(d637288) Add campaign set, and bump to 0.21.0

`campaign add --codename` was the only writer of the field, so a campaign
already on the board could not be given one without editing the file by
hand -- which is every campaign filed before 0.20.0.

A `campaign set`, not a flag on something narrower: the file has more than
one editable thing, and the moment somebody wants to fix a typo in a title
there would be a second command to design. It carries `--title`, which
renames the file the way `set --title` does, and `--codename`, through the
same parser `campaign add` takes. Built out of `set`'s own parts --
`set_title`, `apply`, `report`, and the whole-file no-op comparison -- so
nothing about writing a field lives twice.

The codename goes through `set_or_insert_metadata_field` rather than
`set_metadata_field`: a campaign filed before the field existed has no such
line, and those are exactly the campaigns this is for. That exposed a
second thing -- `Codename` was not in `METADATA_ORDER`, so an inserted line
landed at the end of the block while `campaign_body` writes it under the
ID, two shapes of one file. It is in the list now, directly after ID.

`save_ticket` split into `save_entry` with `save_ticket` and
`save_campaign` as named wrappers, so a campaign gets the same write-then-
rename a ticket has rather than a second copy of it. `write_then_replace`
and `find_entry_file` take the noun, so a failure says "campaign" where it
is one.

No `--description`, filed as 32e98ab: `set` and `append` are a pair for a
prose section, and replacing a description with no way to add a paragraph
is the half that loses the rest of it. No `--owner` and no `--clear`, each
for a reason recorded on the ticket.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
Ansho Rei
2026-08-23 12:22:59 +02:00
co-authored by Claude Opus 5
parent 528566d103
commit 72dbdec2ec
12 changed files with 463 additions and 33 deletions
+5 -1
View File
@@ -93,7 +93,7 @@ and this file is for what someone changing worklane's own code needs.
- **Position is counted, not inferred.** The four `__worklane_*` predicates all read `$tokens[2]` and the token count rather than using `__fish_seen_subcommand_from`, because `campaign ls` and `campaign show` are also an `ls` and a `show` that fish has seen, and because matching against the ticket list would run worklane again inside the condition. `first_arg_of` and `second_arg_of` count a top-level command's arguments, `nested_arg_of` matches a parent and a child so `campaign show <TAB>` can be told from `chown alice <TAB>`, which sit at the same token count, and `command_is` asks only which command this is, at any position in it
- **Every rule carrying `-l` needs a `__worklane_command_is`, and `every_rule_naming_an_option_is_scoped_to_a_command` is what enforces it.** A bare `complete -c worklane -l tag` does not just complete that option's values, it tells fish the whole tool accepts `--tag`: `worklane init --<TAB>` offered six options that only `relate` and `ls` have. Fixed in 55ee6e3. `__fish_seen_subcommand_from ls` is not the scope to use, for the nesting reason above
- **The five completion lists are kept honest by tests** that walk the clap definition and fail on an argument left out of them. `TICKET_COMMANDS` and `TICKET_SECOND_COMMANDS` by position, `TICKET_FLAGS`, `CAMPAIGN_COMMANDS`, `CAMPAIGN_NESTED_COMMANDS`, `CAMPAIGN_FLAGS` and `TAG_FLAGS` likewise. The walk is one function, `every_argument`, since the tests differ only in the id they look for. Each also asserts *how many* it found, so a walker that stopped finding arguments fails rather than passing every assertion by never running them
- **A campaign is named in three shapes and a tag in one**, which is why the lists are not one list: a campaign is `assign`'s first positional, `campaign show`'s only argument and `ls --campaign`'s value, and each needs a different fish rule. A tag is only ever an option value, and its values come from a different command
- **A campaign is named in three shapes and a tag in one**, which is why the lists are not one list: a campaign is `assign`'s first positional, the first argument of `campaign show` and `campaign set`, and `ls --campaign`'s value, and each needs a different fish rule. A tag is only ever an option value, and its values come from a different command
- **`ls --ids` is the machine-readable listing**, and one of the three outputs in the tree meant to be parsed: the short id, a tab, the title, unstyled. Two fields because fish reads what follows a tab as the description and a script reads `cut -f1`. It includes done, which the decorated listing leaves out, because a completion has to be able to name a finished ticket, and it skips a missing status directory rather than refusing, because an error printed over a shell prompt is worse than no candidates. The filters still apply, and an unknown `--campaign` is still refused
