(9b7fa7d) Expand the campaign frame with enter

Three rows of prose was the right default and the wrong ceiling. enter
while the frame holds the selection gives it half the board, enter again
gives the rows back, and pgup and pgdn go on doing what they do against
whichever height it is at.

Half of what the frame and the columns divide, which is the screen less
the tab row and the footer. Half rather than most of it for the same
reason the frame is not an overlay: the columns below are the campaign's
members, and a reader inspecting the campaign has to go on seeing what
it is made of. So `Chrome::campaign` is an `Option<FrameSize>` rather
than a bool and `campaign_rows` takes a height, resolved in `frame_rows`
because that is the one place that already has an area to take a share
of, which keeps `Chrome` itself pure.

Bounded at both ends, and the upper bound is the one that matters:
`Constraint::Min(COLUMN_MIN_ROWS)` would take rows back from a frame
that asked for too many, silently, and the frame's own measurement would
then disagree with what is drawn. Floored at the collapsed height, since
expanding must never shrink the frame, so a board too short to divide
gives the collapsed height back rather than one nothing measured. Swept
over every height from 4 to 60, tabbed and not.

q does not gain a layer and the arrow keys do not take the height back.
The expanded frame is the frame at its other height, not a thing laid
over the board, so q goes on taking the campaign filter off from either
and enter is the only key that undoes what enter did. The height
outlives the selection for the same reason: it is a view of the campaign
the reader chose, so the columns stay short with the selection on a
card. `dismiss` and `select_card` are untouched, and two tests pin that.

`enter` routes through `Board::toggle_focused` rather than in the
`main.rs` arm, the rule `dismiss` and `scroll_page` follow. It was inert
on the frame for free before, because `Tab::selected` hands back nothing
there and `toggle_detail` had nothing to open; that answer is now the
thing in the way, and AGENTS.md and `Tab::selected`'s doc are amended
rather than left describing the key by what it used to do.

The toggle re-clamps the frame offset through `scroll_frame(0, screen)`.
A taller viewport has a smaller last offset, so where the reader was can
end up past the end of the frame they just asked for, and the next pgup
would count down from a number the frame never showed.

