mode tipped `cmd_ls` over the boundary AGENTS.md names, so it takes an
`LsArgs`, the way `add` took `AddArgs`.
More than the criteria asked, since the cost of each was a name in a list:
tickets are completed for `set`, `append`, `relate`, `check`, `uncheck`, the
second argument of `chown` and `assign`, and `relate`'s three target flags, plus
the skill names read off `install::SKILLS`. The three lists are kept honest by
tests that walk the clap definition and fail on a ticket-taking subcommand
missing from them, or listed at the wrong position. Nested subcommands are not
walked: `campaign` is the only one, none of its three takes a ticket, and the
token counting could not tell them apart if one did.
Position is counted rather than inferred. `__worklane_first_arg_of` reads
`$tokens[2]` and the token count instead of `__fish_seen_subcommand_from`,
because `campaign ls` and `campaign show` are also an `ls` and a `show` that fish
has seen, and matching against the ticket list to find the position would run
worklane again inside the condition.
Files are turned off for the command and back on for `tui`, which is the one
argument that really is a path. The ticket said worklane takes no file arguments;
it takes those.
Campaigns and tags are completed nowhere, which needs a listing they do not have:
55ee6e3. And since fish runs whatever is on PATH, the completions are only as
current as the installed binary, an older one without `--ids` completing
nothing. That is in the README beside the install line.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`relate` is the only writer of the section, the way `chown` is the only writer of
Owner: a relation names a target that has to be resolved to a uuid first, so `set`
and `append` are deliberately kept out of it. One flag per kind, so an unknown kind
is a usage error rather than a line refused on the way back out.
One direction is stored and the inverse is derived by a scan. `blocked by` goes on
the gated ticket, whose move `mv` now refuses while the target is not done, naming
every open blocker; `-f` bypasses it beside the backward and skipping moves. A
target that is not on the board warns and allows the move.
The rendered block is built outside `content_trim` and passed in, since half of it
comes from other tickets. The section is created on demand rather than by `add`, so
a ticket written before it existed gains it without being regenerated.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`cargo clippy --all-targets` was reporting 96 warnings, 14 of them in the
binary. It is now clean from a cold cache, and the 211 tests still pass.
`clippy --fix` took the mechanical ones: needless borrows, `map_or` that is
`is_some_and`, `push_str` of a single character, manual `split_once`, and
`&PathBuf` parameters in the test fixtures. It also moved the `handlers.rs`
test module to the end of the file, which is what `items_after_test_module`
was pointing at.
Three by hand. `cmd_add` took nine parameters threaded from `main`, and now
takes `AddArgs`, which is how `set`, `append` and `check` already pass theirs;
the handler destructures it so the body reads as before, and `add --help` is
unchanged. The collapsed `if` in `content_trim` needed reindenting, since
`--fix` left its body at the old depth. And the two `split_once` rewrites read
as `.split_once(..).map(|(_, value)| value)` rather than clippy's `.map(|x|
x.1)`.
The two eight-argument `create_ticket` test fixtures keep an
`allow(too_many_arguments)` carrying the reason: the lint is right that
twenty-five positional call sites read as a wall of strings, but replacing them
with a named-field struct is a refactor and not a warning sweep. a34a316 tracks
it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing could change a ticket after it was created. mv wrote status, comment
appended a file, and that was the whole set of mutations, so correcting a typo
or adding a criterion meant hand editing the markdown.
Two commands rather than the one vague "edit" the ticket described. set replaces
a field, append adds to a section, so the verb carries the meaning instead of a
prefix on seven flag names, and append only offers the three sections that hold
multiple lines. Owner is absent from both, it belongs to the chown command filed
alongside this, and status stays mv's. One field, one writer.
Sections are a table, DESCRIPTION, ACCEPTANCE and PLAN, each carrying a heading,
a label, the placeholder add writes when empty, and a kind. Both commands walk
it, so a section added later is one entry rather than edits in two places.
Everything is targeted line surgery and never a regenerated file, which is what
keeps a ticked criterion ticked and a handwritten section intact when an
unrelated field changes. Appending to a numbered section continues from the
count already there rather than renumbering above it, so a handwritten line
survives exactly as written. Appending to an empty section replaces the
placeholder instead of following it.
An empty value is a paragraph break for a section and a usage error for a
scalar, since it looks like a way to clear a field and clearing is not supported
yet. No-op detection compares the whole file before and after each edit, so a
field set to the value it already holds is reported unchanged and nothing is
written.
Two things came out of building it. move_ticket_file's staged write is extracted
as write_then_replace, now the only way any ticket file is written. And the file
is located by uuid rather than by title: titles are not unique, add allows
duplicates on purpose, and the old title scan meant mv <uuid-of-second> moved
the first ticket sharing its title. Reproduced, fixed, and pinned by a test.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
cmd_mv renamed the ticket into its new directory and only then wrote the updated
content, so a write that failed left the ticket in the target directory still
claiming the old status. Reproduced with a read-only ticket file: the move
reported a bare "Permission denied" and left the file in committed/ carrying
"Status: backlog".
move_ticket_file now stages the content in a temp file, renames it over the
source, and only then renames the file into the target directory. Two atomic
steps, so a partial write is discarded and the original is untouched. The other
obvious order, writing to the target and deleting the source afterwards, was
rejected because it has the ticket in two directories at once.
The worst case left is a ticket still in its old directory with a Status one
move ahead, which the next mv corrects since the directory is what decides the
current status. Tested, including the retry.
The temp file is staged under .worklane/ rather than beside the ticket, so a
leftover from a hard kill is invisible to ticket lookup and to the listing
instead of appearing as a stray untitled ticket. IO errors now name the ticket
and the path rather than propagating bare.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
cmd_mv spliced the metadata line by byte offset and wrote the field name
as **-Status**, because the format string re-added the "- " prefix that
the preceding slice already carried. parse_ticket_field could never read
Status back, and the next move failed to find "- **Status**" so it
silently skipped the rewrite, leaving the ticket in one status directory
while its metadata claimed another.
Replace the splicing with set_status_field, a line based rewrite that
keeps every other line verbatim, inserts no stray newline, and errors
when the Metadata section has no Status field. It also accepts the
**-Status** spelling so tickets damaged by the old code are repaired as
they move.
The content is now computed before the rename, so a ticket without a
Status field is never half-moved.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>