Done only grows. It already holds more tickets than the other three columns
together, so a quarter of the width was going to the column least often read
while the ones being worked got squeezed for it.
Not a new opinion: `ls` already counts done in its summary and leaves it out of
the listing below. The board now does the same, and the footer carries the
count while the column is hidden, which is the board's version of that summary
line. It reads `d show done (17)` while hidden and `d hide done` while shown,
so the count only appears where a column heading is not already carrying it.
The modal footer names the key too, since it works with a ticket open.
Hiding is a change to what is drawn, never to what is read. `reload` still
scans the done directory and `digest` still watches it, so the count is right
and revealing the column needs no rescan.
`visible()` returns a prefix of the columns rather than a filter, which is what
keeps `column` and `offsets` valid as indices into either. It is derived from
where DONE actually sits rather than assuming the last slot, and a test pins
done as last: a status inserted after it would otherwise hide two columns in
silence. DONE is now a constant, since `ls` and the board are two readers of
the same rule.
Hiding the column under the selection moves the selection to the last drawn
column and closes an open detail view. Refreshing the modal onto whichever
ticket the selection landed on was the alternative, and it swaps what someone
is reading without saying so, which is how a person acts on the wrong ticket.
Showing done again is a no-op for the selection, since a column is appended
rather than inserted.
Three existing tests asserted a column heading with `screen.contains("done
(0)")` over the whole render, and the new footer holds that string whether the
column is drawn or not, so all three passed for the wrong reason the moment
done was hidden. They now assert against the top border row through a
`headings()` helper, with `footer()` beside it.
The choice is not remembered between runs: worklane has no config file, and one
flag is not a reason to start one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`cargo clippy --all-targets` was reporting 96 warnings, 14 of them in the
binary. It is now clean from a cold cache, and the 211 tests still pass.
`clippy --fix` took the mechanical ones: needless borrows, `map_or` that is
`is_some_and`, `push_str` of a single character, manual `split_once`, and
`&PathBuf` parameters in the test fixtures. It also moved the `handlers.rs`
test module to the end of the file, which is what `items_after_test_module`
was pointing at.
Three by hand. `cmd_add` took nine parameters threaded from `main`, and now
takes `AddArgs`, which is how `set`, `append` and `check` already pass theirs;
the handler destructures it so the body reads as before, and `add --help` is
unchanged. The collapsed `if` in `content_trim` needed reindenting, since
`--fix` left its body at the old depth. And the two `split_once` rewrites read
as `.split_once(..).map(|(_, value)| value)` rather than clippy's `.map(|x|
x.1)`.
The two eight-argument `create_ticket` test fixtures keep an
`allow(too_many_arguments)` carrying the reason: the lint is right that
twenty-five positional call sites read as a wall of strings, but replacing them
with a named-field struct is a refactor and not a warning sweep. a34a316 tracks
it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
worklane's agent instructions only existed for someone with the repo checked
out. Anyone who installed the binary with cargo install got no document at
all, because cargo install places binaries and nothing else.
The skill now lives at assets/SKILL.md and is embedded with include_str, so an
installed copy can never be a different version from the binary that describes
it. `worklane install-skill` writes it, `--print` sends it to stdout so a
modified copy can be diffed, and a copy that was edited is reported and left
alone unless --force: it may have been changed on purpose, and silently
discarding that is worse than stopping.
One path serves both agents, ~/.claude/skills/worklane/SKILL.md. That was
settled empirically rather than from documentation: opencode 1.15.10 loads
~/.claude/skills as an external skill source alongside its own
~/.config/opencode/skill, and with HOME pointed at a temp directory holding
only what install-skill wrote, `opencode debug skill` lists the document under
the name worklane. Writing opencode's own path as well would be two copies of
one document, free to drift, for no gain.
The document is new rather than the one under .opencode, which is the user's
and not this repo's to ship. The ticket-workflow prose moved out of AGENTS.md
into it, so how to use worklane has one writer, and AGENTS.md points there.