Criterion 13 is not done: 2a83bd4 has not landed, so there is no tag
frame to give a second height to. What it inherits is on the ticket, and
all of it is generic rather than campaign-specific.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
Ansho Rei
2026-08-24 03:08:39 +02:00
co-authored by Claude Opus 5
parent af1ef1f97f
commit dd2b457bff
6 changed files with 509 additions and 24 deletions
+9 -4
View File
@@ -235,18 +235,23 @@ and this file is for what someone changing worklane's own code needs.
- **A campaign the board does not hold labels nothing**, the answer `mark_blocked` gives a dangling blocker. `campaign_cell` renders that case as `_missing_` because a metadata table is a place to report a dangling reference; a card is not
- **`c` opens the campaign picker, and taking a campaign filters the tab's columns to its members.** Not a fifth tab: a campaign groups across the flow, so the shape of the answer is the four statuses with fewer cards in them, which is what `campaign show` already answers the question in. Every column is kept, empty ones included. The filter is applied in `reload`, where the columns are built, so nothing downstream has to ask whether a campaign is selected — the board simply holds fewer cards, and `first_match`, `done_count` and the copy key all keep working unchanged
- **`Tab::campaign` is a uuid on the tab, not on the `Board`.** A campaign belongs to one `.worklane`, so a filter carried onto another project's tab would empty it and say nothing about why. It is looked up by uuid rather than held as an index, and a selection whose campaign has left the board is cleared by `reload` rather than left filtering the board to nothing
- **The frame above the columns is `Chrome::CAMPAIGN_ROWS` rows, and `Chrome` is what every measurement takes.** `frame_rows` grew a row, so the two bools that decide the geometry became one `Chrome`, copied from `Board::chrome`: adjacent same-typed parameters are what the Rust Style rule warns about, and the draw and `follow_selection` have to measure one answer or a keypress scrolls against a board the next frame does not draw. The row indices are named (`TAB_ROW`, `CAMPAIGN_ROW`, `BOARD_ROW`, `FOOTER_ROW`), since an index written out by hand goes on meaning what it used to
- **The frame above the columns has two heights, and `Chrome` is what every measurement takes.** `Chrome::campaign` is an `Option<FrameSize>`, not a bool: `None` for a tab showing the whole board, and `Collapsed` or `Expanded` for one filtered to a campaign, because both heights have to be measured the same way by everything that measures the board. `frame_rows` grew a row, so the two bools that decide the geometry became one `Chrome`, copied from `Board::chrome`: adjacent same-typed parameters are what the Rust Style rule warns about, and the draw and `follow_selection` have to measure one answer or a keypress scrolls against a board the next frame does not draw. The row indices are named (`TAB_ROW`, `CAMPAIGN_ROW`, `BOARD_ROW`, `FOOTER_ROW`), since an index written out by hand goes on meaning what it used to
- **The whole description is carried off the one read, and the cut is on the view.** `section_prose` replaced `section_opening`, which cut to the opening line at read time: the campaign file is only in hand while the campaigns directory is being read, so what that read has to carry is everything a view might want, and `CampaignRow::summary` takes the one line the picker draws back off it. Two fields, one cut from the other, are two strings free to come from different reads of the same file
- **`CAMPAIGN_PROSE_ROWS` is a constant, not a height fitted to the description.** Three rows of prose plus a border either side. A frame that grew and shrank with the campaign would resize every column whenever the filter changed, and a reader would look for a card where the previous campaign's description had put it. It does not have to be right for the longest description, because scrolling is what covers the rest — which is also why three was affordable where one row was not
- **`CAMPAIGN_PROSE_ROWS` is the collapsed height, and it is a constant rather than a height fitted to the description.** Three rows of prose plus a border either side. A frame that grew and shrank with the campaign would resize every column whenever the filter changed, and a reader would look for a card where the previous campaign's description had put it. It does not have to be right for the longest description, because scrolling is what covers the rest — which is also why three was affordable where one row was not
- **The expanded height is a share, not a second constant: half of what the frame and the columns divide.** That is the screen less the tab row and the footer, so the split is even between the two of them rather than even against rows neither gets all of. Half rather than most of it for the same reason the frame is not an overlay: the columns below are the campaign's members, and a reader inspecting the campaign has to go on seeing what it is made of. Floored, so the odd row goes to the cards. `Chrome::campaign_rows` takes the height because of this, and `frame_rows` is where it is called, since that is the one place that already has an area to take a share of — which is what keeps `Chrome` itself pure and copyable from `Board::chrome` with no screen to hand
- **The share is bounded at both ends, and `COLUMN_MIN_ROWS` is why.** `Constraint::Min(COLUMN_MIN_ROWS)` would take rows back from a frame that asked for too many, silently, and the frame's own measurement would then disagree with what is drawn — the fault `Chrome` exists to prevent. So the share is capped at what leaves the columns those rows, and floored at `CAMPAIGN_ROWS`, since expanding must never shrink the frame. On a board too short to divide, `enter` gives the collapsed height back rather than a height nothing measured. `the_expanded_share_is_bounded_at_both_ends` sweeps every height from 4 to 60, tabbed and not, because one screen that happens to work says nothing about the arithmetic
- **The frame says the rest of what it has to say on its borders**, the trade the detail overlay makes with its title and its page indicator: `(id) ~codename · Name` on the top one, the standing on the bottom right, and `q board` then the page indicator on the bottom left. Every row spent here is a row of cards
- **The frame's page indicator goes on the bottom border beside `q board`, not on the top beside the title.** The title is cut against the border it sits on, so an indicator up there would shorten a long campaign name the moment its description grew past three rows; and the bottom right is the standing's, which is what the frame is *about* where the indicator is only where the reader has got to in it. Dropped before `q board` when the two cannot both fit, since with a campaign selected the footer's last slot names `ctrl-c quit` and the border is the only place that says `q` gives the board back
