Commit Graph
17 Commits
Author SHA1 Message Date
Ansho ReiandClaude Opus 5 5a7cfeb849 (b8aa66b) Evaluate ticket resolution in tiers, from four characters up, and bump to 0.4.0
resolve_ticket ORed the uuid prefix, title and filename predicates into one flat
list, so an exact prefix match was reported as ambiguous against any title that
merely mentioned that id. Reproduced: `show 641e3d5` on a board where another
ticket's title quoted it failed with "Multiple tickets found", and told the user
to use the displayed id, which was the id they had just used.

The three tiers are now evaluated in order and the first non-empty one wins
outright, which is what AGENTS.md always claimed.

The ticket also asked for prefix matching to require eight characters, and that
is not implemented. The guard it replaced read short_id.len() >= 8 where
short_id was always the full uuid, so it was always true and any length already
worked. Eight would have regressed that: ls prints seven characters, so the id
the tool displays would drop out of the uuid tier and lose to any title quoting
it, which is the very bug above. MIN_ID_SEARCH is four, so a short search is
still text and `show 641` remains a title search.

Docs corrected in four places that all stated the eight character rule: README,
AGENTS.md, the opencode tool descriptions and the kanban skill.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 23:38:29 +02:00
Ansho ReiandClaude Opus 5 e20396ce6b (322150c) Make mv crash-safe by writing before renaming, and bump to 0.3.3
cmd_mv renamed the ticket into its new directory and only then wrote the updated
content, so a write that failed left the ticket in the target directory still
claiming the old status. Reproduced with a read-only ticket file: the move
reported a bare "Permission denied" and left the file in committed/ carrying
"Status: backlog".

move_ticket_file now stages the content in a temp file, renames it over the
source, and only then renames the file into the target directory. Two atomic
steps, so a partial write is discarded and the original is untouched. The other
obvious order, writing to the target and deleting the source afterwards, was
rejected because it has the ticket in two directories at once.

The worst case left is a ticket still in its old directory with a Status one
move ahead, which the next mv corrects since the directory is what decides the
current status. Tested, including the retry.

The temp file is staged under .worklane/ rather than beside the ticket, so a
leftover from a hard kill is invisible to ticket lookup and to the listing
instead of appearing as a stray untitled ticket. IO errors now name the ticket
and the path rather than propagating bare.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 23:12:17 +02:00
Ansho ReiandClaude Opus 5 f5204f6d8b (866a4eb) Accept prose values that begin with a hyphen, and bump to 0.3.2
clap read any value starting with a hyphen as a flag, so a criterion quoting
--print was refused with "unexpected argument found" and no ticket was written
at all. Ticket text quotes flag names constantly, and the space form is what
both a person and the opencode wrapper produce, so the failure was routine.

allow_hyphen_values on the five arguments that carry prose: add --title,
--description, --acceptance, --plan, and the comment body. The trade is that a
genuinely mistyped flag there now lands as content instead of raising a usage
error, which is the right way round for prose and the wrong way round for
anything else, so due, priority, tags, owner and status are left alone and still
fail with exit 2. Written down in AGENTS.md.

The bare double hyphen is the one shape this does not reach: as an option value
it is stored as text, but in a positional it is clap's end-of-options marker and
is consumed before assignment. A comment body of exactly -- therefore needs its
own separator. Without it the body is reported missing and nothing is written,
so it is a clear failure rather than a silent drop. Tested, along with the
ordering that lets mv reach a hyphen-leading title.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 18:00:52 +02:00
Ansho ReiandClaude Opus 5 b28ddb9210 (eed7309) Die quietly on a truncated pipe, and bump to 0.3.1
Rust sets SIGPIPE to SIG_IGN at startup, so a write to a closed pipe returned
EPIPE and println panicked on it. `worklane ls | head -3` printed a panic and a
backtrace on stderr instead of three lines, which reads as a real fault and is
not what any other tool in a pipeline does.

main now restores the default disposition before any output, the same six lines
frig carries for the same reason. The cost is that a truncated pipe kills the
process with signal 13, so a shell reports 141 rather than 101. That is what
head and sort do, and it is now in the README next to the other exit codes.

The tests drop the read end rather than racing head for it, over a listing large
enough to exceed the 64 KiB a pipe holds, since a smaller one lands entirely in
the buffer and proves nothing. A shell pipeline into head is covered too, and
the exit codes for a real error and a usage mistake are pinned so the reset
cannot quietly change them.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:34:45 +02:00
Ansho ReiandClaude Opus 5 f557437f62 (277a527) Render the metadata section as an aligned table, and bump to 0.3.0
show printed the Metadata block as the markdown list the file stores, so with
seven fields the values did not line up and the block read as file contents
rather than as a summary. It now renders as two aligned columns: field names
left, values right. The file is untouched, this is display only.

content_trim_colored streamed one line at a time, so nothing ever saw the whole
section. The Metadata lines are now taken as a block, since the field column
cannot be sized until every name has been seen.

Column width is measured on the raw names, in characters, and padding is applied
before anything is styled. Measuring a coloured name counts its escape sequences
towards its width, which tilts the table with colour on and not with it off.
paint() is color_text() with the decision passed in, which is what lets a test
render both ways in one process and compare.

colorize_metadata is folded into the renderer, its only caller. A line in the
section that is not a field is carried through rather than dropped, so a hand
written note survives, and an unrecognised field still gets a row.

