(8556048) Take a relation off with relate --clear, and bump to 0.32.0
`relate` only added. A `--blocked-by` pointed at the wrong ticket was on that ticket forever, refusing every move it made until the target was done or `-f` was passed again, and a target that was deleted did not clean up either: the board carried a dead edge that nothing could clear and every later read of the ticket paid for. `--clear <kind> <target>` takes one off. It is on `relate` rather than on `set` for the reason `RELATIONS` is out of `section_args`: a relation names a target that has to be resolved first, so one writer owns both directions, the way `chown` owns setting an owner and clearing one. It names the target and not just the kind, because a ticket can hold several relations of one kind and emptying all of them is not what anybody is asking for. That is also why it is not spelled the way `set --clear` is, which names a field and empties it whole. Both spellings of the kind are taken, `blocked-by` from the flag and `blocked by` from the label: both are in front of the reader, the flag being what recorded the relation and the label what `show` prints and the file stores, so refusing the printed form would trap anyone clearing a row they had just read. `RelationKind::flag` is a match rather than a `replace` on the label, so the flag, the `--clear` value and the completion list cannot drift. `find_relation` searches the ticket's own edges by id prefix before it searches the board, and that order is the feature rather than an optimisation: no search of the board reaches a target whose ticket is gone, so the stored-target tier is the only thing that can clear a dangling edge, which is the case most likely to need clearing. Two stored targets under one prefix name the candidates instead of guessing, as an ambiguous ticket search already does. An edge the ticket does not hold reports no change, and a target naming nothing at all is an error. The two are different facts: the first is the state the caller asked for, and the second is a typo that a no-op would swallow. The resolver's own reason is carried through, so an ambiguous search says it is ambiguous rather than being reported as nothing found. Recording and clearing the same relation in one call is refused, and the check runs on what was *asked* for and not on what would be written. A relation already in the file is not among the additions, so comparing against those would have let `--blocked-by X --clear blocked-by X` quietly remove it. Removals rewrite the section from what is left and additions are appended to that, in that order and in two passes: a call with no `--clear` then takes exactly the path it always took. The last edge leaves the placeholder, which is the line `append` treats as no content, so the next `relate` replaces it rather than writing underneath it. The two values are one flag, so clap cannot type them apart. `num_args = 2` is per occurrence, which makes an odd number a usage error and every chunk a full pair, and `cleared` parses the kind before the ticket is resolved. Nothing is logged, in either direction, since `relate` never has: a log recording only the destructive half would read as though the additions had never happened. `chowns_clear_is_completed_with_tickets_and_sets_is_not` found the first rule carrying `-l clear` and there are now three, on three commands, each taking something different. It is `each_clear_flag_is_completed_for_its_own_command`, scoped per command, and `relate --clear` offers the kinds rather than a board listing, since tickets where the kind goes would be candidates it refuses. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
co-authored by
Claude Opus 5
parent
7994d98913
commit
0f0767ac00
@@ -13,7 +13,7 @@ Worklane is a local Kanban flow for agentic software development.
|
||||
| `worklane mv <id> --status <target> [-f]` | Moves ticket between statuses. Default: forward only, one stage at a time. `-f` bypasses both restrictions. `--status discarded` is exempt and reachable from anywhere, for a ticket that will not be done; leaving `discarded` is a backward move and needs `-f`. Discarding is refused while open tickets are blocked by the ticket, `-f` overrides. Records a `status` entry in the ticket's history, after the move: a refused or no-op move records nothing. `--actor` names the writer of that entry |
|
||||
| `worklane set <ticket>` | Replaces fields with `--title`, `--description`, `--acceptance`, `--plan`, `--tags`, `--due`, `--priority`. At least one required. Changing the title renames the file, keeping the UUID. `--clear <field>` returns a field to unset instead, repeatable, taking `due`, `tags`, `priority`, `description`, `acceptance` or `plan`, and writing back exactly what `add` writes for a field it was never given. No `title`, which addresses the ticket, and no `owner`, which is `chown`'s. Replacing and clearing the same field in one call is refused. `--tags` records a `tags` entry in the ticket's history, with the tags before and after, and it is the only field of this command's that is logged; `--actor` names the writer of that entry |
|
||||
| `worklane append <ticket>` | Adds to a section with `--description`, `--acceptance`, `--plan`. At least one required. The description gains a paragraph; list items go on the end, steps numbered on from the last |
|
||||
| `worklane relate <ticket>` | Records an edge to another ticket with `--blocked-by`, `--regression-of` or `--relates-to`, each repeatable. At least one required. Only the ticket named is written; `show` derives the other end by scanning. `mv` refuses to move a ticket blocked by one that is not done, unless `-f` |
|
||||
| `worklane relate <ticket>` | Records an edge to another ticket with `--blocked-by`, `--regression-of` or `--relates-to`, each repeatable. At least one required. Only the ticket named is written; `show` derives the other end by scanning. `mv` refuses to move a ticket blocked by one that is not done, unless `-f`. `--clear <kind> <target>` takes an edge off instead, repeatable, the kind spelled either way, `blocked-by` or `blocked by`. The target resolves against the edges the ticket holds first, by id prefix, which is the only way to reach one whose ticket has been deleted, then as an ordinary ticket search. An edge the ticket does not hold reports no change; a target naming nothing at all is an error. Recording and clearing the same edge in one call is refused |
|
||||
| `worklane chown <user> <ticket>` | Sets the Owner field, the only command that writes it. Free text, checked against nothing. User first and ticket second, after Unix `chown`. `worklane chown --clear <ticket>` returns the field to unset, taking the ticket in the flag since there is no user to give, and not to the git user `add` falls back to. Records an `owner` entry in the ticket's history, with the owner before and after; `--actor` names who made the change, which is not the same as the user argument |
|
||||
| `worklane check <ticket> [criteria...]` | Ticks acceptance criteria, each by number as shown by `show` or by a substring. Several in one call, or `all` for every one of them. Prompts with the numbered list if none is given, or errors with it when there is no terminal |
|
||||
| `worklane uncheck <ticket> [criteria...]` | Unticks acceptance criteria, addressed the same way |
|
||||
@@ -55,6 +55,7 @@ worklane mv <TAB> the same, then --status <TAB> for the five
|
||||
worklane chown alice <TAB> the ticket, which is the second argument here
|
||||
worklane chown --clear <TAB> the ticket, which the flag carries here
|
||||
worklane relate x --blocked-by <TAB>
|
||||
worklane relate x --clear <TAB> the three kinds, not a ticket: the kind comes first
|
||||
worklane campaign show <TAB> the campaigns, from `campaign ls --ids`
|
||||
worklane assign <TAB> the same, since a campaign comes first here
|
||||
worklane ls --campaign <TAB> and again
|
||||
|
||||
Reference in New Issue
Block a user