- **`Focus` is the third place the selection can be, and `Tab` is what holds it.** The board had a column and a card and `select_card` clamped at zero; up from the top card now reaches the frame and down returns to the column it left, since the column index is never what changed. Per tab beside the filter and the offset, so switching away and back returns to where the tab was left. `Focus::Frame` while no campaign is selected is the one state that must never exist — `select_campaign` and `reload` are what keep it from arising
- **`Tab::selected` hands back nothing while the frame holds the selection.** Every key that acts on a card has to answer for the frame, and the answer for `enter` falls out of this rather than being written into the dispatch. `←→` are inert, because the frame spans the width of the board and moving the column underneath would change nothing on screen. `y` is the exception that earns its place: it copies the campaign's short id, so `y copy id` means the id of the selected thing in every state the selection can be in. No card is drawn reversed there either, since that highlight is what says which ticket a key is about
- **`Tab::selected` hands back nothing while the frame holds the selection.** Every key that acts on a card has to answer for the frame. `←→` are inert, because the frame spans the width of the board and moving the column underneath would change nothing on screen. `y` is the exception that earns its place: it copies the campaign's short id, so `y copy id` means the id of the selected thing in every state the selection can be in. No card is drawn reversed there either, since that highlight is what says which ticket a key is about
- **`enter` routes on the focus through `Board::toggle_focused`: the frame's height on the frame, the overlay on a card.** It used to be inert on the frame for free, because `Tab::selected` hands back nothing and `toggle_detail` therefore had nothing to open. That is no longer an answer, and the routing is in `Board` rather than in the `main.rs` arm for the reason `dismiss` and `scroll_page` are
- **`q` does not gain a layer for the expanded frame, and up and down do not take it back.** The expanded frame is the frame at its other height, not a thing laid over the board, so `q` goes on taking the campaign filter off from either height and `enter` is the only key that undoes what `enter` did. The height outlives the selection for the same reason: it is a view of the campaign the reader chose, so the columns stay short with the selection on a card. `Tab::expanded` sits beside the filter and resets where `select_campaign` and `reload` reset the focus and the offset — a different campaign opens collapsed and at the top of its own description
- **The toggle re-clamps the frame offset, through `scroll_frame(0, screen)`.** A taller viewport has a smaller last offset than a shorter one, so where the reader was can end up past the end of the frame they just asked for. The draw clamps on its own geometry either way, but the stored value has to be clamped too or the next `pgup` counts down from a number the frame never showed. A scroll of no pages is that clamp and nothing else, which keeps it in the one place it lives
- **The frame is out of reach from under an open ticket.** With the overlay open, up and down step through the tickets and it follows, so a selection that reached the frame would have to either close it on an arrow key or leave it showing a ticket nothing is selecting. `an_open_ticket_keeps_the_scroll_keys_from_the_frame` builds that state by hand for exactly this reason: the precedence has to hold whether or not a keypress can reach it
- **The standing comes from the columns, not from a walk of the tree.** While a campaign is selected the columns *are* its members, done included, so `Tab::standing` counts what is already in hand rather than paying what `campaign ls` pays per campaign. Counted over every column, drawn or not: hiding done is a change to what is drawn and never to what is counted
- **The way out is on the frame's own border, not in the footer.** `q board` sits on the thing it takes away, and the footer row was already at its width naming eight keys. Dropped whole when it and the standing would meet, the rule the page indicator follows
- **`c` is named in the footer only on a closed board with nothing selected**, which is where a reader has to find it. Over an open ticket and on a filtered board it is left out: the frame's border then says how to put the campaign away, and the row has no cells to spare. Incomplete rather than wrong, which is the trade this row is allowed to make — what it must never do is name a key by what it used to do
- **The footer has three states, because the selection has three places to be.** An open ticket, the frame, and the cards. On the frame it names `↓ board`, the two scroll keys and `y copy id`, and leaves out `enter` and `←→` because they do nothing there. `↑ frame` is not named on the board, on the same trade `c` is dropped on: the frame is drawn directly above the columns and up is the key that reaches it
- **The footer has three states, because the selection has three places to be.** An open ticket, the frame, and the cards. On the frame it names `↓ board`, `enter expand` or `enter collapse`, the two scroll keys and `y copy id`, and leaves out `←→` because they do nothing there. It has to say which way `enter` goes, since the key is a toggle and the frame is always at one of its two heights. `↑ frame` is not named on the board, on the same trade `c` is dropped on: the frame is drawn directly above the columns and up is the key that reaches it. Nor is the way to collapse an expanded frame named from the cards, which is the same trade again — the frame is right there and `↑` reaches it
- **`picker: Option<Picker>` is the whole mode**, the shape `search` and `detail` use, and `Board::picker_key` runs beside `search_key` ahead of the action arms for the same reason: an open list owns the keyboard, so `d` must not toggle done and `q` must not quit while a campaign is being chosen. `ctrl-c` is the one key it declines and every other control combination is swallowed, or `ctrl-d` would reach the arm bound to `d`
- **The picker's rows are `Tab::campaigns`, not a copy taken when it opened**, so a campaign filed elsewhere appears in an open picker on the next tick. It opens on the campaign already selected, so `c` on a filtered board says where you are as well as offering somewhere to go, and a board with no campaigns gets a `Notice` rather than an empty box that has to be dismissed to learn it was empty
- **A picker row draws a real codename only.** The row opens with the short id, so the card's `~<id>` fallback would print it twice and say nothing the second time