(07ac4e1) Filter campaign ls by state, and lay its listing out as a table, and bump to 0.33.6

campaign ls printed every campaign and offered no way to narrow it, and the
row was assembled by hand, so a long title pushed the standing out of line
with the row above it and the created date the file already carries was not
shown at all.

--state takes open, done or empty and matches against Standing::state(),
so the derived value keeps one definition: a campaign reads [open] in the
listing if and only if --state open lists it. --state rather than --status,
which names one of the five ticket statuses everywhere else and would
invite --state backlog here. empty is the third value because an empty
campaign derives None deliberately, and a filter that could not reach those
would leave what has been filed and forgotten answerable only by reading
the whole listing. A filter that matches nothing names the value back,
since a silent listing reads as the other empty case.

The filter reaches --ids as well, the way ls --ids keeps its own, and is
the only thing that makes that path count members: an unfiltered completion
is as cheap as it was.

The columns are measured on the raw values and padded before anything is
painted, the rule metadata_cells follows. The codename is measured with the
title rather than given a column of its own: a campaign filed without one
spends nothing on it, so a column for it would be one most rows pad into
and some leave empty, and what a reader lines up is where a name ends and
its progress begins.

A flag's possible values now come off the command that holds the flag, so
campaign ls --state reaches ls's own arguments rather than campaign's. The
prompt offered nothing there while fish offered the three values, which
made a liar of the rule that a ValueEnum added anywhere is typeable on the
board the day it is added.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
Ansho Rei
2026-09-15 16:42:21 +02:00
co-authored by Claude Opus 5
parent 3e732535f8
commit 634a1f44c4
14 changed files with 448 additions and 30 deletions
+5
View File
@@ -14,6 +14,11 @@ The container that groups tickets across the flow, and why its state is derived.
- **`Resolved` carries what `content_trim` cannot render from the file.** The relations block and the campaign cell both come from elsewhere on the board. A struct rather than two more parameters, so the next such field is one entry here instead of an edit at every call site
- `campaign show` lists **done** members, unlike `ls`, which leaves the done column out of its listing. What is finished against what is left is the whole question a campaign asks, so hiding half the answer is not an option. `ls --campaign` is the other way round: it is the ordinary board filtered, and keeps every rule `ls` already has
- `campaign ls` scans the status directories **once per campaign** to count members. That is a scan per row rather than one walk reused, and it is deliberate: the map-from-uuid version is worth writing when a board has enough campaigns to notice
- **`campaign ls --state` filters on `Standing::state()`, never on the counters.** The derived value has one definition, so a campaign reads `[open]` in the listing if and only if `--state open` lists it. `--state` and not `--status`: the word names one of the five ticket statuses everywhere else in the tool, and a campaign sits in no status directory. The third value is `empty`, matching the `None` an empty campaign derives, because a filter that could not reach those would leave "what has been filed and forgotten" answerable only by reading the whole listing. A filter that matches nothing says so and repeats the value back, since a silent listing reads as the other empty case, a board with no campaigns on it
- **The filter reaches `--ids` as well, and is the only thing that makes that path count members.** `ls --ids` keeps its own filters, so this one keeps its. An unfiltered completion is as cheap as it was: `kept` returns true without reading a ticket when there is no filter to answer
- **The listing is a table, measured on the raw values and padded before anything is painted**, the rule `metadata_cells` follows. A column sized on a painted value counts its escape sequences towards its width, which is what tilts a table when colour is on and leaves it straight when it is off — the one combination an integration test running through a pipe can never see, which is why `the_campaign_table_stands_in_the_same_columns_coloured_or_not` renders both ways in one process and compares them with the escapes taken back off
- **The codename is measured with the title rather than given a column of its own.** A campaign filed without one spends nothing on it, so a column for it would be a column most rows pad into and some rows leave empty. What a reader lines up is where one campaign's name ends and its progress begins, which is one field: the name is the codename and the title together