The mechanism is in install.rs rather than skill.rs, and install() takes its
root as an argument: install-tool is coming, it needs a different root and the
same compare-and-refuse logic, and passing the root is what lets the tests
install into a temp directory instead of the home of whoever runs the suite.
Three tests guard the document itself, which is the part that goes stale
quietly: the frontmatter has to parse, every `worklane <x>` it shows has to be
a real subcommand, and every subcommand outside NOT_FOR_AGENTS has to appear in
it, so a new command cannot ship invisible to an agent.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The detail view had no scrolling at all: no offset on Board, nothing passed
to Paragraph::scroll, so anything past the height of the overlay was
unreachable. Every ticket in this repo is longer than that. The footer read
"↑↓ scroll" while up and down moved the selection, so it named a key that did
nothing and sent the reader looking for their own mistake.
The scroll goes on pgup and pgdn rather than taking up and down. Up and down
stay on the selection with the modal open, so a whole column can be read
without closing it and the modal follows the selection. That is worth more
than the two keys.
The offset is clamped against the wrapped line count from
Paragraph::line_count, which is why ratatui now carries the
unstable-rendered-line-info feature. The paragraph wraps on words, so a clamp
on the raw lines would stop short of the end or run past it into blank space,
and counting the wrapping by hand would only agree with the widget until one
of the two changed. The clamp runs on the keypress and again in the draw,
since the terminal can be resized between them and a tick can shorten the
ticket under a reader who is already at the end.
The offset resets when the selection moves and when the modal is closed, so a
ticket opens at its top. It deliberately does not reset on a tick: an edit
elsewhere in the tree must not throw the reader back to the top of what they
are reading.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
worklane was one-shot commands only, so reading the board meant running ls again
and again and nothing ever showed the four statuses side by side, which is the
one view a kanban flow is for.
Four columns, a card per ticket carrying the priority mark, short id, title,
owner and due. Arrows or hjkl to move, enter for the detail view, q to quit.
Read only: moving a card by keypress is a follow-up, kept out until the watch
and render loop were solid.
Modelled on frig throughout, same crates and same shape: event poll on a 250ms
timeout so the tick runs when nobody is typing, a panic hook that leaves the
alternate screen before the backtrace, and the terminal restored on the error
path as well as on quit. A bare worklane opens it, as a bare frig does, so
Cli::command is now an Option.
The watch looks at files, not directories. A directory's mtime only moves on
create and rename, so a ticket edited in place would be missed; the digest
hashes every ticket and comment file's path, length and mtime. Comment files
are in it because a comment added elsewhere has to reach the detail view. It
guards the rescan rather than the draw, since ratatui diffs its buffer but
reading the tree every frame would not be free. notify is deliberately not a
dependency, and the reason is on the ticket.
Two orderings are deliberate. The worklane directory is looked for before the
terminal, so running outside one gives the usual message rather than a complaint
about the tty, and both errors stay testable without a pty. And a missing tty is
refused by name, since raw mode on a pipe fails with a bare "No such device or
address" that explains nothing.
The palette is now a Color enum rather than a string, so the escape the CLI
writes and the ratatui colour the board draws come from one definition and a
colour missing from either is a compile error. That retires the test which
existed only to catch a name with no entry, the failure that once left magenta
undefined.
Cards come from collect_ticket_items, so there is no second parser;
TicketItem gained the path the detail view opens. content_trim and
format_comments_with take the colour decision, because ratatui draws spans and
would print an escape as literal bytes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Criteria are stored as - [ ] lines and nothing could tick one, so marking
progress meant replacing the whole list through set, losing the state of every
other item.
check and uncheck are separate commands rather than one verb with a flag,
sharing CheckArgs and cmd_check. The criterion is an index first and a substring
second, so a criterion whose text is literally "2" is reachable only by
substring. A number out of range is reported as a bad index rather than as a
substring that missed.
Only the character between the brackets is spliced, so the text keeps whatever
indentation and spacing it had. Criteria are counted inside the Acceptance
Criteria section only, so a checkbox written into a description is not a
criterion and a handwritten line in the section takes no number.
