Removed #[allow(non_camel_case_types)] to fix issues

src/epd2in9/mod.rs

@@ -104,7 +104,7 @@ where
         // 0.. B[2:0]
         // Default Values: A = Height of Screen (0x127), B = 0x00 (GD, SM and TB=0?)
         self.interface
-            .cmd_with_data(spi, Command::DRIVER_OUTPUT_CONTROL, &[0x27, 0x01, 0x00])?;
+            .cmd_with_data(spi, Command::DriverOutputControl, &[0x27, 0x01, 0x00])?;
 
         // 3 Databytes: (and default values from datasheet and arduino)
         // 1 .. A[6:0]  = 0xCF | 0xD7
@@ -113,26 +113,26 @@ where
         //TODO: test
         self.interface.cmd_with_data(
             spi,
-            Command::BOOSTER_SOFT_START_CONTROL,
+            Command::BoosterSoftStartControl,
             &[0xD7, 0xD6, 0x9D],
         )?;
 
         // One Databyte with value 0xA8 for 7V VCOM
         self.interface
-            .cmd_with_data(spi, Command::WRITE_VCOM_REGISTER, &[0xA8])?;
+            .cmd_with_data(spi, Command::WriteVcomRegister, &[0xA8])?;
 
         // One Databyte with default value 0x1A for 4 dummy lines per gate
         self.interface
-            .cmd_with_data(spi, Command::SET_DUMMY_LINE_PERIOD, &[0x1A])?;
+            .cmd_with_data(spi, Command::SetDummyLinePeriod, &[0x1A])?;
 
         // One Databyte with default value 0x08 for 2us per line
         self.interface
-            .cmd_with_data(spi, Command::SET_GATE_LINE_WIDTH, &[0x08])?;
+            .cmd_with_data(spi, Command::SetGateLineWidth, &[0x08])?;
 
         // One Databyte with default value 0x03
         //  -> address: x increment, y increment, address counter is updated in x direction
         self.interface
-            .cmd_with_data(spi, Command::DATA_ENTRY_MODE_SETTING, &[0x03])?;
+            .cmd_with_data(spi, Command::DataEntryModeSetting, &[0x03])?;
 
         self.set_lut(spi, None)
     }
@@ -182,7 +182,7 @@ where
         // 0x00 for Normal mode (Power on Reset), 0x01 for Deep Sleep Mode
         //TODO: is 0x00 needed here? (see also epd1in54)
         self.interface
-            .cmd_with_data(spi, Command::DEEP_SLEEP_MODE, &[0x00])?;
+            .cmd_with_data(spi, Command::DeepSleepMode, &[0x00])?;
         Ok(())
     }
 
@@ -201,7 +201,7 @@ where
         self.use_full_frame(spi)?;
 
         self.interface
-            .cmd_with_data(spi, Command::WRITE_RAM, buffer)?;
+            .cmd_with_data(spi, Command::WriteRam, buffer)?;
         Ok(())
     }
 
@@ -220,7 +220,7 @@ where
         self.set_ram_counter(spi, x, y)?;
 
         self.interface
-            .cmd_with_data(spi, Command::WRITE_RAM, buffer)?;
+            .cmd_with_data(spi, Command::WriteRam, buffer)?;
         Ok(())
     }
 
@@ -229,9 +229,9 @@ where
         // enable clock signal, enable cp, display pattern -> 0xC4 (tested with the arduino version)
         //TODO: test control_1 or control_2 with default value 0xFF (from the datasheet)
         self.interface
-            .cmd_with_data(spi, Command::DISPLAY_UPDATE_CONTROL_2, &[0xC4])?;
+            .cmd_with_data(spi, Command::DisplayUpdateControl2, &[0xC4])?;
 
-        self.interface.cmd(spi, Command::MASTER_ACTIVATION)?;
+        self.interface.cmd(spi, Command::MasterActivation)?;
         // MASTER Activation should not be interupted to avoid currption of panel images
         // therefore a terminate command is send
         self.interface.cmd(spi, Command::NOP)?;
@@ -251,7 +251,7 @@ where
         // clear the ram with the background color
         let color = self.background_color.get_byte_value();
 
-        self.interface.cmd(spi, Command::WRITE_RAM)?;
+        self.interface.cmd(spi, Command::WriteRam)?;
         self.interface
             .data_x_times(spi, color, WIDTH / 8 * HEIGHT)?;
         Ok(())
@@ -319,14 +319,14 @@ where
         // aren't relevant
         self.interface.cmd_with_data(
             spi,
-            Command::SET_RAM_X_ADDRESS_START_END_POSITION,
+            Command::SetRamXAddressStartEndPosition,
             &[(start_x >> 3) as u8, (end_x >> 3) as u8],
         )?;
 
         // 2 Databytes: A[7:0] & 0..A[8] for each - start and end
         self.interface.cmd_with_data(
             spi,
-            Command::SET_RAM_Y_ADDRESS_START_END_POSITION,
+            Command::SetRamYAddressStartEndPosition,
             &[
                 start_y as u8,
                 (start_y >> 8) as u8,
@@ -341,12 +341,12 @@ where
         // x is positioned in bytes, so the last 3 bits which show the position inside a byte in the ram
         // aren't relevant
         self.interface
-            .cmd_with_data(spi, Command::SET_RAM_X_ADDRESS_COUNTER, &[(x >> 3) as u8])?;
+            .cmd_with_data(spi, Command::SetRamXAddressCounter, &[(x >> 3) as u8])?;
 
         // 2 Databytes: A[7:0] & 0..A[8]
         self.interface.cmd_with_data(
             spi,
-            Command::SET_RAM_Y_ADDRESS_COUNTER,
+            Command::SetRamYAddressCounter,
             &[y as u8, (y >> 8) as u8],
         )?;
         Ok(())
@@ -357,7 +357,7 @@ where
         self.wait_until_idle();
         assert!(buffer.len() == 30);
         self.interface
-            .cmd_with_data(spi, Command::WRITE_LUT_REGISTER, buffer)?;
+            .cmd_with_data(spi, Command::WriteLutRegister, buffer)?;
         Ok(())
     }
 }