Plain columns, no border characters: nothing to degrade on a font that lacks
them, and the section rules already carry the only box drawing here.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 17:12:57 +02:00
Ansho ReiandClaude Opus 5 ab1dae098c (641e3d5) Scope metadata field lookup to the Metadata section, and bump to 0.2.1
parse_ticket_field searched every line of the file with contains, and
set_status_field rewrote the first line starting with the Status marker
wherever it sat. Tickets in this repo quote field markers in their
descriptions, so a description list shaped like metadata was read in place
of the real value and rewritten by mv, leaving the metadata stale.

Both now scan only the lines under the Metadata heading and match on a line
prefix rather than a substring. A file with no Metadata heading has no
fields, so mv reports the missing Status field instead of editing prose.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 16:38:35 +02:00
Ansho ReiandClaude Opus 5 2503f9aee9 (3b7edd7) Show priority as a glyph, and bump to 0.2.0
A bare digit in a listing is easy to skip over. Levels render as a
two-segment meter that empties as the level rises: ●● 1, ●◐ 2, ●○ 3,
◐○ 4, ○○ 5, with ·· for unset and ?? for a value outside the range.

Only ●, ◐, ○ and · are used, because they are what frig draws for its
status indicators and so are known to be in the terminal font. The first
cut of this used the quadrant circles ◕ and ◔, which are in a quarter as
many fonts, so terminals substituted them from a fallback that drew them
oversized and the column came out ragged. Two cells of a three-level ramp
gives five steps of ink, 2, 1.5, 1, 0.5, 0, without leaving that safe set.
Tests pin the safe set, the equal width and the monotonic emptying.

The mark carries the level on its own, because colour cannot. Output is
colourless whenever it is piped, which is how the opencode tools and every
script read it, and NO_COLOR turns it off in a terminal too. Colour only
accentuates: brightred, red, orange, cyan, grey, skipping green because
green means title.

The number counts up while the meter empties, since 1 is the most urgent.
That is the convention, but it reads as a bug unless written down, so it
is in AGENTS.md and in the legend.

Both the ramp and the legend come from priority_mark, and `ls --help`
prints the legend, since nothing in a listing explains a mark. brightred
is indexed like grey, for the same reason: it is the spelling that
renders.

Minor bump: two new flags, a new metadata field and a changed ls row,
covering dca0b61 and this ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:50:09 +02:00
Ansho ReiandClaude Opus 5 ddbd45e332 (dca0b61) Add priority as a ticket field
Priority lived in tags, as p1 to p3, which ls could neither sort nor
filter on, nothing validated, and a typo like P1 passed silently. ls
sorted by title only, so a backlog of any size gave no ordering signal.

Levels are 1 to 5 with 1 most urgent, matching what the tags meant.
Omitting the flag leaves the field _Not set_, like Due and Owner: there is
no implicit middle level, because a priority nobody chose is worse than
none. clap rejects anything outside the range before a ticket is written.

Priority parses to three states rather than two. A stored value outside
the range is Invalid, kept distinct from Unset, so a typo cannot read as
"no priority": it shows as ? and sorts just ahead of the unset tail.

ls sorts on priority and falls back to the old title sort, and --priority
filters, composing with the status filter in both the grouped and the
filtered listing. TicketItem becomes a struct, since a sixth tuple field
was past reading.

Migrated the 31 tickets already carrying p1 to p3 tags: the level moves to
the field and the tag is dropped.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:36:19 +02:00
Ansho ReiandClaude Opus 5 b7781a830c (482ff01) Grey unset Due and Owner in ls, and bump to 0.1.2
display_ticket_items printed both fields raw, so a ticket with no due date
showed _Not set_ in the default foreground. show already honoured the
guideline through colorize_metadata, leaving the listing as the one place
that ignored it. Reuses is_unknown_value rather than matching the markers
a second time.

Grey is indexed colour 8 in the 256-colour form. Two SGR spellings were
tried against a real terminal and both read as white: 90 leans on the
palette's bright-black slot, and 37 can sit right on top of the default
foreground. \x1b[38;5;8m is byte for byte what crossterm emits for
ratatui's Color::DarkGray, which is the grey frig and pantop already use
for dimmed rows, so this is the spelling known to render here. Pinned by a
test and written down in AGENTS.md, since only an eye in a real terminal
would catch it drifting back.

Patch bump covering the three colour tickets, 9991698, 934bf1a and this
one, as one body of work: nothing new, three places where output did not
do what the guideline said.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:24:42 +02:00
Ansho ReiandClaude Opus 5 3fcb0ddc0a Require a local tag alongside every version bump
Records the rule in the Version Bumps section: a bump carries a matching
annotated v<version> tag on the bump commit, kept local unless a push is
asked for. Tagged v0.1.1 on 8563218 retroactively, which was bumped
before the rule existed.

Docs only, so no bump and no tag for this one.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 15:01:56 +02:00
Ansho ReiandClaude Opus 5 54569b2c85 Require a version bump decision before every commit
Records the rule in the Git Workflow section: decide whether a change
warrants a bump, ask before making one, no bump for docs, tests or
fixups, and bump once on the final commit when work spans several.

Docs only, so no bump for this one.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-20 14:54:43 +02:00
Anshorei 2a96abd3b0 (bdfd5f2) Apply color guidelines to codebase 2026-05-15 19:11:05 +02:00
Anshorei 01e2daca13 Update agents file 2026-05-15 13:10:38 +02:00
Anshorei cd19e4e6cf (a0dc5e3) Display comments under worklane show 2026-05-15 12:00:22 +02:00
Anshorei bc3ee0c53b (339c65a) Add comment command 2026-05-15 11:11:40 +02:00
Anshorei a1bf4df880 (dd8a0c9) Add git user as default owner 2026-05-15 02:42:50 +02:00
Anshorei aef8002d23 (101c2444) Add colours to ls command 2026-05-15 02:18:04 +02:00