With the criterion omitted, the criteria are listed and the number asked for
when stdin is a terminal. Where it is not, the same list comes back as an error
instead. Prompting regardless would leave the opencode wrapper blocked on a
stdin that never closes, and that is the choice resolve_ticket already makes for
an ambiguous match, for the same reason: the wrapper keeps stderr and throws on
the code, so a list printed to stdout would be discarded.
Any listing of a subset keeps the real numbers. Renumbering the matches from one
would contradict the advice to use the number and point at the wrong criterion.
show now numbers the criteria as "1. [x] text", so the index is visible where
the ticket is read. That also drops a manual prefix strip, so clippy is one
warning below where it started.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Nothing could change a ticket after it was created. mv wrote status, comment
appended a file, and that was the whole set of mutations, so correcting a typo
or adding a criterion meant hand editing the markdown.
Two commands rather than the one vague "edit" the ticket described. set replaces
a field, append adds to a section, so the verb carries the meaning instead of a
prefix on seven flag names, and append only offers the three sections that hold
multiple lines. Owner is absent from both, it belongs to the chown command filed
alongside this, and status stays mv's. One field, one writer.
Sections are a table, DESCRIPTION, ACCEPTANCE and PLAN, each carrying a heading,
a label, the placeholder add writes when empty, and a kind. Both commands walk
it, so a section added later is one entry rather than edits in two places.
Everything is targeted line surgery and never a regenerated file, which is what
keeps a ticked criterion ticked and a handwritten section intact when an
unrelated field changes. Appending to a numbered section continues from the
count already there rather than renumbering above it, so a handwritten line
survives exactly as written. Appending to an empty section replaces the
placeholder instead of following it.
An empty value is a paragraph break for a section and a usage error for a
scalar, since it looks like a way to clear a field and clearing is not supported
yet. No-op detection compares the whole file before and after each edit, so a
field set to the value it already holds is reported unchanged and nothing is
written.
Two things came out of building it. move_ticket_file's staged write is extracted
as write_then_replace, now the only way any ticket file is written. And the file
is located by uuid rather than by title: titles are not unique, add allows
duplicates on purpose, and the old title scan meant mv <uuid-of-second> moved
the first ticket sharing its title. Reproduced, fixed, and pinned by a test.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Rust sets SIGPIPE to SIG_IGN at startup, so a write to a closed pipe returned
EPIPE and println panicked on it. `worklane ls | head -3` printed a panic and a
backtrace on stderr instead of three lines, which reads as a real fault and is
not what any other tool in a pipeline does.
main now restores the default disposition before any output, the same six lines
frig carries for the same reason. The cost is that a truncated pipe kills the
process with signal 13, so a shell reports 141 rather than 101. That is what
head and sort do, and it is now in the README next to the other exit codes.
The tests drop the read end rather than racing head for it, over a listing large
enough to exceed the 64 KiB a pipe holds, since a smaller one lands entirely in
the buffer and proves nothing. A shell pipeline into head is covered too, and
the exit codes for a real error and a usage mistake are pinned so the reset
cannot quietly change them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Priority lived in tags, as p1 to p3, which ls could neither sort nor
filter on, nothing validated, and a typo like P1 passed silently. ls
sorted by title only, so a backlog of any size gave no ordering signal.
Levels are 1 to 5 with 1 most urgent, matching what the tags meant.
Omitting the flag leaves the field _Not set_, like Due and Owner: there is
no implicit middle level, because a priority nobody chose is worse than
none. clap rejects anything outside the range before a ticket is written.
Priority parses to three states rather than two. A stored value outside
the range is Invalid, kept distinct from Unset, so a typo cannot read as
"no priority": it shows as ? and sorts just ahead of the unset tail.
ls sorts on priority and falls back to the old title sort, and --priority
filters, composing with the status filter in both the grouped and the
filtered listing. TicketItem becomes a struct, since a sixth tuple field
was past reading.
Migrated the 31 tickets already carrying p1 to p3 tags: the level moves to
the field and the tag is dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>