Further improvements around acronym lowercases,...

src/epd7in5/command.rs

@@ -2,7 +2,7 @@
 
 use crate::traits;
 
-/// EPD7in5 commands
+/// Epd7in5 commands
 ///
 /// Should rarely (never?) be needed directly.
 ///
@@ -93,7 +93,7 @@ pub(crate) enum Command {
     PllControl = 0x30,
 
     /// This command reads the temperature sensed by the temperature sensor.
-    TemperatureSensorCommand = 0x40,
+    TemperatureSensor = 0x40,
     /// This command selects the Internal or External temperature sensor.
     TemperatureCalibration = 0x41,
     /// This command could write data to the external temperature sensor.
@@ -117,7 +117,7 @@ pub(crate) enum Command {
     SpiFlashControl = 0x65,
 
     /// The LUT_REV / Chip Revision is read from OTP address = 25001 and 25000.
-    REVISION = 0x70,
+    Revision = 0x70,
     /// This command reads the IC status.
     GetStatus = 0x71,
 
@@ -128,7 +128,7 @@ pub(crate) enum Command {
     /// This command sets `VCOM_DC` value.
     VcmDcSetting = 0x82,
 
-    /// This is in all the Waveshare controllers for EPD7in5, but it's not documented
+    /// This is in all the Waveshare controllers for Epd7in5, but it's not documented
     /// anywhere in the datasheet `¯\_(ツ)_/¯`
     FlashMode = 0xE5,
 }

src/epd7in5/mod.rs

@@ -13,7 +13,7 @@ use embedded_hal::{
 
 use crate::color::Color;
 use crate::interface::DisplayInterface;
-use crate::traits::{InternalWiAdditions, RefreshLUT, WaveshareDisplay};
+use crate::traits::{InternalWiAdditions, RefreshLut, WaveshareDisplay};
 
 pub(crate) mod command;
 use self::command::Command;
@@ -31,9 +31,9 @@ pub const HEIGHT: u32 = 384;
 pub const DEFAULT_BACKGROUND_COLOR: Color = Color::White;
 const IS_BUSY_LOW: bool = true;
 
-/// EPD7in5 driver
+/// Epd7in5 driver
 ///
-pub struct EPD7in5<SPI, CS, BUSY, DC, RST> {
+pub struct Epd7in5<SPI, CS, BUSY, DC, RST> {
     /// Connection Interface
     interface: DisplayInterface<SPI, CS, BUSY, DC, RST>,
     /// Background Color
@@ -41,7 +41,7 @@ pub struct EPD7in5<SPI, CS, BUSY, DC, RST> {
 }
 
 impl<SPI, CS, BUSY, DC, RST> InternalWiAdditions<SPI, CS, BUSY, DC, RST>
-    for EPD7in5<SPI, CS, BUSY, DC, RST>
+    for Epd7in5<SPI, CS, BUSY, DC, RST>
 where
     SPI: Write<u8>,
     CS: OutputPin,
@@ -91,7 +91,7 @@ where
         // Set VCOM_DC to -1.5V
         self.cmd_with_data(spi, Command::VcmDcSetting, &[0x1E])?;
 
-        // This is in all the Waveshare controllers for EPD7in5
+        // This is in all the Waveshare controllers for Epd7in5
         self.cmd_with_data(spi, Command::FlashMode, &[0x03])?;
 
         self.wait_until_idle();
@@ -100,7 +100,7 @@ where
 }
 
 impl<SPI, CS, BUSY, DC, RST> WaveshareDisplay<SPI, CS, BUSY, DC, RST>
-    for EPD7in5<SPI, CS, BUSY, DC, RST>
+    for Epd7in5<SPI, CS, BUSY, DC, RST>
 where
     SPI: Write<u8>,
     CS: OutputPin,
@@ -120,7 +120,7 @@ where
         let interface = DisplayInterface::new(cs, busy, dc, rst);
         let color = DEFAULT_BACKGROUND_COLOR;
 
-        let mut epd = EPD7in5 { interface, color };
+        let mut epd = Epd7in5 { interface, color };
 
         epd.init(spi, delay)?;
 
@@ -214,7 +214,7 @@ where
     fn set_lut(
         &mut self,
         _spi: &mut SPI,
-        _refresh_rate: Option<RefreshLUT>,
+        _refresh_rate: Option<RefreshLut>,
     ) -> Result<(), SPI::Error> {
         unimplemented!();
     }
@@ -224,7 +224,7 @@ where
     }
 }
 
-impl<SPI, CS, BUSY, DC, RST> EPD7in5<SPI, CS, BUSY, DC, RST>
+impl<SPI, CS, BUSY, DC, RST> Epd7in5<SPI, CS, BUSY, DC, RST>
 where
     SPI: Write<u8>,
     CS: OutputPin,