- **`campaign ls --ids` is the same flag and the same two fields for the other object**, and it deliberately skips the member counting the decorated listing does: `members()` reads every ticket on the board, and the caller here is a shell filling in candidates on a keypress. It also prints nothing on an empty board, where the decorated listing prints a sentence, because a sentence offered as a candidate is worse than no candidates
- **`worklane tags` is the third, and it is a command rather than a mode on `ls`.** Two reasons: `ls --tag <tag>` answers what carries a tag and cannot answer what tags exist, which is the question a grooming sweep starts from, and a `--tags` beside a `--tag` is one letter from a filter that means something else. Alphabetical and case sensitive, matching the filter, so `bug` and `Bug` list separately and land next to each other, which is where a near-duplicate is spotted. Every status, done included: a tag that has fallen out of use is still part of what the vocabulary has been. `assets/PLAN.md` used to tell the agent to count tags with a `show` per ticket, and now points here
@@ -178,6 +178,10 @@ and this file is for what someone changing worklane's own code needs.
- `campaign ls` scans the status directories **once per campaign** to count members. That is a scan per row rather than one walk reused, and it is deliberate: the map-from-uuid version is worth writing when a board has enough campaigns to notice
- **The TUI got a card label and a frame, not a campaign tab.** 61879a4 decided it. A tab would have had to answer what its columns are, and a campaign groups *across* the flow rather than within one status, so the honest answer is the four statuses filtered — which is a filter on the board it already has rather than a fifth tab. So: a label on the card, a frame above the columns while one is selected, and `c` for the picker. The cost the earlier decision balked at, a campaigns read per reload, is paid once per project in `columns_of` and is what names the label; see The Board View
- **A campaign is named by its codename on the board, and by its short id when it has none.** The uuid does not fit on a card and the title is a sentence, which is the gap `Codename` fills. `campaign_label` builds it in one place, as a `Cell`, so the CLI paints it and the board makes a span of it; the mark is `CAMPAIGN_MARK`, `~`, beside `#` for a tag
- **`campaign set` is the only writer of a filed campaign's fields, and it carries the two scalars.** d637288 decided it: a `set` rather than a flag on something narrower, because the file has more than one editable thing and the moment somebody wants to fix a typo in a title there would be a second command to design. `--title`, which renames the file the way `set --title` does, and `--codename`. `campaign add` writing a field at creation is not a second writer, exactly as `add --title` and `set --title` coexist
- **No `campaign set --description`, and that is the line, not an oversight.** `set` and `append` are a pair for a prose section: a way to replace a description with no way to add a paragraph is half of it. The two scalars have no append form at all, which is the same line `append` already draws for a ticket. `campaign_set_offers_no_description_and_no_owner` pins it. No `--owner` either, because nothing writes a campaign's Owner today and giving `set` one would settle by accident whether `chown` grows a campaign; and no `--clear`, because a wrong codename is replaced rather than emptied and `Clearable` is `SetArgs`'s, its variants being a ticket's fields
- **The codename is written through `set_or_insert_metadata_field`, not `set_metadata_field`.** Every campaign filed before the field existed has no such line, and those are exactly the campaigns the command is for, which is the same reasoning that puts `assign` on the upsert. **`Codename` is therefore in `METADATA_ORDER`, directly after ID**, so an inserted one lands where `campaign_body` writes it and a campaign given a codename later is the same file as one filed with it. Nothing upserts it on a ticket, so its place in a ticket's order costs nothing
- **One write path for tickets and campaigns.** `save_entry` is the body, `save_ticket` and `save_campaign` are the named wrappers, and `write_then_replace` and `find_entry_file` take the noun as a `&str` so a failure says "campaign" where it is one. A campaign file is a ticket file in every way that matters here, `<uuid>_<slug>.md` in a directory, and the rename happens only after the write has landed. Every message puts the noun mid-sentence so there is no capital to case
- `campaign_body()` builds the file from `DESCRIPTION` and `METADATA_HEADING` rather than its own string literals, so the two file formats cannot drift apart on the spelling of a heading. A campaign has no acceptance criteria (its definition of done is derived), no implementation plan and no Status
- The campaigns directory is created by `init` and **on demand** by `campaign add`, since every board made before campaigns existed has none and a `worklane init` over a live board to get one would be a strange thing to have to do