- **The created stamp is `format_created_at`'s, the same form `ls` prints**, rather than a second spelling of a date. An unparseable one is empty there and the column goes, exactly as it does for a ticket
- **The TUI got a card label and a frame, not a campaign tab.** 61879a4 decided it. A tab would have had to answer what its columns are, and a campaign groups *across* the flow rather than within one status, so the honest answer is the four statuses filtered — which is a filter on the board it already has rather than a fifth tab. So: a label on the card, a frame above the columns while one is selected, and `c` for the picker. The cost the earlier decision balked at, a campaigns read per reload, is paid once per project in `columns_of` and is what names the label; see [The Board View](tui-board.md)
- **A campaign is named by its codename on the board, and by its short id when it has none.** The uuid does not fit on a card and the title is a sentence, which is the gap `Codename` fills. `campaign_label` builds it in one place, as a `Cell`, so the CLI paints it and the board makes a span of it; the mark is `CAMPAIGN_MARK`, `~`, beside `#` for a tag
- **`campaign set` and `campaign append` are the only writers of a filed campaign's fields.** d637288 decided the command: a `set` rather than a flag on something narrower, because the file has more than one editable thing and the moment somebody wants to fix a typo in a title there would be a second command to design. `set` carries `--title`, which renames the file the way `set --title` does, `--description` and `--codename`; `append` carries `--description` alone. `campaign add` writing a field at creation is not a second writer, exactly as `add --title` and `set --title` coexist
+1
View File
@@ -18,6 +18,7 @@ The generated half, the fish half, and what keeps the two honest.
- **A `ValueEnum` is never listed twice, and `argument_at` is why the fish half's two hand-written value lists are the only ones.** clap emits the possible values of an *option*, so `mv --status` and `set --clear` need nothing here and the board reads them off the same definition with `Arg::get_possible_values`. The `ls` status and the `completions` shell are positionals, which the fish generator emits nothing for, so those two are written into the block from the enums — and the board reaches them through `get_positionals`, which needs no `Command::build` the way `get_index` would
- **`RELATION_KIND_FLAGS` is the one position clap cannot answer for.** `relate --clear` takes a kind and then a target, two values of different kinds under one flag, so possible values on it would refuse every target. Both renderers therefore say so themselves: the fish rule lists `RelationKind::ALL` and the table names the pair
- **`ls --ids` is the machine-readable listing**, and one of the three outputs in the tree meant to be parsed: the short id, a tab, the title, unstyled. Two fields because fish reads what follows a tab as the description and a script reads `cut -f1`. It includes done, which the decorated listing leaves out, because a completion has to be able to name a finished ticket, and it skips a missing status directory rather than refusing, because an error printed over a shell prompt is worse than no candidates. The filters still apply, and an unknown `--campaign` is still refused
- **A flag's possible values are read off the command that *holds* the flag, nested or not.** `argument_at` resolves the group's child when the second word names one, so `campaign ls --state` reaches `ls`'s own arguments rather than `campaign`'s, which carry no such flag. Without that the prompt offered nothing where fish offered the three values, and the promise that a `ValueEnum` added anywhere is typeable on the board the day it is added held only for a top-level command
- **`campaign ls --ids` is the same flag and the same two fields for the other object**, and it deliberately skips the member counting the decorated listing does: `members()` reads every ticket on the board, and the caller here is a shell filling in candidates on a keypress. It also prints nothing on an empty board, where the decorated listing prints a sentence, because a sentence offered as a candidate is worse than no candidates
- **`worklane tags` is the third, and it is a command rather than a mode on `ls`.** Two reasons: `ls --tag <tag>` answers what carries a tag and cannot answer what tags exist, which is the question a grooming sweep starts from, and a `--tags` beside a `--tag` is one letter from a filter that means something else. Alphabetical and case sensitive, matching the filter, so `bug` and `Bug` list separately and land next to each other, which is where a near-duplicate is spotted. Every status, done included: a tag that has fallen out of use is still part of what the vocabulary has been. `assets/PLAN.md` used to tell the agent to count tags with a `show` per ticket, and now points here