Update to new error type from eh 1.0a6

examples/epd1in54_no_graphics.rs

@@ -7,12 +7,15 @@ use linux_embedded_hal::{
     sysfs_gpio::Direction,
     Delay, Spidev, SysfsPin as Pin,
 };
+use core::convert::Infallible;
+use linux_embedded_hal::SPIError;
+
 
 // activate spi, gpio in raspi-config
 // needs to be run with sudo because of some sysfs_gpio permission problems and follow-up timing problems
 // see https://github.com/rust-embedded/rust-sysfs-gpio/issues/5 and follow-up issues
 
-fn main() -> Result<(), linux_embedded_hal::SPIError> {
+fn main() -> Result<(), epd_waveshare::Error<SPIError, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, Infallible>> {
     // Configure SPI
     // SPI settings are from eink-waveshare-rs documenation
     let mut spi = Spidev::open("/dev/spidev0.0")?;

examples/epd2in13_v2.rs

@@ -18,12 +18,15 @@ use linux_embedded_hal::{
     sysfs_gpio::Direction,
     Delay, Spidev, SysfsPin as Pin,
 };
+use core::convert::Infallible;
+use linux_embedded_hal::SPIError;
+
 
 // activate spi, gpio in raspi-config
 // needs to be run with sudo because of some sysfs_gpio permission problems and follow-up timing problems
 // see https://github.com/rust-embedded/rust-sysfs-gpio/issues/5 and follow-up issues
 
-fn main() -> Result<(), linux_embedded_hal::SPIError> {
+fn main() -> Result<(), epd_waveshare::Error<SPIError, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, Infallible>> {
     // Configure SPI
     // Settings are taken from
     let mut spi = Spidev::open("/dev/spidev0.0").expect("spidev directory");

examples/epd2in13bc.rs

@@ -18,6 +18,9 @@ use linux_embedded_hal::{
     sysfs_gpio::Direction,
     Delay, Spidev, SysfsPin as Pin,
 };
+use core::convert::Infallible;
+use linux_embedded_hal::SPIError;
+
 
 // activate spi, gpio in raspi-config
 // needs to be run with sudo because of some sysfs_gpio permission problems and follow-up timing problems
@@ -34,7 +37,7 @@ use linux_embedded_hal::{
 //
 // after finishing, put the display to sleep
 
-fn main() -> Result<(), linux_embedded_hal::SPIError> {
+fn main() -> Result<(), epd_waveshare::Error<SPIError, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, Infallible>> {
     let busy = Pin::new(24); // GPIO 24, board J-18
     busy.export().expect("busy export");
     while !busy.is_exported() {}

examples/epd4in2.rs

@@ -18,12 +18,14 @@ use linux_embedded_hal::{
     sysfs_gpio::Direction,
     Delay, Spidev, SysfsPin as Pin,
 };
+use core::convert::Infallible;
+use linux_embedded_hal::SPIError;
 
 // activate spi, gpio in raspi-config
 // needs to be run with sudo because of some sysfs_gpio permission problems and follow-up timing problems
 // see https://github.com/rust-embedded/rust-sysfs-gpio/issues/5 and follow-up issues
 
-fn main() -> Result<(), linux_embedded_hal::SPIError> {
+fn main() -> Result<(), epd_waveshare::Error<SPIError, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, Infallible>> {
     // Configure SPI
     // Settings are taken from
     let mut spi = Spidev::open("/dev/spidev0.0").expect("spidev directory");

examples/epd4in2_variable_size.rs

@@ -19,12 +19,16 @@ use linux_embedded_hal::{
     sysfs_gpio::Direction,
     Delay, Spidev, SysfsPin as Pin,
 };
+use core::convert::Infallible;
+use linux_embedded_hal::SPIError;
+
+
 
 // activate spi, gpio in raspi-config
 // needs to be run with sudo because of some sysfs_gpio permission problems and follow-up timing problems
 // see https://github.com/rust-embedded/rust-sysfs-gpio/issues/5 and follow-up issues
 
-fn main() -> Result<(), linux_embedded_hal::SPIError> {
+fn main() -> Result<(), epd_waveshare::Error<SPIError, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, linux_embedded_hal::sysfs_gpio::Error, Infallible>> {
     // Configure SPI
     // Settings are taken from
     let mut spi = Spidev::open("/dev/spidev0.0").expect("spidev directory");