Further improvements around acronym lowercases,...

examples/epd1in54_no_graphics.rs

@@ -1,7 +1,7 @@
 #![deny(warnings)]
 
 use embedded_hal::prelude::*;
-use epd_waveshare::{epd1in54::EPD1in54, prelude::*};
+use epd_waveshare::{epd1in54::Epd1in54, prelude::*};
 use linux_embedded_hal::{
     spidev::{self, SpidevOptions},
     sysfs_gpio::Direction,
@@ -58,14 +58,14 @@ fn main() -> Result<(), std::io::Error> {
 
     // Setup of the needed pins is finished here
     // Now the "real" usage of the eink-waveshare-rs crate begins
-    let mut epd = EPD1in54::new(&mut spi, cs_pin, busy, dc, rst, &mut delay)?;
+    let mut epd = Epd1in54::new(&mut spi, cs_pin, busy, dc, rst, &mut delay)?;
 
     // Clear the full screen
     epd.clear_frame(&mut spi)?;
     epd.display_frame(&mut spi)?;
 
     // Speeddemo
-    epd.set_lut(&mut spi, Some(RefreshLUT::QUICK))?;
+    epd.set_lut(&mut spi, Some(RefreshLut::Quick))?;
     let small_buffer = [Color::Black.get_byte_value(); 32]; //16x16
     let number_of_runs = 1;
     for i in 0..number_of_runs {

examples/epd2in13_v2.rs

@@ -10,7 +10,7 @@ use embedded_graphics::{
 use embedded_hal::prelude::*;
 use epd_waveshare::{
     color::*,
-    epd2in13_v2::{Display2in13, EPD2in13},
+    epd2in13_v2::{Display2in13, Epd2in13},
     graphics::{Display, DisplayRotation},
     prelude::*,
 };
@@ -63,7 +63,7 @@ fn main() -> Result<(), std::io::Error> {
     let mut delay = Delay {};
 
     let mut epd2in13 =
-        EPD2in13::new(&mut spi, cs, busy, dc, rst, &mut delay).expect("eink initalize error");
+        Epd2in13::new(&mut spi, cs, busy, dc, rst, &mut delay).expect("eink initalize error");
 
     //println!("Test all the rotations");
     let mut display = Display2in13::default();
@@ -121,7 +121,7 @@ fn main() -> Result<(), std::io::Error> {
     // Demonstrating how to use the partial refresh feature of the screen.
     // Real animations can be used.
     epd2in13
-        .set_refresh(&mut spi, &mut delay, RefreshLUT::QUICK)
+        .set_refresh(&mut spi, &mut delay, RefreshLut::Quick)
         .unwrap();
     epd2in13.clear_frame(&mut spi).unwrap();
 

examples/epd4in2.rs

@@ -10,7 +10,7 @@ use embedded_graphics::{
 use embedded_hal::prelude::*;
 use epd_waveshare::{
     color::*,
-    epd4in2::{Display4in2, EPD4in2},
+    epd4in2::{Display4in2, Epd4in2},
     graphics::{Display, DisplayRotation},
     prelude::*,
 };
@@ -63,7 +63,7 @@ fn main() -> Result<(), std::io::Error> {
     let mut delay = Delay {};
 
     let mut epd4in2 =
-        EPD4in2::new(&mut spi, cs, busy, dc, rst, &mut delay).expect("eink initalize error");
+        Epd4in2::new(&mut spi, cs, busy, dc, rst, &mut delay).expect("eink initalize error");
 
     //println!("Test all the rotations");
     let mut display = Display4in2::default();
@@ -120,7 +120,7 @@ fn main() -> Result<(), std::io::Error> {
 
     // a moving `Hello World!`
     let limit = 10;
-    epd4in2.set_lut(&mut spi, Some(RefreshLUT::QUICK)).unwrap();
+    epd4in2.set_lut(&mut spi, Some(RefreshLut::Quick)).unwrap();
     epd4in2.clear_frame(&mut spi).unwrap();
     for i in 0..limit {
         //println!("Moving Hello World. Loop {} from {}", (i + 1), limit);

examples/epd4in2_variable_size.rs

@@ -11,7 +11,7 @@ use embedded_graphics::{
 use embedded_hal::prelude::*;
 use epd_waveshare::{
     color::*,
-    epd4in2::{self, EPD4in2},
+    epd4in2::{self, Epd4in2},
     graphics::{Display, DisplayRotation, VarDisplay},
     prelude::*,
 };
@@ -64,7 +64,7 @@ fn main() -> Result<(), std::io::Error> {
     let mut delay = Delay {};
 
     let mut epd4in2 =
-        EPD4in2::new(&mut spi, cs, busy, dc, rst, &mut delay).expect("eink initalize error");
+        Epd4in2::new(&mut spi, cs, busy, dc, rst, &mut delay).expect("eink initalize error");
 
     println!("Test all the rotations");