diff --git a/README.md b/README.md
index 53dce45..cae4649 100644
--- a/README.md
+++ b/README.md
@@ -1,21 +1,38 @@
-[![Build Status](https://travis-ci.com/Caemor/eink-waveshare-rs.svg?branch=master)](https://travis-ci.com/Caemor/eink-waveshare-rs)
+# eink-waveshare-rs [![Build Status](https://travis-ci.com/Caemor/eink-waveshare-rs.svg?branch=master)](https://travis-ci.com/Caemor/eink-waveshare-rs)
 
-# eink-waveshare-rs
+This library contains a driver for the [4.2 Inch E-Paper Moduel](https://www.waveshare.com/wiki/4.2inch_e-Paper_Module) from Waveshare.
 
-IN WORK! Drivers for various EPDs from Waveshare. 
+Support for more (especially the smaller and faster ones) should follow after the library around the 4.2" EInk is stable and tested enough.
+
+
+## 4.2 Inch E-Ink
+
+Out of the Box the original driver from Waveshare supported only full updates. 
 
 Currently only support for the 4.2 Black/White one
 
 Be careful with the partial updates!
 It was only tested in a mBED implementation, the rust one wasn't tested enough yet!!!
 
+### Interface
+
+| Interface | Description |
+| :---: |  :---: |
+| VCC 	|   3.3V |
+| GND   | 	GND |
+| DIN   | 	SPI MOSI |
+| CLK   | 	SPI SCK |
+| CS    | 	SPI chip select (Low active) |
+| DC    | 	Data/Command control pin (High for data, and low for command) |
+| RST   | 	External reset pin (Low for reset) |
+| BUSY  | 	Busy state output pin (Low for busy)  |
+
 ## TODO's
 
-- [ ] add more example (e.g. for f3)
+- [ ] add more examples (e.g. for f3)
 - [ ] improve the partial drawing/check the timings/timing improvements/....
 - [ ] for later: add support for the smaller waveshare epds
-- [ ] License: Stay with ISC (=MIT) or go to Apache+MIT Dual Version as used in many other projects?
-
+- [ ] License: Stay with ISC (=MIT) or go to the Apache+MIT Dual License as used in many other projects?
 
 ## Graphics/Drawing
 
@@ -31,17 +48,6 @@ Chars and Strings work with a 8x8-Font.
 
 Support for bigger sized/independent Fonts is in work.
 
-
-### With a Buffer
-
-- Chars, Strings and filled circles are still missing
-- maybe work with traits here for line_drawing and so on?
-
-### Without a Buffer
-
-Maybe add support for Non-Buffer drawing from the https://crates.io/crates/embedded-graphics Crate later on.
-
-
 ## Examples
 
 There is an example for Raspberry Pi in the example folder.